Denso BHT-6000 Bedienungsanleitung

User's Manual

any means without permission in writing from the publisher.

Specifications are subject to change without prior notice.

Microsoft®, MS-DOS®, and QuickBASIC®are registered trademarks of Microsoft Cor-

poration.

IBM®, PC/AT®, and PS/2®are registered trademarks of International Business Ma-

chines Corporation.

BHT, CU, BHT-protocol, BHT-Ir protocol, and BHT-BASIC 3.0 are trademarks of DENSO

CORPORATION.

Preface

Please READ through these operating instructions carefully. It will enable you to

operate your BHT-6000 correctly.

After you have finished reading the instructions, keep this manual handy for speedy

reference.

The BHT-6000 series is available in two types: the normal-range type and long-range

type (BHT-6000D). In this manual, both types are called the BHT-6000 unless otherwise

specified.

How this book is organized

This manual is made up of five chapters and appendices.

Chapter 1. Quick Guide

Describes the basic operating method of the BHT-6000 and the related notes.

Chapter 2. Getting Started the BHT-6000 and System Mode

Summarizes the BHT-6000 system configuration and describes the operation including

preparation and System Mode (which is required for the efficient use of application

programs).

Chapter 3. Communications Operations of BHT-6000

Describes the communications operations of the BHT-6000--the RS-232C interface

specifications, the basic communications specifications, and the communications

protocols--for data transmission with the host computer or other devices.

Chapter 4. Error Messages

Lists the error messages which will appear on the LCD if some error occurs in the BHT-

6000.

Chapter 5. Handling the CU-6000 (Option)

Describes the handling procedure of the CU-6000, the interfacing with the host compu-

ter, and the charging of the Ni-MH battery cartridge.

Appendix A: Specifications

Appendix B: A Typical Basic Operation

Appendix C: Alphabet Input Procedure

iii

■Related Publications

BHT-BASIC 3.0 Programmer's Manual

Transfer Utility Guide

Ir-Transfer Utility C Guide

■Screen Indication

The lettering in the screens in this manual is a little different from that in the actual

screens. File names used are only for description purpose, so they will not appear if

you have not set files having those names.

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

■Please READ through this manual carefully. It will enable you to use the BHT-6000

and CU-6000 correctly.

■Always keep this manual nearby for speedy reference.

WARNING Alerts you to those conditions which could cause seri-

ous bodily injury or death if the instructions are not

followed correctly.

CAUTION Alerts you to those conditions which could cause minor

bodily injury or substantial property damage if the in-

structions are not followed correctly.

Meaning of Symbols

A triangle ( ) with a picture inside alerts you to a warning of danger. Here

you see the warning for electrical shock.

A diagonal line through a circle ( ) alerts you to something you should not

do; it may or may not have a picture inside. Here you see a screwdriver

inside the circle, meaning that you should not disassemble.

A black circle ( ) with a picture inside alerts you to something you MUST

do. This example shows that you MUST unplug the power cord.

Strict observance of these warning and caution indications are a MUST for preventing

accidents which could result in bodily injury and substantial property damage. Make

sure you fully understand all definitions of these terms and related symbols given

below, before you proceed to the text itself.

WARNING

Handling the battery cartridge

•Never disassemble or heat the battery

cartridge, nor put it into fire or water;

doing so could cause battery-rupture or

leakage of battery fluid, resulting in a

fire or bodily injury.

•Do not carry or store the battery car-

tridge together with metallic ball-point

pens, necklaces, coins, hairpins, etc.

Doing so could short-circuit the termi-

nal pins, causing the batteries to rup-

ture or the battery fluid to leak, result-

ing in a fire or bodily injury.

•Avoid dropping the battery cartridge or letting it undergo any shock

or impact.

Doing so could cause the batteries to break, generate heat, rupture or

burn.

•Only use the dedicated charger (CU-6001

or C-600) for charging the Ni-MH bat-

tery cartridge.

Using a different type of charger could

cause battery-rupture or leakage of bat-

tery fluid and result in a fire, bodily in-

jury, or serious damage to property.

Charge only

with the

dedicated

device.

DedicatedUndedicated

•Never charge the Ni-MH battery cartridge where any inflammable

gases may be emitted; doing so could cause fire.

Never

put me

into fire!

Do not

short-

circuit

me!

WARNING

Handling the CU

•If smoke, abnormal odors or noises come from the CU, immediately

turn off the power, unplug the AC adapter from the wall socket, and

contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

•If foreign material or water gets into the CU, immediately turn off the

power, unplug the AC adapter from the wall socket, and contact your

nearest dealer.

Failure to do so could cause fire or electrical shock.

•If you drop the CU so as to damage its housing, immediately turn off

the power, unplug the AC adapter from the wall socket, and contact

your nearest dealer.

Failure to do so could cause fire or electrical shock.

•Never use the CU for charging anything other than the specified

battery cartridges.

Doing so could cause heat, battery-rupture, or fire.

•Never bring any metals into contact with the output terminals.

Doing so could produce a large current through the CU, resulting in

heat or fire, as well as damage to the CU.

•Use the furnished AC adapter only. Failure to do so could result in

fire.

•Never use the CU on the line voltage other than the specified level.

Doing so could cause the CU to break or burn.

•If the power cord of the AC adapter is damaged (e.g., exposed or

broken lead wires), stop using it and contact your nearest dealer.

Failure to do so could result in a fire or electrical shock.

vii

CAUTION

Basic handling tips

•Never put the BHT in places where there

are excessively high temperatures, such

as inside closed-up automobiles, or in

places exposed to direct sunlight.

Doing so could affect the housing or

parts, resulting in a fire.

•Avoid using the BHT in extremely hu-

mid or dusty areas, or where there are

drastic temperature changes.

Moisture or dust will get into the BHT,

resulting in malfunction, fire or electri-

cal shock.

•Never disassemble or modify the BHT; doing so could result in an

accident such as break or fire.

Never

disassemble

This

humidity

is killing

me!

Hot-

house

I’m

freezing!

Refrigeration

I’m burning

up!

Handling the Ni-MH battery cartridge

•Never charge a wet or damp Ni-MH battery cartridge.

Doing so could cause the batteries to break, generate heat, rupture,

or burn.

Handling the BHT

•If smoke, abnormal odors or noises come from the BHT, immediately

turn off the power, pull out the dry batteries or the battery cartridge,

and contact your nearest dealer.

Failure to do so could cause smoke or fire.

•If foreign material or water gets into the

BHT, immediately turn off the power,

pull out the dry batteries or the battery

cartridge, and contact your nearest

dealer.

Failure to do so could cause smoke or

fire.

Keep me

away from

water!

viii

CAUTION

•If you drop the BHT so as to damage its hous-

ing, immediately turn off the power, pull out

the dry batteries or the battery cartridge, and

contact your nearest dealer.

Failure to do so could cause smoke or fire.

•For those machines using dry batteries, do not mistake the plus and

minus marks when loading dry batteries into the BHT.

Failure to do so could cause battery-rupture or leakage of battery

fluid, resulting in bodily injury, fire, or property damage.

•For those machines using dry batteries, do not use anything other

than the specified type of batteries, nor use new and old batteries

together.

Doing so could cause battery-rupture or leakage of battery fluid,

resulting in bodily injury, fire, or property damage.

•Do not use batteries or power sources other than the specified ones;

doing so could generate heat or cause malfunction.

Handling the CU

•If you will not be using the CU for a long time, be sure to unplug the

AC adapter from the wall socket for safety.

Failure to do so could result in a fire.

•When caring for the CU, unplug the AC adapter from the wall socket

for safety.

Failure to do so could result in an electrical shock.

•Never cover or wrap up the CU or AC adapter in a cloth or blanket.

Doing so could cause the unit to heat up inside, deforming its hous-

ing, resulting in a fire.

Always use the CU and AC adapter in a well-ventilated area.

•Do not place the CU anyplace where it may be subjected to oily

smoke or steam, e.g., near a cooking range or humidifier.

Doing so could result in a fire or electrical shock.

Do not

drop

me!

Inhaltsverzeichnis

Andere Denso Barcode-Lesegerät Handbücher

Denso

Denso BHT-500B Bedienungsanleitung

Denso

Denso AT30Q-SM Bedienungsanleitung

Denso

Denso AT20B-SM Bedienungsanleitung

Denso

Denso BHT-800 Series Handbuch

Denso

Denso BHT-805B Bedienungsanleitung

Denso

Denso GT10B-SB Bedienungsanleitung

Denso

Denso GT20Q-SB Bedienungsanleitung

Denso

Denso BHT-7500S Bedienungsanleitung

Denso

Denso BHT-904B Bedienungsanleitung

Denso

Denso BHT-8000 Installationshandbuch

Denso

Denso GT10B-SU Bedienungsanleitung

Denso

Denso BHT-805BWB Bedienungsanleitung

Denso

Denso BHT-100B Bedienungsanleitung

Denso

Denso BHT-400-CE Bedienungsanleitung

Denso

Denso BHT-1700BWB Gebrauchsanweisung

Denso

Denso GT10B-SM Bedienungsanleitung

Denso

Denso HC36IITK-A Bedienungsanleitung

Denso

Denso BHT-8000 Bedienungsanleitung

Denso

Denso BHT-7000 Bedienungsanleitung

Denso

Denso BHT-4000 Bedienungsanleitung

Denso

Denso GT10Q-SR Bedienungsanleitung

Denso

Denso BHT-300BWB Handbuch

Denso

Denso BHT-700-CE Bedienungsanleitung

Denso

Denso BHT-700BB-CE Handbuch

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung