Dell PowerEdge 1955 Bedienungsanleitung

Rack Installation Guide

Guide d'installation du rack

Rack-Installationsanleitung

ラック取り付けガイド

Guía de instalación del rack

Rack Installation Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: RapidRails and VersaRails are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names

or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

July 2005 P/N F3159 Rev. A01

Contents 3

Contents

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SAFETY: Rack Mounting of Systems . . . . . . . . . . . . . . . . . . . . . 5

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Recommended Tools and Supplies . . . . . . . . . . . . . . . . . . . . . . 7

RapidRails Rack Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . 7

VersaRails Rack Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . 8

Removing the Rack Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Marking the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing the RapidRails Assemblies . . . . . . . . . . . . . . . . . . . . . . 10

Installing the VersaRails Assemblies . . . . . . . . . . . . . . . . . . . . . . 11

Installing the System in the Rack . . . . . . . . . . . . . . . . . . . . . . . . 12

Routing Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Replacing the Rack Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Figures

Figure 1-1. RapidRails Rack Kit Contents . . . . . . . . . . . . . 8

Figure 1-2. VersaRails Rack Kit Contents . . . . . . . . . . . . . 8

Figure 1-3. One Rack Unit . . . . . . . . . . . . . . . . . . . . . 9

Figure 1-4. Marking the Vertical Rails . . . . . . . . . . . . . . 10

Figure 1-5. Installing the RapidRails Assemblies . . . . . . . . . 11

Figure 1-6. Installing the VersaRails Rail Assemblies . . . . . . 12

Figure 1-7. Installing the System in the Rack . . . . . . . . . . . 13

Figure 1-8. Securing the Cables to the Rack . . . . . . . . . . . 14

4Contents

Rack Installation Guide 5

Safety Instructions

Use the following safety guidelines to help ensure your own personal safety and to help protect

your system and working environment from potential damage. For complete safety information,

see the

Product Information

Guide

SAFETY: Rack Mounting of Systems

Observe the following precautions for rack stability and safety.

Systems are considered to be components in a rack. Thus, "component" refers to any system as well

as to various peripherals or supporting hardware.

CAUTION: Before installing systems in a rack, install front and side stabilizers on stand-alone racks

or the front stabilizer on racks joined to other racks. Failure to install stabilizers accordingly before

installing systems in a rack could cause the rack to tip over, potentially resulting in bodily injury under

certain circumstances. Therefore, always install the stabilizer(s) before installing components in the

rack.

CAUTION: After installing system/components in a rack, never pull more than one component out of

the rack on its slide assemblies at one time. The weight of more than one extended component could

cause the rack to tip over and injure someone.

NOTE: Your system is safety-certified as a free-standing unit and as a component for use in a rack

cabinet using the customer rack kit when both the rack cabinet and rack kit were designed for your

system. The installation of your system and rack kit in any other rack cabinet has not been

approved by any safety agencies. It is your responsibility to have the final combination of system

and rack kit in a cabinet evaluated for suitability by a certified safety agency. The manufacturer

disclaims all warranties and liability in connection with such combinations.

•

System rack kits are intended to be installed in an approved rack by trained service

technicians. If you install the kit in any other rack, be sure that the rack meets the

specifications.

• Before working on the rack, make sure that the stabilizers are secured to the rack, extended to

the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers

on a single rack or front stabilizers for joined multiple racks before working on the rack.

• Always load the rack from the bottom up, and load the heaviest item in the rack first.

• Make sure that the rack is level and stable before extending a component from the rack.

• Do not overload the AC power supply branch circuit that provides power to the rack.

The total rack load should not exceed 80 percent of the branch circuit rating.

• Ensure that proper airflow is provided to components in the rack.

• Do not step on or stand on any system/component when servicing other systems/components

in a rack.

6Rack Installation Guide

Installation Instructions

This installation guide provides instructions for trained service technicians installing one or more

systems in an open-frame relay rack or in a rack cabinet. The RapidRails™ rack kit can be installed

without tools in manufacturer’s rack cabinets that have square holes; the VersaRails™ rack kit can

be installed in most industry-standard rack cabinets that have square or round holes. The

procedures for installing both RapidRails and VersaRails rack kits are similar. One rack kit is

required for each system installed in the rack.

CAUTION: Do not install rack kit components designed for another system. Use only the rack kit for

your system. Using the rack kit for another system may result in damage to the system and personal

injury.

The VersaRails rack kit can be installed in most industry-standard rack cabinets.

NOTICE: The VersaRails rack kit is intended to be installed by trained service technicians in a rack that

meets the specifications of American National Standards Institute (ANSI)/Electronic Industries

Association (EIA) standard ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and

Deutsche Industrie Norm (DIN) 41494. One rack kit is required for each system that is installed in a rack.

Before You Begin

Before you begin installing your system in the rack, carefully read "Safety Instructions," found

earlier in this guide, as well as the safety instructions found in your

Product Information Guide

for

additional information.

CAUTION: When installing multiple systems in a rack, complete all of the procedures for the current

system before attempting to install the next system.

CAUTION: Rack cabinets can be extremely heavy and move easily on the casters. The cabinet has no

brakes. Use extreme caution while moving the rack cabinet. Retract the leveling feet when relocating

the rack cabinet. Avoid long or steep inclines or ramps where loss of cabinet control may occur. Extend

the leveling feet for support and to prevent the cabinet from rolling.

Important Safety Information

Observe the safety precautions in the following subsections when installing your system in the rack.

CAUTION: You must strictly follow the procedures in this document to protect yourself as well as

others who may be involved. Your system may be very large and heavy, and proper preparation and

planning are important to prevent injury to yourself and to others. This becomes increasingly important

when systems are installed high up in the rack.

Rack Stabilizer Feet

CAUTION: Before installing systems in a rack, install front and side stabilizers on stand-alone racks

or the front stabilizer on racks joined to other racks. Failure to install stabilizers accordingly before

installing systems in a rack could cause the rack to tip over, potentially resulting in bodily injury under

certain circumstances. Therefore, always install the stabilizer(s) before installing components in the

rack.

Rack Installation Guide 7

CAUTION: After installing systems in a rack, never pull more than one system out of the rack on its

slide assemblies at one time. The weight of more than one extended system could cause the rack

to tip over and cause injury.

The stabilizer feet help prevent the rack from tipping over when a system or other component is

pulled out of the rack with the slide assemblies fully extended. See the documentation provided

with the rack cabinet for instructions on installing and anchoring the stabilizer feet.

Installation Tasks

Installing a rack kit involves performing the following tasks in their numbered order:

Removing the rack doors

Marking the rack (if necessary)

Installing the rail assemblies in the rack:

• RapidRails installation

• VersaRails installation

Installing the system in the rack

Routing cables

Replacing the rack doors

Recommended Tools and Supplies

• A #2 Phillips screwdriver

• Masking tape or a felt-tip pen, for use in marking the mounting holes to be used

• A measuring ruler or tape measure

RapidRails Rack Kit Contents

The RapidRails rack kit includes the following items (see Figure 1-1):

• One pair of RapidRails assemblies

• Four reusable tie wraps

8Rack Installation Guide

Figure 1-1. RapidRails Rack Kit Contents

VersaRails Rack Kit Contents

The VersaRails rack kit includes the following items (see Figure 1-2):

• One pair of VersaRails assemblies

• Four reusable tie wraps

• Twelve 10-32 x 0.5-inch flange-head Phillips screws

NOTE: Nonmetric screws are identified in this document by size and number of threads per inch.

For example, a #10 Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.

Figure 1-2. VersaRails Rack Kit Contents

RapidRails assemblies

tie-wraps (4)

10-32 x 0.5-inch flange-

head Phillips screws (12)

VersaRails assemblies

tie-wraps (4)

Andere Handbücher für PowerEdge 1955

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell wyse V00 Bedienungsanleitung

Dell

Dell 8 Bedienungsanleitung

Dell

Dell poweredge VRTX Bedienungsanleitung

Dell

Dell PowerEdge C8000XD Bedienungsanleitung

Dell

Dell PowerEdge T100 Technisches Handbuch

Dell

Dell PowerEdge C8000 Bedienungsanleitung

Dell

Dell PowerEdge T420 Kurzanleitung

Dell

Dell PowerEdge FC830 Bedienungsanleitung

Dell

Dell PowerEdge R300 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

Dell

Dell PowerEdge C5220 Bedienungsanleitung

Dell

Dell PowerEdge 6850 Handbuch

Dell

Dell KGR3H Handbuch

Dell

Dell PowerEdge 6800 Technisches Handbuch

Dell

Dell EMC PowerEdge R440 Handbuch

Dell

Dell PowerEdge R415 Bedienungsanleitung

Dell

Dell PowerEdge R310 Bedienungsanleitung

Dell

Dell PowerEdge R210 Bedienungsanleitung

Dell

Dell PowerEdge systems 6300 Bedienungsanleitung

Dell

Dell PowerEdge M630 Bedienungsanleitung

Dell

Dell PowerEdge T310 Kurzanleitung

Dell

Dell PowerEdge 1550 Bedienungsanleitung

Dell

Dell PowerEdge UPS 500T Bedienungsanleitung

Dell

Dell PowerEdge SC1425 Leitfaden

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch