Dell PowerVault 530F Bedienungsanleitung









____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.

Trademarks used in this text: Dell, the DELL E COM logo, and PowerVault are trademarks of Dell Computer Corporation; Intel and

Pentium are registered trademarks and Xeon is a trademark of Intel Corporation; Microsoft, Windows, and Windows NT are regis-

tered trademarks of Microsoft Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their

products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.

June 2000 P/N 78GYX Rev. A00



Use the following safety guidelines to ensure your own personal safety and to help

protect your server, storage system, or appliance from potential damage.



Throughout this guide, blocks of text may be accompanied by an icon and printed in

bold type or in italic type. These blocks are notes, notices, cautions, and warnings,

and they are used as follows:

NOTE: A NOTE indicates important information that helps you make better use of

your computer system.





  !"

"#

$%&$%&!"

"#



Observe the following caution and warnings while servicing this system:

 '

%()

*

+

$%&

!"

!



*,-"*,./0

"*,

$%&

11")



 !"#$% &'()

*+,+% -* ,.'%*+%/!*.0#.1 &2%'/*+$+%

!30!*"04*+..0!#+'2$ !"#% &'(

*.%02*1314

1113"311

131"3

.% 055#5#5511#05)

1615116

111##5#5



 !"#$%&$'

(#) $#* "

"$)'

5657+89+:#+7#0% &', +' + (;&

,+#,8*,%!* 7+ !*<01!*,0 !* 9<'.&%*9 #<.

9,%+% &', +' + !9+&80=<,!*,,!*,,%'>$+% 

&=.>+(

*.%027*83

9311913)

339

.%&*151611

91516611

6116



To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions.



Observe the following general precautions for using and working with your system:

Observe and follow service markings. Do not service any Dell product except as

explained in your Dell system documentation. Opening or removing covers that

are marked with the triangular symbol with a lightning bolt may expose you to

electrical shock. Components inside these compartments should be serviced

only by a Dell authorized service technician.

If any of the following conditions occur, unplug the product from the electrical

outlet and replace the part or contact your Dell authorized service provider:

— The power cable, extension cable, or plug is damaged.

vii

—An object has fallen into the product.

—The product has been exposed to water.

—The product has been dropped or damaged.

—The product does not operate correctly when you follow the operating

instructions.

Keep your system components away from radiators and heat sources. Also, do

not block cooling vents.

Do not spill food or liquids on your system components, and never operate the

product in a wet environment. If the computer gets wet, see the appropriate

chapter in your troubleshooting guide or contact a Dell-authorized service

provider.

Do not push any objects into the openings of your system components. Doing so

can cause fire or electric shock by shorting out interior components.

Use the product only with Dell products or other Dell-approved equipment.

Allow the product to cool before removing covers or touching internal

components.

Use the correct external power source. Operate the product only from the type

of power source indicated on the electrical ratings label. If you are not sure of the

type of power source required, consult your Dell service provider or local power

company.

To help avoid damaging your system components, be sure the voltage selection

switch (if provided) on the power supply is set to match the power available at

your location:

—115 volts (V)/60 hertz (Hz) in most of North and South America and some Far

Eastern countries such as South Korea and Taiwan

—100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan

—230 V/50 Hz in most of Europe, the Middle East, and the Far East

Also be sure that your monitor and attached devices are electrically rated to oper-

ate with the power available in your location.

Use only approved power cable(s). If you have not been provided with a power

cable for your server, storage system, or appliance, or for any AC-powered option

intended for your system, purchase a power cable that is approved for use in your

country. The power cable must be rated for the product and for the voltage and

current marked on the product’s electrical ratings label. The voltage and current

rating of the cable should be greater than the ratings marked on the product.

To help prevent electric shock, plug the system/components and peripheral

power cables into properly grounded electrical outlets. These cables are

equipped with three-prong plugs to help ensure proper grounding. Do not use

adapter plugs or remove the grounding prong from a cable. If you must use an

extension cable, use a three-wire cable with properly grounded plugs.

viii

Observe extension cable and power strip ratings. Make sure that the total

ampere rating of all products plugged into the extension cable or power strip

does not exceed 80 percent of the extension cable or power strip ampere ratings

limit.

To help protect your system/components from sudden, transient increases and

decreases in electrical power, use a surge suppressor, line conditioner, or un-

interruptible power supply (UPS).

Position system cables and power cables carefully; route system cables and the

power cable and plug so that they cannot be stepped on or tripped over. Be sure

that nothing rests on your system components’cables or power cable.

Do not modify power cables or plugs. Consult a licensed electrician or your

power company for site modifications. Always follow your local/national wiring

rules.

To help avoid possible damage to the system board, wait 5 seconds after turning

off the system before removing a component from the system board or discon-

necting a peripheral device from the computer.

Handle batteries carefully. Do not disassemble, crush, puncture, short external

contacts, dispose of in fire or water, or expose batteries to temperatures higher

than 60 degrees Celsius (140 degrees Fahrenheit). Do not attempt to open or ser-

vice batteries; replace batteries only with batteries designated for the product.

Turn down the volume before using headphones or other audio devices.



Observe the following additional safety guidelines for your system:

Unless your installation and/or troubleshooting documentation specifically allows

it, do not remove enclosure covers, attempt to override the safety interlocks, or

access any components inside the system. Depending on your system, installa-

tion and repairs may be done only by individuals who are qualified to service your

computer or storage system equipment and trained to deal with products capa-

ble of producing hazardous energy levels.

When connecting or disconnecting power to hot-pluggable power supplies, if

offered with your Dell product, observe the following guidelines:

—Install the power supply before connecting the power cable to the power

supply.

—Unplug the power cable before removing the power supply.

—If the system has multiple sources of power, disconnect power from the sys-

tem by unplugging all power cables from the power supplies.

Move products with care; ensure that all casters and/or stabilizers are firmly con-

nected to the computer or storage system. Avoid sudden stops and uneven

surfaces.



Observe the following precautions for rack stability and safety. Also refer to the rack

installation documentation accompanying the system and the rack for specific warn-

ing and/or caution statements and procedures.

Servers, storage systems, and appliances are considered to be components in a rack.

Thus, “component”refers to any server, storage system, or appliance, as well as to

various peripherals or supporting hardware.

$%&**1

!1")

#"

!1

:1"

1

'1

#

NOTE: Dell’s servers, storage systems, and appliances are certified as components

for use in Dell’s rack cabinet using the Dell customer rack kit. The final installation of

Dell systems and rack kits in any other brand of rack cabinet has not been approved by

any safety agencies. It is the customer’s responsibility to have the final combination of

Dell systems and rack kits for use in other brands of rack cabinets evaluated for suit-

ability by a certified safety agency.

System rack kits are intended to be installed in a Dell rack by trained service tech-

nicians. If you install the kit in any other rack, be sure that the rack meets the

specifications of a Dell rack.

Do not move large racks by yourself. Due to the height and weight of the rack,

Dell recommends a minimum of two people to accomplish this task.

Before working on the rack, make sure that the stabilizers are secure to the rack,

extend to the floor, and that the full weight of the rack rests on the floor. Install

front and side stabilizers on a single rack or front stabilizers for joined multiple

racks before working on the rack.

Always load the rack from the bottom up, and load the heaviest item in the rack

first.

Make sure that the rack is level and stable before extending a component from

the rack.

Use caution when pressing the component rail release latches and sliding a com-

ponent into or out of a rack; the slide rails can pinch your fingers.

After a component is inserted into the rack, carefully extend the rail into a locking

position, and then slide the component into the rack.

Do not overload the AC supply branch circuit that provides power to the rack. The

total rack load should not exceed 80 percent of the branch circuit rating.

Ensure that proper airflow is provided to components in the rack.

Do not step on or stand on any system/component when servicing other sys-

tems/components in a rack.

 

!"#$%

Observe the following guidelines when working with options:

Do not connect or use a modem or telephone during a lightning storm. There

may be a risk of electrical shock from lightning.

Never connect or use a modem or telephone in a wet environment.

Do not plug a modem or telephone cable into the network interface controller

(NIC) receptacle.

Disconnect the modem cable before opening a product enclosure, touching or

installing internal components, or touching an uninsulated modem cable or jack.

Do not use a telephone line to report a gas leak while you are in the vicinity of the

leak.

 "&

Observe the following precautions for laser devices:

Do not open any panels, operate controls, make adjustments, or perform proce-

dures on a laser device other than those specified in the product’s

documentation.

Only authorized service technicians should repair laser devices.



Before you remove the computer covers, perform the following steps in the sequence

indicated.

 0*)

!*

"''

*



";)





1. Turn off your computer and any devices.

2. Ground yourself by touching an unpainted metal surface on the chassis, such as

the metal around the card-slot openings at the back of the computer, before

touching anything inside your computer.

While you work, periodically touch an unpainted metal surface on the computer

chassis to dissipate any static electricity that might harm internal components.

3. Disconnect your computer and devices from their power sources. Also, discon-

nect any telephone or telecommunication lines from the computer.

Doing so reduces the potential for personal injury or shock.

In addition, take note of these safety guidelines when appropriate:

When you disconnect a cable, pull on its connector or on its strain-relief loop, not

on the cable itself. Some cables have a connector with locking tabs; if you are dis-

connecting this type of cable, press in on the locking tabs before disconnecting

the cable. As you pull connectors apart, keep them evenly aligned to avoid bend-

ing any connector pins. Also, before you connect a cable, make sure that both

connectors are correctly oriented and aligned.

Handle components and cards with care. Don’t touch the components or con-

tacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a

component such as a microprocessor chip by its edges, not by its pins.

+



Static electricity can harm delicate components inside your computer. To prevent

static damage, discharge static electricity from your body before you touch any of

your computer’s electronic components, such as the microprocessor. You can do so

by touching an unpainted metal surface on the computer chassis.

As you continue to work inside the computer, periodically touch an unpainted metal

surface to remove any static charge your body may have accumulated.

You can also take the following steps to prevent damage from electrostatic discharge

(ESD):

When unpacking a static-sensitive component from its shipping carton, do not

remove the component from the antistatic packing material until you are ready to

install the component in your computer. Just before unwrapping the antistatic

packaging, be sure to discharge static electricity from your body.

When transporting a sensitive component, first place it in an antistatic container

or packaging.

Handle all sensitive components in a static-safe area. If possible, use antistatic

floor pads and workbench pads.

The following notice may appear throughout this document to remind you of these

precautions:

xii

0<,*=



 !

 1#

 .'



For comfort and efficiency, observe the following ergonomic guidelines when you set

up and use your computer system:

Position your system so that the monitor and keyboard are directly in front of you

as you work. Special shelves are available (from Dell and other sources) to help

you correctly position your keyboard.

Set the monitor at a comfortable viewing distance (usually 510 to 610 millimeters

[20 to 24 inches] from your eyes).

Make sure that the monitor screen is at eye level or slightly lower when you sit in

front of the monitor.

Adjust the tilt of the monitor, its contrast and brightness settings, and the lighting

around you (such as overhead lights, desk lamps, and the curtains or blinds on

nearby windows) to minimize reflections and glare on the monitor screen.

Use a chair that provides good lower back support.

Keep your forearms horizontal with your wrists in a neutral, comfortable position

while you use the keyboard or mouse.

Always leave space to rest your hands while you use the keyboard or mouse.

Let your upper arms hang naturally at your sides.

Sit erect, with your feet resting on the floor and your thighs level.

When sitting, make sure the weight of your legs is on your feet and not on the

front of your chair seat. Adjust your chair’s height or use a footrest, if necessary,

to maintain proper posture.

Vary your work activities. Try to organize your work so that you do not have to

type for extended periods of time. When you stop typing, try to do things that

use both hands.

Andere Handbücher für PowerVault 530F

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge C1100 Bedienungsanleitung

Dell

Dell 5J5D0 Handbuch

Dell

Dell PowerEdge 2600 Bedienungsanleitung

Dell

Dell Olympus O-T400 Handbuch

Dell

Dell PowerEdge C4130 Bedienungsanleitung

Dell

Dell PowerEdge 2900 Bedienungsanleitung

Dell

Dell PowerEdge 2300 Bedienungsanleitung

Dell

Dell PowerEdge T605 Bedienungsanleitung

Dell

Dell DX6012S Bedienungsanleitung

Dell

Dell EMC E39S Series Handbuch

Dell

Dell PowerEdge M620 Bedienungsanleitung

Dell

Dell PowerEdge UPS 500T Bedienungsanleitung

Dell

Dell PowerEdge T320 Bedienungsanleitung

Dell

Dell XC730xd Bedienungsanleitung

Dell

Dell PowerEdge M630 Bedienungsanleitung

Dell

Dell PowerEdge R220 Kurzanleitung

Dell

Dell 8 Allgemeine Anweisungen

Dell

Dell EMC PowerEdge T440 Handbuch

Dell

Dell EMC PowerEdge R940 Montageanleitung

Dell

Dell DSS 1510 Bedienungsanleitung

Dell

Dell EMC PowerEdge R7515 Handbuch

Dell

Dell PowerVault NX3500 Bedienungsanleitung

Dell

Dell PowerEdge C5230 Bedienungsanleitung

Dell

Dell PowerEdge 6400 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch