Delta PMT Series Bedienungsanleitung

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

PMT

Highlights & Features

•Universal AC input range

•Power will not de-rate from input voltage 100 Vac to 264 Vac

•High MTBF > 700,000 hrs. per Telcordia SR-332

•Short Circuit / Overvoltage / Overload / Over Temperature

Protections

•Versatile connector options (Terminal Block, Front Face)

Safety Standards

CB Certified for worldwide use

Model Number: PMT-5V50W1A☐

Unit Weight:0.23 kg (0.51 lb)

Dimensions (L x W x H): 98 x 98 x 38 mm

(3.86 x 3.86 x 1.50 inch)

General Description

The new PMT series of panel mount power supplies is the latest offering from one of the world’s largest power supply manufacturers and

solution providers – Delta. The PMT products also offer a nominal output voltage of 5 V with a wide operating temperature range from -

10°C to +70°C and can withstand shock and vibration requirements (in accordance to IEC 60068-2-27 and IEC 60068-2-6 respectively).

In addition to features like overvoltage and overload protections, Delta’s PMT series of panel mount power supplies is unlike many other

brands in the same price level. The PMT series is designed for cost competitive markets without compromising the quality of the

components and product specifications. The series of products has an expected life time of 10 years and this versatile product has two

different connector options (Terminal Block and Front Face) and can also be converted into L Frame (PML) type of power supplies to

satisfy different application needs.

Model Information

PMT Panel Mount Power Supply

Model Number

Input Voltage Range

Rated Output

oltage

Rated Output Current

PMT-5V50W1A☐85-264 Vac 5 Vdc 10.0 A

Model Numbering

–

50W



Panel Mount Product Type

T – Enclosed

L – L Frame*

Output Voltage Output Power Single Phase No PFC Connector Type

A – Terminal Block

G – Front Face*

*Options

**For Terminal Block

A G

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240 Vac

Input Voltage Range 85-264 Vac

Nominal Input Frequency 50-60 Hz

Input Frequency Range 47-63 Hz

Input Current < 1.10 A @ 115 Vac, < 0.65 A @ 230 Vac

Efficiency at 100% Load 82.0% typ. @ 230 Vac

Max Inrush Current (Cold Start) 45 A typ. @ 230 Vac

Leakage Current < 1 mA @ 240 Vac

Output Ratings / Characteristics

Nominal Output Voltage 5 Vdc

Output Voltage Tolerance ± 1% (initial set point tolerance from factory)

Output Voltage Adjustment Range 4.50-5.50 Vdc

Output Current 10.0 A

Output Power 50 W

Line Regulation < 0.5% typ. (@ 115 Vac & 230 Vac input, 100% input)

Load Regulation < 1% typ. (@ 115 Vac & 230 Vac input, 0-100% input)

PARD (20MHz) < 80 mVpp @ 25°C to 50°C,

< 160 mVpp @ -10°C to 0°C

Rise Time < 30 ms @ nominal input (100% load)

Start-up Time 1,200 ms typ. @ 115 Vac,

500 ms typ. @ 230 Vac (100% load)

Hold-up Time 20 ms typ. @ 115 Vac, 100 ms typ. @ 230 Vac

Dynamic Response

(Overshoot & Undershoot O/P Voltage)

± 10% (1000mVp-p) @ 0-100% load

(Slew Rate: 0.1 A/µS)

Start-up with Capacitive Loads 8,000 µF Max

Mechanical

Case Chassis Aluminium

Case Cover SGCC

Dimensions (L x W x H) 98 x 98 x 38 mm (3.86 x 3.86 x 1.50 inch)

Unit Weight 0.23 kg (0.51 lb)

Indicator Green LED (DC OK)

Cooling System Convection

Terminal

☐

-5V50W1AA

M3.5 x 5 Pins (Rated 300 V / 15 A)

☐

-5V50W1AG

M3.5 x 5 Pins (Rated 300 V / 20 A)

Wire

☐

-5V50W1AA

AWG 14-12

☐

-5V50W1AG

AWG 14-12

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 25 dBA

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Environment

Surrounding Air Temperature Operating -10°C to +70°C

Storage -25°C to +85°C

Power De-rating > 50°C de-rate power by 2.5% / °C

< 100Vac de-rate power by 1.33% / V

(80% load @ 85Vac)

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 5,000 Meters (0 to 16,400 ft)

Shock Test (Non-Operating) IEC 60068-2-27, Half Sine Wave: 50G for a duration of 11 ms,

3 shocks for each 3 directions

Vibration (Non-Operating) IEC 60068-2-6, Random: 5 Hz to 500 Hz (2.09 Grms);

20 min per axis for all X, Y, Z direction

Pollution Degree 2

Protections

Overvoltage 5.75-7.50 V, SELV Output, Hiccup Mode,

Non-Latching (Auto-Recovery)

Overload / Overcurrent 105-150% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature Non-Latching (Auto-Recovery)

Short Circuit Hiccup Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

Reliability Data

MTBF > 700,000 hrs. as per Telcordia SR-332

I/P: 100 Vac, O/P: 100% Load, Ta: 35°C)

Expected Cap Life Time 10 years (115 Vac & 230 Vac, 50% load @ 40°C)

Safety Standards / Directives

Electrical Safety

TUV Bauart

UL/cUL recognized

CB scheme

BIS

EN 60950-1, EN 62368-1

UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E131881)

UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E131881)

IEC 60950-1, IEC 62368-1

IS 13152-1

CE In conformance with EMC Directive 2014/30/EU and Low

Voltage Directive 2014/35/EU

UKCA

In conformance with Electromagnetic Compatibility Regulations

2016 and Electrical Equipment (Safety) Regulations 2016

Galvanic Isolation Input to Output 3.0 KVac

Input to Ground 1.5 KVac

Output to Ground 0.5 KVac

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

EMC

EMC / Emissions CISPR 32, EN/BS EN 55032, FCC Title 47: Class B

Immunity to EN/BS EN 55024

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15 kV

Contact Discharge: 8 kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A1)

80 MHz-1 GHz, 10 V/M with 1 kHz tone / 80% modulation

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2 kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode2): 2 kV

Differential Mode3): 1 kV

Conducted IEC 61000-4-6 Level 3 Criteria A1)

150 kHz-80 MHz, 10 Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

10 A/Meter

Voltage Dips IEC 61000-4-11 100% dip; 1 cycle (20 ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 200 A Criteria A1)

Common Mode2): 2 kV

Differential Mode3): 1 kV

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

Block Diagram

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Device Descriptions

1) Input & Output terminal block connector

2) DC voltage adjustment potentiometer

3) DC OK control LED (Green)

Dimensions

PMT-5V50W1AA: Terminal Block

L x W x H: 98 x 98 x 38 mm (3.86 x 3.86 x 1.50 inch)

PMT-5V50W1AA: Terminal Block

PMT-5V50W1AG: Front Face

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

PMT-5V50W1AG: Front Face

L x W x H: 98 x 98 x 38 mm (3.86 x 3.86 x 1.50 inch)

PML-5V50W1AA: Terminal Block

L x W x H: 98 x 98 x 37.5 mm (3.86 x 3.86 x 1.48 inch)

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

PML-5V50W1AG: Front Face

L x W x H: 98 x 98 x 37.5 mm (3.86 x 3.86 x 1.48 inch)

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Engineering Data

De-rating

Output De-rating VS. Input Voltage

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

surrounding air temperature >50

°C, the

device will run into Over Temperature

Protection. When activated, the output voltage

will go into bouncing mode and will recover

when the surrounding air temperature is

lowered or the load is reduced as far as

necessary to keep the device in working

condition.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance of 20 mm with adjacent units

while the device is in operation.

4. Depending on the surrounding air temperature

and output load delivered by the power

supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please do not hesitate to contact

info@deltapsu.com for more details.

Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation

> 50°C de-rate power by 2.5% / °C

No output power de-rating for the input

voltage from 100 Vac to 264 Vac

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Assembly & Installation

ⒶMounting holes for power supply (device). The power supply shall be mounted on minimum 2 mounting holes using M3 screw

minimum 5 mm length.

ⒷThis surface belongs to customer’s end system or panel where the power supply is mounted.

ⒸConnector

Side Mounting (Vertical) Base Mounting (Vertical) Side Mounting (Horizontal)

Fig. 2 Recommended Mounting Orientations

•PM☐-5V50W1AA / PM☐-5V50W1AG: Use flexible cable (stranded or solid) of AWG No. 14-12. User should calculate and select

the suitable wire specification (type/quantity/diameter) according to actual output current. The torque at the Connector shall not

exceed 13 Kgf.cm. The insulation stripping length should not exceed 0.275” or 7 mm (Refer to Fig. 3).

Fig. 3 Assembly Reference

Ensure the mounted device is kept at ≥ 4 mm safety distance at all sides from other components and equipments. In addition, to ensure

sufficient convection cooling, always maintain a distance of ≥ 20 mm from ventilated surfaces while the device is in operation.

Safety Distance

D1 = 4.0 mm Min.

TECHNICAL DATASHEET

PMT Panel Mount Power

Supply

5 V 50 W 1

Phase

/ PMT-5V50W1A

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (February 2022, Rev. 08)

Fig. 4 Mounting Screw

Safety Instructions

•If user’s mounting orientation is not according to the recommended mounting orientations, please consult Delta for further

information.

•L frame (PML) and Open frame (PMB) options are to be manufactured by Delta and not to be reconfigured by users from the

standard enclosed configuration.

•The device is not recommended to be placed on low thermal conductive surface. For example, plastics.

•The enclosure of the device can become very hot depending on the ambient temperature and load of the power supply. Do not

touch the device while it is in operation or immediately after power is turned OFF. Risk of burning!

•Do not touch the terminals while power is being supplied. Risk of electric shock.

•Prevent any foreign metal, particles or conductors from entering the device through the openings during installation.

It may cause electric shock, safety hazard, fire and/or product failure.

•The power supply must be mounted by metal screws onto a grounded metal surface. It is highly recommended that the Earth

terminal on the connector be connected to the grounded surface.

•Warning (For Standard Terminal Block and Front Face Terminal Block products): When connecting the device, secure Earth

connection before connecting L and N. When disconnecting the device, remove L and N connections before removing the Earth

connection.

For PMT and PML Series (Refer to Fig. 4): Only use M3 screw ≤ 3 mm

through the base mounting holes. This is to keep a safe distance between

the screw and internal components. Recommended mounting tightening

torque: 4~7 Kgf.cm.

Andere Handbücher für PMT Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Delta Stromversorgung Handbücher

Delta

Delta PMT2 150 W Series Bedienungsanleitung

Delta

Delta LYTE DRL-24V240W1A Series Bedienungsanleitung

Delta

Delta PMC Series Bedienungsanleitung

Delta

Delta AX Series Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Delta

Delta PM 24V200W1AI Series Bedienungsanleitung

Delta

Delta PMC-24V050W1AA Bedienungsanleitung

Delta

Delta CliQ Bedienungsanleitung

Delta

Delta PMC Series Bedienungsanleitung

Delta

Delta DRS-24V30W1NZ Bedienungsanleitung

Delta

Delta PMC-24V050W1AA Bedienungsanleitung

Delta

Delta D750 Bedienungsanleitung

Delta

Delta LZ-16/R10 Bedienungsanleitung

Delta

Delta PMT Series Bedienungsanleitung

Delta

Delta CliQ DRP024V120W1AA Kurzanleitung

Delta

Delta PMC-24V100W1AA Bedienungsanleitung

Delta

Delta PMR V320WD Series Bedienungsanleitung

Delta

Delta HPP-1K5A01KAT Bedienungsanleitung

Delta

Delta FORCE-GT DRF-24V960W3GBA Bedienungsanleitung

Delta

Delta DRP048V060W1B Series Bedienungsanleitung

Delta

Delta DNPS01 Bedienungsanleitung

Delta

Delta PMC-12V060W1N Series Bedienungsanleitung

Delta

Delta PMC-12V100W1AA Bedienungsanleitung

Delta

Delta PMU-27V155WC A Series Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung