Delta VFD-V Series Bedienungsanleitung

V E 0 5

5011608405

2016-04

VFD-V Series

Preface

Thank you for choosing DELTA’s high-performance VFD-V Series. VFD-V Series

are manufactured by adopting high-quality components, material and incorporating the

latest microprocessor technology available.

 Getting Started

This manual will be helpful in the installation, parameter setting, troubleshooting, and daily

maintenance of the AC motor drives. To guarantee safe operation of the equipment, read

the following safety guidelines before connecting power to the AC drives. Keep this

operating manual handy and distribute to all users for reference.

! WARNING

!Always read this manual thoroughly before using VFD-V series AC Motor Drives.

!DANGER! AC input power must be disconnected before any maintenance. Do not

connect or disconnect wires and connectors while power is applied to the circuit.

Maintenance must be performed by qualified technicians.

!CAUTION! There are highly sensitive MOS components on the printed circuit boards.

These components are especially sensitive to static electricity. To avoid damage to

these components, do not touch these components or the circuit boards with metal

objects or your bare hands.

!DANGER! A charge may still remain in the DC-link capacitor with hazardous voltages

even if the power has been turned off. To avoid personal injury, please ensure that

power has turned off before operating AC drive and wait ten minutes for capacitors to

discharge to safe voltage levels.

!CAUTION! Ground the VFD-V using the ground terminal. The grounding method must

comply with the laws of the country where the AC drive is to be installed. Refer to Basic

Wiring Diagram.

!DANGER! The AC drive may be destroyed beyond repair if incorrect cables are

connected to the input/output terminals. Never connect the AC drive output terminals

U/T1, V/T2, and W/T3 directly to the AC main circuit power supply.

!CAUTION! The final enclosures of the AC drive must comply with EN50178. (Live parts

shall be arranged in enclosures or located behind barriers that meet at least the

requirements of the Protective Type IP20. The top surface of the enclosures or barrier

that is easily accessible shall meet at least the requirements of the Protective Type

IP40). (VFD-V series corresponds with this regulation.)

CAUTION! Heat sink may heat up over 70oC (158oF), during the operation. Do not

touch the heat sink.

VFD-V Series

CHAPTER 1 RECEIVING AND INSPECTION

1.1 Nameplate Information ...........................................................................................1 - 1

1.2 Model Explanation..................................................................................................1 - 1

1.3 Serial Number Explanation.....................................................................................1 - 2

CHAPTER 2 STORAGE AND INSTALLATION

2.1 Storage...................................................................................................................2 -1

2.2 Installation ..............................................................................................................2 -2

CHAPTER 3 WIRING

3.1 Basic Wiring Diagram .............................................................................................3 - 2

3.2 External Wiring .......................................................................................................3 - 5

3.3 Main Circuit Terminal Explanations.........................................................................3 - 6

3.4 Control Terminal Explanations................................................................................3 - 6

3.5 Component Explanations .......................................................................................3 - 8

3.6 Wiring Notice ..........................................................................................................3 - 1 4

CHAPTER 4 DIGITAL KEYPAD (VFD-PU05) OPERATION

4.1 Description of the Digital Keypad VFD-PU05 .........................................................4 - 1

4.2 Explanations of Display Messages.........................................................................4 - 1

4.3 Operation steps of the Digital Keypad VFD-PU05 ..................................................4 - 3

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS

5.1 Group 0: System Parameter...................................................................................5 - 1

5.2 Group 1: Basic Parameter ......................................................................................5 - 1 3

5.3 Group 2: Digital Output/Input Parameter ................................................................5 - 1 8

5.4 Group 3: Analog Output/Input Parameter ...............................................................5 - 2 7

5.5 Group 4: Multi-Step Speed and Procedural Operation Parameter..........................5 - 3 5

VFD-V Series

5.6 Group 5: Motor Modulation Parameter ...................................................................5 - 4 0

5.7 Group 6: Protection Parameter...............................................................................5 - 4 5

5.8 Group 7: Special Parameter ...................................................................................5 - 5 2

5.9 Group 8: High-Performance Parameter..................................................................5 - 5 8

5.10 Group 9: Communication Parameter....................................................................5 - 6 2

5.11 Group 10: Speed Feedback Parameter ................................................................5 - 7 3

CHAPTER 6 MAINTENANCE AND INSPECTIONS.......................................................6 - 1

CHAPTER 7 TROUBLESHOOTING...............................................................................7 - 1

CHAPTER 8 PARAMETER SUMMARY.........................................................................8 - 1

APPENDIX A SPECIFICATIONS ...................................................................................A - 1

APPENDIX B ACCESSORIES .......................................................................................B - 1

B.1 Fuse Specification Chart ........................................................................................B - 1

B.2 Braking Resistors...................................................................................................B - 3

B.3 AMD - EMI Filter Cross Reference.........................................................................B - 7

B.4 PG Card .................................................................................................................B - 1 3

B.5 Zero Phase Reactor...............................................................................................B - 17

APPENDIX C DIMENSIONS...........................................................................................C - 1

APPENDIX D EC DECLARATION OF CONFORMITY ..................................................D - 1

VFD-V Series

CHAPTER 1 RECEIVING AND INSPECTION

This VFD-V AC drive has gone through rigorous quality control tests at the factory before

shipment. After receiving the AC drive, please check for the following:

Receiving

Check to make sure that the package includes an AC drive, the User Manual, dust

covers and rubber bushings.

Inspect the unit to insure it was not damaged during shipment.

Make sure that the part number indicated on the nameplate corresponds with the part number

of your order.

1.1 Nameplate Information →Example for 5HP/3.7kW 230V 3-Phase

037V23A0T00010123

DELTAELECTRONICS,INC.

MODEL: VFD037V23A-2

3PH 200-240V 50/60Hz 21.2A

INPUT: 3PH 0-240V 17A 6.5KVA 5HP

0-600Hz

XX.XX

國際認證標示區；

Certifications

序號；

ialnumbe

機種名稱；

Model name

輸入端電壓/電流範圍；

Inputvoltage/current

輸出端電壓/電流範圍；

Outputvoltage/current

頻率範圍；

Frequencyr ange

韌體版本；

Firmware version

生產識別；

生产识别；

Productidentification

FREQUENCYRANGE:

1.2 Model Explanation

VFD 037 V 23 A

Version Type

Input Voltage

23:230V 3-PH ASE

43:460V 3-PH ASE

VFD-V Series

Series Name

Applicable Motor Capacity

007:1HP(0.75kW) 015:2HP(1.5kW)

022:3HP(2.2kW) 037:5HP(3.7kW)

055:7.5HP(5.5kW) 075:10HP(7.5kW)

110:15HP(11kW) 150:20HP(15kW)

185:25HP(18.5kW) 220:30HP(22kW)

300:40HP(30kW) 370:50HP(37kW)

450:60HP(45kW) 550:75HP(55kW)

750:100HP(75kW)

VFD-V Series

1-2

1.3 Serial Number Explanation

●Please contact the dealers immediately should any discrepancy occurred.

037V23A0T 0 10 9999

Production Number

Production Week

Production Year

Production Model

30V 3-PHASE 5HP(3.7kW)

Production Factory

VFD-V Series

CHAPTER 2 STORAGE AND INSTALLATION

2.1 Storage

The AC drive should be kept in the shipping carton before installation. In order to retain the

warranty coverage, the AC drive should be stored properly when it is not to be used for an

extended period of time.

Ambient Conditions:

Operation Air Temperature: -10oC to +40oC (14oF to 104oF)

+50oC (122oF) without dust cover.

Atmosphere pressure: 86 to 106 kPa

Installation Site Altitude: below 1000m

Vibration: Maximum 9.80 m/s2(1G) at less than 20Hz

Maximum 5.88 m/s2(0.6G) at 20Hz to 50Hz

Storage Temperature: -20oC to +65oC (-4oF to 149oF)

Relative Humidity: Less than 90%, no condensation allowed

Atmosphere pressure: 86 to 106 kPa

Transportation Temperature: -20oC to +60oC (-4oF to 140oF)

Relative Humidity: Less than 90%, no condensation allowed

Atmosphere pressure: 86 to 106 kPa

Vibration: Maximum 9.80 m/s2(1G) at less than 20Hz, Maximum 5.88

m/s2(0.6G) at 20Hz to 50Hz

Pollution Degree 2: good for a factory type environment.

Inhaltsverzeichnis

Andere Delta Controller Handbücher

Delta

Delta DTD Series Bedienungsanleitung

Delta

Delta DVP-10PM Bedienungsanleitung

Delta

Delta VFD-007B Bedienungsanleitung

Delta

Delta DVP08SM11N Bedienungsanleitung

Delta

Delta RTU-ECAT Bedienungsanleitung

Delta

Delta ASC2204C-H Bedienungsanleitung

Delta

Delta DVP-SX2 Bedienungsanleitung

Delta

Delta 2SP2 Bedienungsanleitung

Delta

Delta DVP-SS2 Bedienungsanleitung

Delta

Delta DVP08SM11N Bedienungsanleitung

Delta

Delta DVP-EH3 Bedienungsanleitung

Delta

Delta NC10EB Bedienungsanleitung

Delta

Delta DVP-SA2 Bedienungsanleitung

Delta

Delta AH05PM-5A Bedienungsanleitung

Delta

Delta 2SPA Bedienungsanleitung

Delta

Delta VFD-L Series Bedienungsanleitung

Delta

Delta DCS Bedienungsanleitung

Delta

Delta NC EM Series Bedienungsanleitung

Delta

Delta VFD7A5MS23ANSHA Bedienungsanleitung

Delta

Delta AX Series Bedienungsanleitung

Delta

Delta VFD-L Bedienungsanleitung

Delta

Delta AH Series Bedienungsanleitung

Delta

Delta AH Series Bedienungsanleitung

Delta

Delta DAC-633 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch