Denso BHT-8000 Installationshandbuch

Operation manual

1.Data communication with potable printer.

(1) Registration of portable printer and selection of the portable printer

-Transmits the registration signal from potable printer and register the portable printer at the BHT-8000.

-Transmits the selection signal from BHT-8000 to the portable printer and connect the BHT-8000 with

portable printer.

(2) Bar code reading and data transfer

BHT-8000 reads the bar code and transmits the reading data to portable printer. Portable printer

prints the receipt.

2.Data communication in public circuit

(1) Registration of cell phone and selection of the cellular phone

-Transmits the registration signal from cellular phone and register the cellular phone at the BHT-8000.

-Transmits the selection signal from BHT-8000 to the cell phone and connect the BHT-8000 with cellular

phone.

(2) Bar code reading and call

When BHT-8000 reads the bar code, the reading data is transmitted from cellular phone to the host

by public circuit.

Bar code

Bluetooth RF signal

Cellular RF signal

Host

modem

Bar code

Components and Functions

Indication LED

Illuminates in green when the BHT has successfully read the bar codes.

Built-in antenna

Used for Bluetooth wireless communication.

Do not cover this by hand. Doing so may result

in communications failures.

Trigger switch (M4 key)

Press this switch to start

bar-code reading.

Liquid crystal

display (LCD)

Shows the

characters and

graphic patterns.

Trigger switch (M3 key)

Press this switch to start

bar-code reading.

Optical interface port

Used to exchange

data/programs with the host

computer via the computer's

integrated IR port or via the

optical communication unit

CU-8000.

Hand strap

Be sure to put your hand through

this strap to prevent you from

dropping the BHT accidentally.

Bar-code reading

window

Battery cover lock

Use this lock to lock/unlock the battery cover.

Battery cover

Remove this cover to replace

batteries.

Connector cover

Inside this cover is the

direct-connect interface port.

Reading Bar Codes

Turn the BHT on, bring the bar-code reading window to the bar code to be scanned,

and press the trigger switch. The BHT turns on the illumination LED to scan the bar

code.

When the BHT has read the bar code successfully, the indicator LED will illuminate

in green.

·If the BHT fails to read due to specular effects

or other factors, change the scanning angle of

the reading window or the distance from codes

as shown at right, and try it again. (Specular

effects occur when the reflection of the light

from the bar code becomes excessively strong.

This can easily happen when the reflecting

surface is polished or covered with vinyl.)

·To read bar codes wider than the readable area of the bar-code reading window,

pull the bar-code reading window away from bar codes. The BHT-8000DB can

read bar codes at a maximum distance of 40 cm (15.7") from the bar-code

reading window.**

** Under the following conditions:

- Ambient illuminance: 500 lux (fluorescent lamp)

- ITF conforming to the UPC Shipping Container

Code

- PCS value: 0.9 or more

- Minimum narrow bar width: 1.2 mm min.

(47.2 mils min.)

·The bar code reading procedure may differ depending upon the application used,

so follow the application’s manual.

·Before reading labels, clean them if stained.

·Avoid using the BHT in direct sunlight. The BHT might fail to rea

correctly.

·To read bar codes on curved surfaces, apply the bar-code reading windo

to the center of each bar code at a right angle.

·If you pull the bar-code reading window away from bar codes, the actual

scanning range will become narrower than the range covered by the

illumination LED.

·The light intensity of the illumination LED will vary depending upon the

scanning conditions and variation of its elements.

Using Bluetooth™

The BHT-8000DB supports Bluetooth wireless data transmission.

·If there are too many communications errors, first make sure that the BHT points

directly at an access point because the 2.4 GHz band requires a more or less

straight line path. Note also that the low-power radio waves have trouble passing

through human bodies and other obstacles along that path.

·In the vicinity of wireless LAN devices using radio waves in the 2.4 GHz band,

Bluetooth link operation may cause interference to radio communications,

resulting in decreased communications speed or communications failures.

·The Bluetooth link will not operate properly in the vicinity of microwave ovens,

industrial heaters, high-frequency medical equipment, and other sources of radio

waves in the 2.4 GHz band.

·Electromagnetic noise from personal computers, refrigerators, and other home

appliances can also interfere with link operation.

·Environmental factors that can also interfere with link operation include large

metallic objects, metallic dust, or metallic walls in the vicinity of the path and

vibration at either end.

To System Designers:

·Before developing the application, make sure that the intended

environment is free of the interference factors above and thus actually

capable of supporting link operation.

·Assume that there will be communications failures requiring robust retry

capabilities in the software.

·When introducing the BHT link operation into an environment where

equipment using radio waves in the 2.4 GHz band operates or when

introducing such equipment after the introduction of the BHT lin

operation, be sure to confirm that the BHT radio link operates properl

with all equipment being in operation beforehand.

·If the environment of the radio communications system is changed after

the introduction (e.g., newly installed household appliances and

movement/addition of shelves or objects), then confirm that the radio link

operates properly again before the actual use.

Andere Handbücher für BHT-8000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Denso Barcode-Lesegerät Handbücher

Denso

Denso BHT-700-CE Bedienungsanleitung

Denso

Denso SE1-BB Bedienungsanleitung

Denso

Denso BHT-800 Series Handbuch

Denso

Denso BHT-100B Bedienungsanleitung

Denso

Denso BHT-604B Bedienungsanleitung

Denso

Denso Power Net Terminal BHT-103 Bedienungsanleitung

Denso

Denso BHT-4000 Bedienungsanleitung

Denso

Denso BHT-1700BWB Gebrauchsanweisung

Denso

Denso BHT-805BWB Bedienungsanleitung

Denso

Denso GT10B-SM Bedienungsanleitung

Denso

Denso GT10Q-SR Bedienungsanleitung

Denso

Denso BHT-700BB-CE Handbuch

Denso

Denso BHT-300BWB Handbuch

Denso

Denso BHT-7000 Bedienungsanleitung

Denso

Denso BHT-6000 Bedienungsanleitung

Denso

Denso GT20Q-SB Bedienungsanleitung

Denso

Denso GT10B-SB Bedienungsanleitung

Denso

Denso BHT-700-WM Bedienungsanleitung

Denso

Denso BHT-7000 Bedienungsanleitung

Denso

Denso BHT-805B Bedienungsanleitung

Denso

Denso BHT-825QW Bedienungsanleitung

Denso

Denso AT20B-SM Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Denso

Denso BHT-1400QWB-CE Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung

Atid

Atid AT188N Plus Bedienungsanleitung