Delta 29FWC-100E Bedienungsanleitung

www.delta-dct.com

Wired Controller 29FWC-100E

INSTRUCTION MANUAL

WARNING!

Read and follow all safety precautions in

Instruction Manual - improper use can cause

serious injury.

User Notice

Please carefully read this manual before installation and use of this product

◆Thanks for choosing DELTA duct type air conditioners. Please read this manual carefully

before operating this product and keep it properly for future reference. In addition, please

take notice of the symbols below.

WARNING! This mark indicates procedures which, if improperly performed, might lead to

the death or serious injury of the user.

CAUTION! This mark indicates procedures which, if improperly performed, might possibly

result in personal harm to the user, or damage to property.

CAUTION!

(1). Do not install the wired controller in the damp place or under direct sunlight.

(2). Do not beat, toss, or frequently assemble/disassemble the wired controller.

(3). Do not operate the wired controller with wed hands and never let any liquid ow into it.

(4). Do not install or remove the wired controller by yourself. If necessary, please contact the after-

sales serviceman.

(5). This wired controller is applicable to various kinds of air conditioners, while some specic functions

unavailable to the duct type air conditioners will not be covered in this manual.

(6). Before operating the air conditioner, please read this manual carefully and keep it properly for

future reference.

1 Introduction to the Wired Controller................................................................. 1

1.1 Appearance and LCD Icons ....................................................................... 1

1.2 Introduction to the LCD Icons..................................................................... 2

2 Press Buttons .................................................................................................. 4

2.1 Buttons ....................................................................................................... 4

2.2 Instruction to the Function of Press Buttons............................................... 4

3 OPERATION INSTRUCTION ......................................................................... 5

3.1 On/off.......................................................................................................... 5

3.2 Mode Setting .............................................................................................. 5

3.3 Temperature Setting ................................................................................... 6

3.4 Fan Speed Setting...................................................................................... 6

3.5 Right and Left Swing .................................................................................. 7

3.6 Up and Down Swing................................................................................... 8

3.7 Timer Setting .............................................................................................. 8

3.8 Air Exchange Setting .................................................................................. 9

3.9 Sleep Setting ............................................................................................ 11

3.10 Health Setting........................................................................................ 13

3.11 I-Demand Setting.................................................................................... 13

3.12 Vacation Setting..................................................................................... 14

3.13 Turbo Function Setting ........................................................................... 15

3.14 SAVE Function Setting ........................................................................... 16

Contents

3.15 E-HEATER Setting .................................................................................18

3.16 Blow Function Setting.............................................................................18

3.17 Filter Setting ...........................................................................................19

3.18 Quiet Function Setting .......................................................................21

3.19 Ultra-Dry Setting ....................................................................................22

3.20 Other Functions......................................................................................22

4 Installation of the Wired Controller ...............................................................24

4.1 Standard Parts .........................................................................................24

4.2 Installation Location and Installation Requirements ................................25

4.3 How to Install the Wired Controller...........................................................25

4.4 How to Remove the Wired Controller.......................................................26

5 Error Display.................................................................................................26

1 Introduction to the Wired Controller

Fig.1 Appearance of the Wired Controller

1.1 Appearance and LCD Icons

Fig.2 Appearance of the LCD

1.2 Introduction to the LCD Icons

Table 1

No. Icons Introduction

1 Left and right swing function

2 Up and down swing function

3 Air exchange function

4 Sleep function

5Auto mode

6 COOL mode

7 DRY mode

8 FAN mode

9 HEAT mode

10 Health function

11 I-Demand function

12 Vacation function

13 Status display of master and slave wired controller

Shield function

The button operation, temperature setting, "On/Off" operation, "Mode"

setting, and "Save" setting are disabled.

15 Fan speed

16 Memory function

The unit will resume the original setting state after power recovery.

17 Turbo function

18 Energy-saving function

19 Ambient/setting temperature

20 Electric heater

21 Blow function

22 Defrosting function

23 Filter cleaning

24 Timer Setting

25 Keycard control / Detected status sensed by human body

26 Quiet function

27 Lock function

2 Press Buttons

2.1 Buttons

Fig.3 Press Buttons

2.2 Instruction to the Function of Press Buttons

Table 2

No. Press Buttons Function Introduction

1 Enter/Cancel ①.

Function selection and canceling;

②.

Press it for 5s to enquiry the outdoor and indoor ambient temperature.

2▲

①.

Running temperature setting of indoor unit, range :16~30°C

②.

Timer setting, range:0.5-24hr

③.

Air function setting

④.

Save setting

⑤.

Clean setting

6▼

3 Fan Select fan speed from high, mid-high, middle, mid-low, low and auto

levels.

4 Mode Selection of the COOL, HEAT, FAN or DRY mode.

5 Function Switchover among these functions of SWING/AIR/SLEEP/HEALTH/

I-DEMAND/VACATION/TURBO/SAVE/E-HEATER/BLOW/QUIET

7 Timer Timer setting

8 On/Off Turn on/off indoor unit

4 mode

and 2 ▲ Memory

Press Mode and ▲ at the same time for 5s under the OFF state of the

unit to activate/deactivate memory function (If memory is set, indoor unit

will resume original setting state after power recovery. If not, indoor unit is

defaulted to be OFF after power recovery. Memory function is defaulted to

be ON)

2 ▲

and 6 ▼ Lock

Under the ON state of the unit without any malfunction or under the OFF

state of the unit, press ▲and ▼ buttons at the same time for 5s to go to

the lock state. In this case, any other buttons won’t respond the press.

Repress ▲ and ▼ again for 5s to quit the lock state.

4 mode

and 6 ▼ °F/°C Under the OFF state of the unit, press the Mode and ▼ at the same time

for 5s to switch the temperature scale between Celsius and Fahrenheit.

3 OPERATION INSTRUCTION

3.1 On/off

Press the On/Off button to turn on or off the unit.

Notes:

①.

The state shown in Fig.4 indicates the OFF state of the unit after energization.

②.

The state shown in Fig.5 indicates the ON state of the unit after energization.

Fig.4 OFF State of the Unit Fig.5 ON State of the Unit

3.2 Mode Setting

Under the ON state of the unit, press the Mode button to switch the operation modes as the

sequence shown in Fig.6:

Auto Cooling Dry Fan Heating

Fig.6

3.3 Temperature Setting

Press ▲ or ▼button to increase or decrease setting temperature under on-state of the unit. If

press either of them continuously, temperature will be increased or decreased by 1°C every 0.5s.

In Cooling, Dry, Fan and Heating mode, temperature setting range is 16°C~30°C.

In Auto mode, the setting temperature is un-adjustable.

As shown in Fig.7:

Fig.7 Temperature Setting

3.4 Fan Speed Setting

Press Fan button, fan speed of indoor unit will change as the sequence shown in Fig.8:

Low Mid-low Mid-highMiddle High Super-high Auto

Fig.8 Fan Speed Setting

Inhaltsverzeichnis

Andere Delta Controller Handbücher

Delta

Delta ASC2204C-H Bedienungsanleitung

Delta

Delta ASD-B2-0121-B Bedienungsanleitung

Delta

Delta AH Motion Series Bedienungsanleitung

Delta

Delta DAC-606 Bedienungsanleitung

Delta

Delta DVP-EH Series Bedienungsanleitung

Delta

Delta DZNT-104T Bedienungsanleitung

Delta

Delta DVP14ES00R2 Bedienungsanleitung

Delta

Delta DVP-ES2 Bedienungsanleitung

Delta

Delta VFD-E Bedienungsanleitung

Delta

Delta RTU-ECAT Bedienungsanleitung

Delta

Delta DVP-EH Bedienungsanleitung

Delta

Delta eZV-440 Benutzerhandbuch

Delta

Delta NC10EB Bedienungsanleitung

Delta

Delta ASDA-A2 Series Bedienungsanleitung

Delta

Delta DVP-EH3 Bedienungsanleitung

Delta

Delta UNOac A8 Bedienungsanleitung

Delta

Delta VFD-L Series Bedienungsanleitung

Delta

Delta DVP-SX2 Bedienungsanleitung

Delta

Delta 5CN-220T Series Bedienungsanleitung

Delta

Delta RMC200 Benutzerhandbuch

Delta

Delta DVP08SM11N Bedienungsanleitung

Delta

Delta DVP-15MC Series Bedienungsanleitung

Delta

Delta AS Series Bedienungsanleitung

Delta

Delta RMC70 Benutzerhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch