Dell Wyse 1010 Zero Bedienungsanleitung

Dell Wyse 1010 Zero Client

User’s Guide

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you

how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

property laws. Dell and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other

marks and names mentioned herein may be trademarks of their respective companies.

2016 - 04

Rev. A00

Contents

1 Setting Up Your Zero Client................................................................................4

2 Important Information.........................................................................................6

3 Safety Guidelines...................................................................................................7

Setting Up Your Zero Client

Make sure that you have read Safety Guidelines before setting up and operating this product. Refer to the

figures and proceed as follows:

1. Install Windows MultiPoint Server on the Server:

Install according to the Microsoft installation documentation at

www.microsoft.com/windows/mulitpoint/default.aspx

2. Important:

Wyse 1010 zero clients can be installed on Microsoft Windows MultiPoint Server 2012 (Standard or

Premium). For more information, locate your product and download the Fact Sheet using the Cloud

clients tab at www.dellwyse.com/products

3. Update to the Latest Audio, Ethernet, and Video Drivers on the Server:

Update according to the Microsoft installation documentation.

CAUTION: After install ing MultiPoint Server and updating the drivers, ensure that all devices

(includ ing all graphics cards) are properly recognized by the server; otherwise, MultiPoint

Server will not recognize Wyse E class clients.

4. Install the E Class Zero Client Driver on the Server:

Wyse E class driver software can be found at dellwyse.com/downloads

5. Connect the Wyse Zero Client to the Server:

Place the zero client on a desk; or use the desktop stand/bracket for VESA mounting (assemble with

provided screws). Connect according to your network architecture as defined by your network

administrator/consultant. For example, Connect one end of the provided Ethernet cable to the zero

client Network port, and then connect the other end of the Ethernet cable to an Ethernet switch that

is connected to the server.

NOTE: Position 1010 to within 300 feet of the Ethernet switch.

CAUTION: You cannot mix Wyse 1010 with 7030 zero clients. They all need to be either USB-

connected zero clients or Ethernet connected zero clients

6. Attach Peripherals to the Wyse Zero Cl ient:

Attach all peripherals of each user station such as monitor, keyboard, mouse, printer, and audio

devices to the respective ports. VGA video port, USB 2.0 ports, microphone in, and audio out

connections on the zero client are available.

WARNING:

7. Connect the Wyse Zero Client Power Cable and Adapter:

Connect the AC power cable to the zero client power cable input, and then connect the 5V DC

power adapter to a 100-240V AC, 50- 60 Hz electrical outlet.

NOTE: After connection, it takes a few minutes for the MultiPoint Manager to launch on the

server. If no launch occurs, go to Start > All Programs, and click MultiPoint Manager window.

8. Configure the Zero Client on Windows MultiPoint Server:

Complete the additional MultiPoint Server configurations and customizations that you want

according to the Microsoft deployment documentation and the online Help located on the

MultiPoint Manager window.

Important Information

Dell Support: For the self-service portal, knowledge base, software downloads, registration, warranty

extensions/RMAs, reference manuals, and so on, see dellwyse.com/support

Dell and the Environment: Information about Dell compliance with RoHS and with the Waste Electrical

and Electronic Equipment (WEEE) is available at, www.dell.com/environment

Dell and E-Recycling: Information about recycling of Dell product is available at, www.dell.com/recycling

Dell Warranty: The standard warranty is three years from the date of purchase.

Safety Guidelines

Improper connection, mounting, or use of this product could result in component failure or undesired

interference. Read the following guidelines before setting up and operating the device.

1. Setup:

• Do not force a connector into its socket. If any undue resistance is encountered, ensure that the

connector is correctly oriented to the receptacle.

• The main unit is not user serviceable; opening or accessing the case may violate your warranty.

2. Care:

• To clean your device, first disconnect it from the electrical outlet, and then use a soft cloth

dampened with water for cleaning. Do not use liquid or aerosol cleaners.

3. Power Sources:

• For regulatory compliance use only the power adapter that comes with your device or a Dell-

approved equivalent. For proper replacement compare the labels on both device and power

adapter to ensure that their voltages match.

WARNING: Use of any other power adapter may damage your device or the power

adapter. The damage caused by an improper power adapter is not covered by warranty.

• To turn off your device, disconnect the AC power adapter or shut off power at a circuit breaker

(including power strips).

• Surge protectors for electrical devices are recommended in areas of lightning. However, when

lightning is occurring, your equipment should be properly shut down and unplugged from AC

power until the storm has passed.

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge 6950 Bedienungsanleitung

Dell

Dell PowerEdge SC430 Betriebsanleitung

Dell

Dell Precision Workstation 350 Technisches Handbuch

Dell

Dell PowerEdge 2900 Technisches Handbuch

Dell

Dell PowerEdge C8000XD Bedienungsanleitung

Dell

Dell PowerEdge 6600 Bedienungs- und Wartungshandbuch

Dell

Dell DR4000 Restore Manager Bedienungsanleitung

Dell

Dell PowerEdge T30 Bedienungsanleitung

Dell

Dell PowerEdge 2950 Technisches Handbuch

Dell

Dell PowerEdge FC640 Handbuch

Dell

Dell PowerVault NX3000 Bedienungsanleitung

Dell

Dell PowerEdge 2970 Bedienungsanleitung

Dell

Dell 3250 Bedienungsanleitung

Dell

Dell PS4100 Montageanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell PowerEdge R805 System Bedienungsanleitung

Dell

Dell PowerEdge MX760c Handbuch

Dell

Dell PowerEdge 7150 Bedienungsanleitung

Dell

Dell External OEMR T710 Bedienungsanleitung

Dell

Dell PowerEdge R860 Handbuch

Dell

Dell PowerEdge R415 Bedienungsanleitung

Dell

Dell PowerEdge 4600 Bedienungsanleitung

Dell

Dell PowerEdge R730 Bedienungsanleitung

Dell

Dell 8 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch