Dell Poweredge VRTX Bedienungsanleitung

Dell PowerEdge VRTX

Getting Started Guide

Regulatory Model: E22S and HHB

Regulatory Type: E22S001 and HHB Series

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Trademarks used in this text: Dell™, the Dell logo, Dell Boomi™, Dell Precision™, OptiPlex™, Latitude™, PowerEdge™, PowerVault™,

PowerConnect™, OpenManage™, EqualLogic™, Compellent™, KACE™, FlexAddress™, Force10™and Vostro™are trademarks of Dell

Inc. Intel®, Pentium®, Xeon®, Core®and Celeron®are registered trademarks of Intel Corporation in the U.S. and other countries. AMD®

is a registered trademark and AMD Opteron™, AMD Phenom™and AMD Sempron™are trademarks of Advanced Micro Devices, Inc.

Microsoft®, Windows®, Windows Server®, Internet Explorer®, MS-DOS®, Windows Vista®and Active Directory®are either trademarks

or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat®and Red Hat®

Enterprise Linux®are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell®and SUSE®are

registered trademarks of Novell Inc. in the United States and other countries. Oracle®is a registered trademark of Oracle Corporation

and/or its affiliates. Citrix®, Xen®, XenServer®and XenMotion®are either registered trademarks or trademarks of Citrix Systems, Inc. in

the United States and/or other countries. VMware®, Virtual SMP®, vMotion®, vCenter®and vSphere®are registered trademarks or

trademarks of VMware, Inc. in the United States or other countries. IBM®is a registered trademark of International Business Machines

Corporation.

2013 - 04

Rev. A00

Installation And Configuration

WARNING: Before performing the following procedure, review the safety instructions that came with the server

module or enclosure.

Unpacking The System

WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the

system by yourself.

Unpack the enclosure and the server module(s) and identify each item.

Locating The System Electrical Rating Label

Before setting up the system, make sure you read the electrical rating information for the system provided on the

information tag. The information tag also contains the worldwide regulatory agency marks for the system.

Figure 1. Locating the Electrical Rating Label

Stabilizing The Tower System

The tower system has four feet on its bottom panel that can be extended outward to help properly stabilize the system.

You can also replace the system feet with the optional wheels. For more information on installing the wheels, see the

Dell PowerEdge VRTX Owner's Manual

at dell.com/poweredgemanuals.

WARNING: Failure to extend the system feet outward poses the risk of having the system tip over, possibly causing

bodily injury or damage to the system.

CAUTION: Rolling the system on its wheels can cause vibrations that can damage the system.

Figure 2. Extending the Feet of the Tower System

Optional—Rack Configuration

If you are using the optional rack configuration, assemble the rails and install the system in the rack following the safety

instructions and the rack installation instructions provided with your system.

NOTE: For more information on converting the system to rack mode, see the

Dell PowerEdge VRTX Owner's

Manual

at dell.com/poweredgemanuals.

Installing A Server Module

CAUTION: Install a blank in all empty server slots to maintain proper thermal conditions.

NOTE: The enclosure only supports Dell PowerEdge M520 and M620 server modules that are specifically

configured for the enclosure, and can be identified by a label marked PCIe on the server module. If you install

PowerEdge M520 and M620 server modules that are not configured for the enclosure, an error message is

displayed. For more information on configuring a server module for the enclosure, see the

Dell PowerEdge VRTX

Owner's Manual

at dell.com/poweredgemanuals.

Figure 3. Installing a Server Module

Beginning with slot 1, slide the server modules into the enclosure. When a server module is securely installed, its handle

returns to the closed position.

Connecting The CMC Module

Figure 4. Connecting the CMC Module

Connect the serial cable (optional) and network cable(s) from the management system to the CMC module. If a second

optional CMC module is installed, connect its network port as well.

NOTE: If the second CMC module (optional) is not installed, connect the network cable to CMC port 1 on the

enclosure.

NOTE: The serial port connects to the active CMC module.

Connecting The I/O Module

Figure 5. Connecting the I/O Module

Connect the network cable to the I/O module to provide network connection to the server.

NOTE: If you have a pass-through module installed in the enclosure, each server module requires its own network

cable.

NOTE: For information on configuring the network settings for the I/O module, see the

Dell PowerEdge VRTX CMC

User's Guide

at dell.com/esmmanuals.

Connecting The Optional Keyboard, Mouse, And Monitor

Figure 6. Connecting Keyboard, Mouse, And Monitor

Connect the keyboard, mouse, and monitor.

The connectors on the front of your system have icons indicating which cable to plug into each connector. Be sure to

tighten the screws (if any) on the monitor's cable connector.

NOTE: Connecting the keyboard, mouse, and monitor is optional. You can use the LCD menu options to map a

server module to the KVM. You can also access the KVM remotely using the iDRAC interface. For more information,

see the iDRAC User's Guide at dell.com/esmmanuals.

Connecting The System To Power

Figure 7. Connecting The System To Power

Connect the power cables to the system power supplies.

NOTE: The power supply units must have the same maximum output power.

Securing The Power Cable

Figure 8. Securing The Power Cable

Bend the system power cable, as shown in the illustration, and attach to the cable strap.

Plug the other end of the power cable into a grounded electrical outlet or a separate power source, such as an

uninterruptible power supply (UPS) or a power distribution unit (PDU).

Turning On The Enclosure

Figure 9. Turning On The Enclosure

Press the power button on the enclosure. The power indicator should light.

NOTE: The CMC may take a few minutes to initialize after you turn on the enclosure.

the virtual adapters and PCIe slots to the server slots. For more information, see the

Dell PowerEdge VRTX CMC User's

Guide

at dell.com/esmmanuals.

Turning On Server Modules

Figure 10. Turning on a Server Module

Press the power button on each server module, or power on the modules using the systems management software.

NOTE: The server modules do not power on until the CMC is properly configured and has fully initialized. It may

take an additional two minutes for the server iDRAC to initialize after the chassis is fully powered on.

Installing The Optional Bezel

Figure 11. Installing the Optional Bezel

Install the bezel (optional).

Complete The Operating System Setup

If you purchased a preinstalled operating system, see the documentation associated with the operating system. To

install an operating system for the first time, see the installation and configuration documentation for your operating

system. Be sure the operating system is installed before installing hardware or software not purchased with the system.

NOTE: See dell.com/support for the latest information on supported operating systems.

Dell Software License Agreement

Before using your system, read the Dell Software License Agreement that came with your system. You must consider

any media of Dell-installed software as BACKUP copies of the software installed on your system’s hard drive. If you do

not accept the terms of the agreement, call the customer assistance telephone number. For customers in the United

States, call 800-WWW-DELL (800-999-3355). For customers outside the United States, visit dell.com/support and select

your country or region from the bottom of the page.

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be

included within this document or as a separate document.

• The

Dell PowerEdge VRTX Owner’s Manual

provides information about system features and describes how to

troubleshoot the system and install or replace system components. This document is available online at

dell.com/poweredgemanuals.

• The

Dell PowerEdge VRTX CMC User's Guide

provides information on installing, configuring and using the

Chassis Management Controller (CMC). This document is available online at dell.com/esmmanuals.

• The

Integrated Dell Remote Access Controller (iDRAC) User’s Guide

provides information about installation,

configuration and maintenance of the iDRAC on managed systems. This document is available online at

dell.com/esmmanuals.

• The rack documentation included with your rack solution describes how to install your system into a rack, if

required.

• Any media that ships with your system that provides documentation and tools for configuring and managing your

system, including those pertaining to the operating system, system management software, system updates, and

system components that you purchased with your system.

NOTE: Always check for updates on dell.com/support/manuals and read the updates first because they often

supersede information in other documents.

NOTE: When upgrading your system, it is recommended that you download and install the latest BIOS, drivers, and

systems management firmware on your system from dell.com/support.

NOM Information

The following information is provided on the device described in this document in compliance with the requirements of

the official Mexican standards (NOM):

Importer: Dell Inc. de México, S.A. de C.V.

Paseo de la Reforma 2620 -11º Piso

Col. Lomas Altas

11950 México, D.F.

Model number: E22S

Supply voltage: 100 V CA to 240 V CA

Frequency: 50 Hz/60 Hz

Current consumption: 12 A to 6.5 A (x4)

Model number: HHB

Supply voltage: 12 V CC

Current consumption: 37 A

Technical Specifications

Power

AC power supply (per power supply unit)

Wattage 1100 W

Connector IEC C14

Heat dissipation

NOTE: Heat dissipation is calculated using the

power supply wattage rating.

4100 BTU/hr maximum

System Voltage Requirements

NOTE: This system is also designed to be connected to

IT power systems with a phase to phase voltage not

exceeding 230 V.

100–240 VAC, autoranging, 50/60 Hz

Battery 3 V CR2032 Lithium coin cell

Physical — Server Modules

PowerEdge M620

Height 19.23 cm (7.57 inch)

Width 5.03 cm (1.98 inch)

Depth 54.43 cm (21.43 inch) with handle closed

56.49 cm (22.24 inch) with handle open

Weight (maximum) 7.0 kg (15.42 lb)

PowerEdge M520

Height 19.23 cm (7.57 inch)

Width 5.03 cm (1.98 inch)

Depth 54.43 cm (21.43 inch) with handle closed

56.49 cm (22.24 inch) with handle open

Weight (maximum) 5.50 kg (12.11 lb)

NOTE: For additional specifications, see the server module's

Owner's Manual

at dell.com/poweredgemanuals.

Andere Handbücher für poweredge VRTX

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge R210 Bedienungsanleitung

Dell

Dell DX6012S Bedienungsanleitung

Dell

Dell PowerEdge 300 Referenzhandbuch

Dell

Dell PowerEdge C5220 Bedienungsanleitung

Dell

Dell PowerEdge UPS 500T Bedienungsanleitung

Dell

Dell PowerEdge 2800 Handbuch

Dell

Dell E60S Handbuch

Dell

Dell PowerEdge R730xd Bedienungsanleitung

Dell

Dell VMware ESX Server 3i Bedienungsanleitung

Dell

Dell PowerEdge 6950 Bedienungsanleitung

Dell

Dell PowerEdge 1950 Technisches Handbuch

Dell

Dell PowerEdge 4600 Bedienungsanleitung

Dell

Dell PowerEdge C6220 II Bedienungsanleitung

Dell

Dell EMC VxFlex Ready Node Benutzerhandbuch

Dell

Dell Olympus O-T400 Handbuch

Dell

Dell External OEMR R810 Kurzanleitung

Dell

Dell DX6000 Bedienungsanleitung

Dell

Dell PowerEdge 4200 Series Leitfaden

Dell

Dell PowerEdge SC1435 Bedienungsanleitung

Dell

Dell POWEREDGE R710 Bedienungsanleitung

Dell

Dell P72S Bedienungsanleitung

Dell

Dell PowerEdge C5230 Bedienungsanleitung

Dell

Dell PowerEdge C8000 Bedienungsanleitung

Dell

Dell PowerEdge R610 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch

Dell poweredge VRTX Bedienungsanleitung

Beliebte Server Handbücher anderer Marken