Dell PowerEdge C8000 Bedienungsanleitung

FILE LOCATION: J:\DL\DL133448\DTP\P06HNfc4.fm

Dell PowerEdge

C8000, C8220, C8220X,

and C8000XD

Getting Started

With Your System

Mise en route de votre système

Introdução ao uso do seu sistema

Introducción al sistema

Regulatory Model: B10S, B05B, and B06B

Regulatory Type: B10S001, B05B001,

B06B001, and B06B002

FILE LOCATION: J:\DL\DL133448\DTP\P06HNfc4.fm

FILE LOCATION: J:\DL\DL133448\DTP\P06HNet4.fm

Dell PowerEdge

C8000, C8220, C8220X,

and C8000XD

Getting Started

With Your System

Regulatory Model: B10S, B05B, and B06B

Regulatory Type: B10S001, B05B001,

B06B001, and B06B002

FILE LOCATION: J:\DL\DL133448\DTP\P06HNet4.fm

Notes, Cautions, and Warnings

NOTE:

A NOTE indicates important information that helps you make better use of

your computer.

CAUTION:

A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

WARNING:

A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this publication is subject to change without notice.

Reproductionofthesematerialsinanymannerwhatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision™, OptiPlex™, Latitude™,

PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, KACE™,

FlexAddress™ and Vostro™ are trademarks of Dell Inc. Intel

, Pentium

, Xeon

, Core™, Celeron

and Xeon Phi™ are registered trademarks of Intel Corporation in the U.S. and other countries.

Microsoft

, Windows

, Windows Server

, MS-DOS

and Windows Vista

are either trademarks or

registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat

and Red Hat

Enterprise Linux

are registered trademarks of Red Hat, Inc. in the United States and/

or other countries. Novell

is a registered trademark and SUSE ™ is a trademark of Novell Inc. in

the United States and other countries. Oracle

is a registered trademark of Oracle Corporation and/

or its affiliates. Citrix

, Xen

, XenServer

and XenMotion

are either registered trademarks or

trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware

, Virtual

SMP

,vMotion

,vCenter

,andvSphere

are registered trademarks or trademarks of VMWare, Inc.

in the United States or other countries. NVIDIA and Tesla™ are trademarks and/or registered

trademarks of NVIDIA Corporation.Ubuntu is a registered trademark of Canonical Ltd.

Othertrademarksandtradenamesmaybeusedinthispublicationtorefertoeithertheentitiesclaiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Regulatory Model: B10S, B05B, and B06B

Regulatory Type: B10S001, B05B001, B06B001, and B06B002

2013 - 07 P/N P06HN Rev. A04

Template Last Updated - 2/7/2007 Getting Started With Your System

CAUTION:

Restricted Access Location

This server is intended for installation only in restricted access locations as

defined where both these conditions apply:

• Access can only be gained by service persons or by users who have been

instructed about the reasons for the restrictions applied to the location

and about any precautions that shall be taken.

• Access is through the use of a tool or lock and key, or other means of

security, and is controlled by the authority responsible for the location.

Installation and Configuration

WARNING:

Before performing the following procedure, review and follow the

safety instructions that came with the system.

The PowerEdge C8000 server enclosure is a flexible and scalable 4U

rackmount chassis. PowerEdge C8000 features ten vertically aligned sled bays

that support a full sled or a mixed sled enclosure. A full sled enclosure can

include up to five C8220X double-wide compute sleds, ten C8220 single-wide

compute sleds, or five C8000XD storage sleds. A mixed sled enclosure can

support a mixture of differing sled types.

Recommended Tools

Before you begin the installation tasks, ensure that you have the following

items:

• #1 Phillips screwdriver

• #2 Phillips screwdriver

• Wrist grounding strap connected to ground

• Antistatic mat or antistatic foam

Unpacking the System

WARNING:

Whenever you need to lift the system, get others to assist you. To

avoid injury, do not attempt to lift the system by yourself.

CAUTION:

Wear a wrist grounding strap when handling system components.

Prepare an

antistatic mat or antistatic foam

to set the PowerEdge C8000

server enclosure on.

Unpack and place your enclosure on an

antistatic mat or antistatic foam

Save the cardboard containers for future use.

Getting Started With Your System

Installing the Tool-Less Rail Solution

WARNING:

Whenever you need to lift the system, get others to assist you. To

avoid injury, do not attempt to lift the system by yourself.

WARNING:

The system is not fixed to the rack or mounted on the rails. To avoid

personal injury or damage to the system, you must adequately support the system

during installation and removal.

WARNING:

To avoid a potential electrical shock hazard, a third wire safety

grounding conductor is necessary for the rack installation. The rack equipment

must provide sufficient airflow to the system to maintain proper cooling.

CAUTION:

The rail pegs must be flush with the rack posts to install

properly.

NOTE:

The rack rails are marked LEFT and RIGHT. The rail marked "LEFT" attaches

to the left rack posts and the rail marked "RIGHT" attaches to the right rack posts

when facing the front of the rack.

Determine where to place the rails in the rack. Make sure there is enough

space in the rack for the 4U chassis. In a standard rack, the height of a 4U

chassis will span 12 rack post holes.

Use the marking indicated on the left and right sides of the rail to orient

the rail correctly to the rack posts.

Attach the left rail and stopping bracket to the rack.

Position left rail marked "

LEFT

" to align with its mounting holes on the

rack posts.

Press and hold the rail release button



to open the latch on the front

end of the left rail.

Align the three pegs



with the mounting holes on the front rack post.

Release the button



when it engages to the front rack post.

NOTE:

Make sure the rail release button is engaged correctly.

NOTE:

The rails can be used in both square-hole and round-hole racks.

Getting Started With Your System

Press and hold the rail release button



to open the latch on the back

end of the rail.

Align the three pegs



with the mounting holes on the back rack post.

Release the button



when it engages to the back rack post.

Getting Started With Your System

Install one cage nut



to the front rack post and two cage nuts



the back rack post.

Align the stopping bracket



to the back rack post and secure with the

three 10-32 screws



. Apply 35 in-lbs of torque to the screws.

Getting Started With Your System

Attach the right rail and stopping bracket to the rack.

Use the same procedure to install the right rail and stopping bracket to the

right rack posts.

NOTE:

To remove the rails, press and hold on the rail release button on the end

piece midpoint and unseat each rail.

Installing the System

This section includes the following subsections:

• Emptying the System

• Install the System Into the Rack

• Sled Bay Numbering

• Populating the System

• Install the External PDU Into the Rack

• Rack Configuration

Emptying the System

Before you install a PowerEdge C8000 server enclosure into a rack, remove all

sled modules from the enclosure to reduce system weight and avoid injury.

Place all sled modules on an antistatic mat or antistatic foam.

• To remove a

C8220 single-wide compute sled, pull up on the

release latch



and using the handle



slide the sled out of the enclosure.

Getting Started With Your System

• To remove a

C8220X double-wide compute sled, pull up on the

release

latch



and using the handle



slide the sled out of the enclosure.

• To remove a

C8000XD storage sled, pull and hold the

release tab



and

using the handle



slide the sled out of the enclosure.

Andere Handbücher für PowerEdge C8000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge M910 Kurzanleitung

Dell

Dell PowerEdge 1750 Bedienungsanleitung

Dell

Dell PowerEdge 2970 Technisches Handbuch

Dell

Dell PowerEdge 4600 Bedienungsanleitung

Dell

Dell EMC PowerEdge XE8545 Handbuch

Dell

Dell PowerEdge FC430 Bedienungsanleitung

Dell

Dell DX6004S Bedienungsanleitung

Dell

Dell PowerEdge 6850 Handbuch

Dell

Dell PowerEdge R530 Bedienungsanleitung

Dell

Dell PowerEdge R530 Bedienungsanleitung

Dell

Dell PowerEdge 6600 Bedienungsanleitung

Dell

Dell PowerEdge 6600 Bedienungsanleitung

Dell

Dell PowerEdge R630 Bedienungsanleitung

Dell

Dell DL4300 Bedienungsanleitung

Dell

Dell PowerEdge C6220 Handbuch

Dell

Dell PowerEdge FX2 Kurzanleitung

Dell

Dell PE R720XD Bedienungsanleitung

Dell

Dell 6100 Bedienungsanleitung

Dell

Dell PowerEdge 6350 Bedienungsanleitung

Dell

Dell PowerEdge 6850 Stücklistenhandbuch

Dell

Dell PowerEdge XR5610 Handbuch

Dell

Dell HHB006 Handbuch

Dell

Dell External OEMR R910 Kurzanleitung

Dell

Dell PowerEdge 6850 Technisches Handbuch

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch