Delta CliQ II DRP024V060W1B Bedienungsanleitung

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Highlights & Features

•Universal AC input voltage range

•High Efficiency > 90.0%

•Power Boost of 150% for 5 seconds

•Full corrosion resistant aluminium casing

•Extreme low temperature cold start at -40°C

•Conformal coating on PCBAs to protect against common

dust and chemical pollutants

•Hazardous Locations approval to ATEX and Class I, Div 2

(DRP024V060W1BA)

•Certified according to IEC/EN/UL 62368-1

Safety Standards

CB Certified for worldwide use

Model Number: DRP024V060W1B☐

Unit Weight: 0.37 kg (0.82 lb)

Dimensions (L x W x D): 121 x 32 x 125 mm

(4.76 x 1.26 x 4.92 inch)

General Description

The CliQ II DIN rail power supply series from one of the world’s leading power supply companies, Delta Electronics Group, offers output

voltage of 24 V. These products are encased in rugged yet lightweight full aluminium body that can withstand shock and vibration

according to IEC 60068-2 standard. The series of single phase products can operate over a wide temperature range of -25°C to +80°C.

These products also feature universal AC input voltage range from 85 Vac to 264 Vac and the power will not de-rate throughout the entire

range. Another great feature is the conformal coating on the PCBA which allows selected models to be certified to ATEX and Class I, Div

2 for use in hazardous locations.

Model Information

CliQ II DIN Rail Power Supply

Model

Number

Input Voltage Range

Rated Output

oltage

Rated Output Curr

ent

DRP024V060W1B☐85-264 Vac (120-375 Vdc) 24 Vdc 2.50 A

Model Numbering

024V

060W

□

DIN Rail Power Supply Output Voltage Output Power Single Phase CliQ II Series A - Metal Case,

with Class I, Div 2 and ATEX

N - Metal Case,

without Class I, Div 2

and ATEX

Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Specifications

Input Ratings / Characteristics

Nominal Input Voltage 100-240 Vac

Input Voltage Range 85-264 Vac

Nominal Input Frequency 50-60 Hz

Input Frequency Range 47-63 Hz

DC Input Voltage Range* 120-375 Vdc

Input Current < 1.40 A @ 115 Vac, < 0.80 A @ 230 Vac

Efficiency at 100% Load > 90.0% @ 115 Vac & 230 Vac

Max Power Dissipation 0% load < 0.5 W @ 115 Vac & 230 Vac

100% load < 7.4 W @ 115 Vac & 230 Vac

Max Inrush Current (Cold Start) < 20 A @ 115 Vac, < 35 A @ 230 Vac

Leakage Current < 1 mA @ 240 Vac

*Safety approval according to IEC/EN/UL 60950-1 and IEC/EN/UL 62368-1.

Output Ratings / Characteristics**

Nominal Output Voltage 24 Vdc

Factory Set Point Tolerance 24 Vdc ± 2%

Output Voltage Adjustment Range 24-28 Vdc

Output Current 2.50 A (continuously operating at 24 V)

3.75 A (Power Boost for 5 seconds at 24 V, refer to the details

in the Functions section)

Output Power 60 W (continuously operating at 24 V)

90 W (Power Boost for 5 seconds at 24 V

, refer to the details in

the Functions section)

Line Regulation < 0.5% (@ 85-264 Vac input, 100% load)

Load Regulation < 1.0% (@ 85-264 Vac input, 0-100% load)

PARD*** (20 MHz) < 150 mVpp

Rise Time

< 100 ms @ nominal input (100% load)

Start-up Time < 2,000 ms @ nominal input (100% load)

Hold-up Time > 20 ms @ 115 Vac,

> 125 ms @ 230 Vac (100% load)

Dynamic Response

(Overshoot & Undershoot O/P Voltage)

± 5% @ 85-264 Vac input, 0-100% load

(Slew Rate: 0.1 A/μs, 50% duty cycle @ 50 Hz to 1 KHz)

Start-up with Capacitive Loads 8,000 µF Max

**For power de-rating from 50°C to 80°C, see power de-rating on page 3.

***PARD is measured with an AC coupling mode, 5cm wires, and in parallel with 0.1 μF ceramic capacitor & 47 μF electrolytic capacitor.

Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Mechanical

Case Cover / Chassis

Aluminium

Dimensions (L x W x D) 121 x 32 x 125 mm (4.76 x 1.26 x 4.92 inch)

Unit Weight 0.37 kg (0.82 lb)

Indicator Green LED DC OK

Cooling System Convection

Terminal Input 3 Pins (Rated 300 V/15A)

Output 2 Pins (Rated 300 V/15A)

Wire Input / Output AWG 20-12

Mounting Rail Standard TS35 DIN Rail in accordance with EN 60715

Noise (1 Meter from power supply) Sound Pressure Level (SPL) < 40 dBA

Environment

Surrounding Air Temperature Operating -25°C to +80°C (Cold Start at -40°C)

Storage -40°C to +85°C

Power De-rating Vertical Mounting > 50°C de-rate power by 2.5% / °C

Horizontal Mounting > 50°C de-rate power by 2.5% / °C

Operating Humidity 5 to 95% RH (Non-Condensing)

Operating Altitude 0 to 2,500 Meters (8,200 ft.)

Shock Test Non-Operating IEC 60068-2-27, 30 G (300 m/S²) for a duration of 18 ms,

1 time per direction, 2 times in total

Vibration Non-Operating IEC 60068-2-6, 10 Hz to 500 Hz @ 30 m/S² (3 G peak);

60 min per axis for all X, Y, Z direction

Over Voltage Category III According to IEC/EN 62477-1 / EN 60204-1

(clearance and creepage distances) and

IEC 62103 (safety part)

Pollution Degree

Protections

Overvoltage < 32 V, ±10%, SELV Output, Hiccup Mode,

Non-Latching (Auto-Recovery)

Overload / Overcurrent > 150% of rated load current, Hiccup Mode,

Non-Latching (Auto-Recovery)

Over Temperature < 80°C Surrounding Air Temperature @ 100% load,

Non-Latching (Auto-Recovery)

Short Circuit Hiccup Mode, Non-Latching

(Auto-Recovery when the fault is removed)

Internal Fuse at L pin T3.15AH

Degree of Protection IP20

Protection Against Shock Class I with PE* connection

*PE: Primary Earth

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Reliability Data

MTBF > 800,000 hrs. as per Telcordia SR-332

I/P: 115 Vac & 230 Vac, O/P: 100% load, Ta: 25°C

Expected Cap Life Time 10 years (115 Vac & 230 Vac, 50% load @ 40°C)

Safety Standards / Directives

Electrical Equipment of Machines

EN 60204-1 (over voltage category III)

Electrical Equipment for Use in Electrical Power Installations IEC/EN/BS EN 62477-1 / IEC 62103

Safety Entry Low Voltage SELV (IEC 60950-1)

Electrical Safety TUV Bauart EN 62368-1

UL/cUL recognized UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395)

UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)

CB Scheme IEC 60950-1, IEC 62368-1

UKCA BS EN 62368-1

Industrial Control Equipment UL/cUL listed UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)

CSA CSA C22.2 No. 107.1-01 (File No. 181564)

Hazardous Location / ATEX

(For DRP024V060W1BA)

cCSAus CSA C22.2 No. 213-M1987, ANSI / ISA 12.12.01:2011

[Class I, Division 2, Group A, B, C, D T4, Ta= -25°C to +80°C

(> +50°C derating)]

ATEX EN 60079-0:2009, EN 60079-15:2010 [ II 3G Ex nA nC IIC

T4 Gc, Ta= -25°C to +80°C (> +50°C derating)]

Certificate No. EPS 12 ATEX 1 491 X

CE In conformance with EMC Directive 2014/30/EU and

Low Voltage Directive 2014/35/EU

For DRP024V060W1BA:

In conformance with Equipment for explosive atmospheres

(ATEX) directive 2014/34/EU

UKCA In conformance with Electrical Equipment

(Safety) Regulations

2016 No. 1011 and

The Electromagnetic Compatibility Regulations 2016 No. 1091

Galvanic Isolation Input to Output 4.0 KVac

Input to Ground 1.5 KVac

Output to Ground 1.5 KVac

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

EMC

Emissions (CE & RE) Generic Standards: CISPR 32, EN/BS EN 55032,

KN 32 (for DRP024V060W1BN),

CISPR 11, EN/BS EN 55011, FCC Title 47: Class B

Component Power Supply for General Use EN/BS EN 61204-3

Immunity Generic Standards: EN/BS EN 55024,

KN 35 (for DRP024V060W1BN),

EN/BS EN 61000-6-1, EN/BS EN 61000-6-2

Electrostatic Discharge IEC 61000-4-2 Level 4 Criteria A1)

Air Discharge: 15 kV

Contact Discharge: 8 kV

Radiated Field IEC 61000-4-3 Level 3 Criteria A1)

80 MHz-1 GHz, 10V/M, 80% modulation (1 kHz)

Electrical Fast Transient / Burst IEC 61000-4-4 Level 3 Criteria A1)

2 kV

Surge IEC 61000-4-5 Level 3 Criteria A1)

Common Mode2): 2 kV

Differential Mode

: 1 kV

Conducted IEC 61000-4-6 Level 3 Criteria A1)

150 kHz-80 MHz, 10 Vrms

Power Frequency Magnetic Fields IEC 61000-4-8 Criteria A1)

3 A/Meter

Voltage Dips and Interruptions IEC 61000-4-11 100% dip; 1 cycle (20 ms); Self Recoverable

Low Energy Pulse Test (Ring Wave) IEC 61000-4-12 Level 3 Criteria A1)

Common Mode2): 2 kV

Differential Mode

: 1 kV

Harmonic Current Emission

IEC/EN/BS EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN/BS EN 61000-3-3

1) Criteria A: Normal performance within the specification limits

2) Asymmetrical: Common mode (Line to earth)

3) Symmetrical: Differential mode (Line to line)

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Block Diagram

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Device Description

1) Input terminal block connector

2) Output terminal block connector

3) DC Voltage adjustment potentiometer

4) DC OK control LED (Green)

5) Universal mounting rail system

Dimensions

L x W x D: 121 x 32 x 125 mm (4.76 x 1.26 x 4.92 inch)

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Engineering Data

Output Load De-rating VS Surrounding Air Temperature

Output Load De-rating VS Input Voltage

Note

1. Power supply components may degrade, or

be damaged, when the power supply is

continuously used outside the shaded region,

refer to the graph shown in Fig. 1.

2. If the output capacity is not reduced when the

urrounding air temperature exceeds its

specification as defined on Page 3 under

“Environment”, the device may run into Over

Temperature Protection. When activated, the

output voltage will go into bouncing mode and

will rec

over when the surrounding air

temperature is lowered or the load is reduced

as far as necessary to keep the device in

working condition.

3. In order for the device to function in the

manner intended, it is also necessary to keep

a safety distance as recommended in the

safety instructions while the device is in

operation.

4. Depending on the surrounding air temperature

and output load delivered by the power

supply, the device can be very hot!

5. If the device has to be mounted in any other

orientation, please contact info@deltapsu.com

for more details.

Fig. 1 De-rating for Vertical and Horizontal Mounting Orientation

> 50°C de-rate power by 2.5% / °C

No output power de-rating across the entire

input voltage range

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Assembly & Installation

The power supply unit (PSU) can be mounted on 35 mm DIN rails in accordance with EN 60715. The device should be installed with

input terminal block at the bottom.

Each device is delivered ready to install.

Mounting

Dismounting

Fig. 2.1 Mounting

Snap on the DIN rail as shown in Fig. 2.1:

1. Tilt the unit upwards and insert it onto the DIN rail.

2. Push downwards until stopped.

3. Press against the bottom front side for locking.

4. Shake the unit slightly to ensure that it is secured.

Fig. 2.2 Dismounting

To uninstall, pull or slide down the latch with screw driver as

shown in Fig. 2.2. Then slide the power supply unit (PSU) in the

opposite direction, release the latch and pull out the power

supply unit (PSU) from the rail.

CAUTION: Must tighten wire to housing (Fig. 3.1) before

plugging into the terminal block connection (Fig. 3.2).

In accordance to EN 60950 / UL 60950 and EN 62368 / UL

62368, flexible cables require ferrules. Use appropriate copper

cables designed to sustain operating temperature of 60°C / 75°C

or more to fulfill UL requirements.

Connection

Fig. 3.1 Fig. 3.2

TECHNICAL DATASHEET

CliQ II DIN Rail Power

Supply

24 V 60 W 1

Phase

/ DRP024V060W1B

□

All parameters are specified at 25°C ambient and AC input unless otherwise indicated.

www.DeltaPSU.com (September 2021, Rev. 11)

Safety Instructions

Vertical Mounting

•ALWAYS switch mains of input power OFF before connecting and disconnecting the input voltage to the unit. If mains are not turned

OFF, there is risk of explosion / severe damage.

•To guarantee sufficient convection cooling, please refer to the following instructions to ensure sufficient clearance around

the device.

Vertical Mounting: 50 mm (1.97 inch) above and below the device as well as a lateral distance of 20 mm (0.79 inch) to other

units.

Horizontal Mounting: 50 mm (1.97 inch) above and below the device as well as a lateral distance of 50 mm (1.97 inch) to

other units.

•Note that the enclosure of the device can become very hot depending on the surrounding air temperature and load of the power

supply. Risk of burns!

•Only plug in and unplug connectors when power is turned off!

•DO NOT insert any objects into the unit.

•Hazardous voltages may be present for up to 5 minutes after the input mains voltage is disconnected. Do not touch the unit during

this time.

•The power supplies are built in units and must be installed in a cabinet or room (condensation free environment and indoor location)

that is relatively free of conductive contaminants.

•CAUTION: “For use in a controlled environment”.

For DRP024V060W1BA:

•The power supplies unit must be installed in an IP54 enclosure or cabinet in the final installation. The enclosure or cabinet must

comply with EN 60079-0 or EN 60079-15.

•Warning: Explosion Hazard - Substitution of components may impair suitability for Class I, Division 2.

•Warning: Explosion Hazard - Do not disconnect equipment or adjust potentiometer unless the power has been switched off or the

area is known to be non-hazardous.

Horizontal Mounting

Inhaltsverzeichnis

Andere Delta Stromversorgung Handbücher

Delta

Delta LZ-32/R19 Bedienungsanleitung

Delta

Delta HPP-1K5A01KAT Bedienungsanleitung

Delta

Delta PMC Series Bedienungsanleitung

Delta

Delta PMT2 75 W Series Bedienungsanleitung

Delta

Delta PMC-12V035W1AA Bedienungsanleitung

Delta

Delta LZ-16/R10 Bedienungsanleitung

Delta

Delta PMT Series Bedienungsanleitung

Delta

Delta PMC-24V050W1AA Bedienungsanleitung

Delta

Delta DVP-SE Series Bedienungsanleitung

Delta

Delta MCS 3000 Bedienungsanleitung

Delta

Delta PMC-24V100W1AA Bedienungsanleitung

Delta

Delta DRP-24V240W2BN Bedienungsanleitung

Delta

Delta GPS-850HB A A22 Bedienungsanleitung

Delta

Delta LYTE II Bedienungsanleitung

Delta

Delta PMF-24V200WC Bedienungsanleitung

Delta

Delta HDS 7200 Bedienungsanleitung

Delta

Delta PMC-05V050W1AA Bedienungsanleitung

Delta

Delta Platinum GPS-650LB A A22 Bedienungsanleitung

Delta

Delta PMT-4V350W1A Series Bedienungsanleitung

Delta

Delta CliQ DRP024V060W1AA Bedienungsanleitung

Delta

Delta PMT Series Bedienungsanleitung

Delta

Delta CliQ II DRP024V480W3B Series Bedienungsanleitung

Delta

Delta PMT2 150 W Series Bedienungsanleitung

Delta

Delta LYTE DRL-24V480W1A Series Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung