Digi ConnectCore 6 Bedienungsanleitung

ConnectCore® 6

Android/Yocto

Getting Started Guide

Revision history—90001397

Revision Date Description

A May, 2014 Initial release

B May, 2017 Updated branding and made editorial enhancements.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United

States and other countries worldwide. All other trademarks mentioned in this document are the

property of their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Send comments

Documentation feedback: To provide feedback on this document, send your comments to

techcomm@digi.com.

Customer support

Digi Technical Support: Digi offers multiple technical support plans and service packages to help our

customers get the most out of their Digi product. For information on Technical Support plans and

pricing, contact us at +1 952.912.3444 or visit us at www.digi.com/support.

ConnectCore 6 Android/Yocto Getting Started Guide 2

Contents

Introduction

Step 1: Identify ConnectCore 6 hardware components

Step 2: Connect your ConnectCore 6 hardware

Step 3: Power-up your ConnectCore 6

Serial output 9

Video output 9

Step 4: Create a bootable microSD card from image

Create a bootable microSD card using the Linux OS 10

Create a bootable microSD card using the Windows OS 11

Step 5: Boot the ConnectCore 6 using a microSD card

Step 6: Update ConnectCore 6 firmware

Update eMMC with Yocto firmware images 14

Update eMMC with Android firmware images 15

What's Next?

Android 19

Yocto 19

ConnectCore 6 Android/Yocto Getting Started Guide 3

Introduction

This Getting Started Guide will help you through the procedure for booting your ConnectCore® 6 for the

very first time.

It covers the following topics:

nHardware components and connections

nPowering your ConnectCore 6 device

nCreating a bootable MicroSD card from an image

nBoot from a MicroSD card

nUpdate eMMC firmware

nWhat's next?

ConnectCore 6 Android/Yocto Getting Started Guide 4

Step 1: Identify ConnectCore 6 hardware

components

Identify the following components located in your ConnectCore 6 kit:

nConectCore 6 module: An SMD module with CPU, SDRAM, eMMC, and PMIC

nAdapter board: The board where the ConnectCore 6 module is soldered for connecting to a

Digi development board

nDevelopment board: A JSCCWMX53 development board with connectors

ConnectCore 6 Android/Yocto Getting Started Guide 5

Step 2: Connect your ConnectCore 6 hardware

Connect the hardware components of your ConnectCore 6:

1. Connect the serial cable to the UART port.

2. Connect the Ethernet cable to the Ethernet port on the adapter board.

3. Connect the LVDS cable from the LCD screen to the LVDS connector on the development board.

ConnectCore 6 Android/Yocto Getting Started Guide 6

Step 2: Connect your ConnectCore 6 hardware

ConnectCore 6 Android/Yocto Getting Started Guide 7

4. Connect the I2C cable from the LCD touch screen to the I2C connector on the development

board.

5. Connect the antenna to the primary connector (P14) on the development board.

6. (Optional) Connect the HDMI cable to a standard HDMI connector on the adapter board (J22).

7. Add the appropriate plug and connect the provided power supply (X24).

WARNING! Choose an HDMI cable with a low profile (or a 90 angle adapter) to

accomodate the nearby JTAG connector. Do not force the connection of the HDMI cable

to avoid breaking the connector.

Step 3: Power-up your ConnectCore 6

ConnectCore 6 Android/Yocto Getting Started Guide 8

Step 3: Power-up your ConnectCore 6

The ConnectCore 6 comes with Android OS pre-installed on the internal eMMC memory. Once you

switch on the board, it boots directly into the Android operating system.

Serial output 9

Video output 9

Step 3: Power-up your ConnectCore 6 Serial output

ConnectCore 6 Android/Yocto Getting Started Guide 9

Serial output

Open a serial terminal at 115200/8/N/1 to see the serial output and get the console terminal.

Video output

Android splash and desktop should appear on the LCD display. If you connected an HDMI monitor to

the adapter board, the image should appear cloned on the monitor (resolution scales to the resolution

of the connected LCD).

Step 4: Create a bootable microSD card from image Create a bootable microSD card using the Linux OS

ConnectCore 6 Android/Yocto Getting Started Guide 10

Step 4: Create a bootable microSD card from image

To complete this step you need the following:

nRoot/administrator permissions

nA MicroSD card with a minimum of 2 GB

WARNING! The following procedure will destroy existing data in the uSD card.

1. Download any bootable SD image (Android or Yocto) of your choice from the Product Support

tab at www.digi.com/cc6.

2. Extract the .sdcard file from the zip folder you downloaded, and place it in a folder of your

choice (this path will be referred to as [file_path] throughout the guide).

3. Write the image on the SD card.

Note The instructions you use to restore memory on your MicroSD card depends on your computer's

operating system. The following instructions explain how to restore your MicroSD card using Linux and

Windows OS.

Create a bootable microSD card using the Linux OS

To create a bootable MicroSD card using a Linux OS:

1. Insert the MicroSD card into your computer and check the node Linux assigns to it (/dev/

[sdcard]) using dmesg.

dmesg

[1413652.901270] sd 41:0:0:0: [sdc] 7744512 512-byte logical

blocks: (3.96 GB/3.69 GiB)

[1413652.903140] sd 41:0:0:0: [sdc] No Caching mode page

present

[1413652.903144] sd 41:0:0:0: [sdc] Assuming drive cache:

write through

[1413652.905638] sd 41:0:0:0: [sdc] No Caching mode page

present

[1413652.905642] sd 41:0:0:0: [sdc] Assuming drive cache:

write through

[1413652.915154] sdc: sdc1

Do not mount any partitions the card might contain (or unmount any partition if

automatically mounted) as you will be writing to the entire block device.

2. Write the image file to the MicroSD card with this command. Note that you must substitue

[file_path/filename.sdcard] with the path and filename to the SD card image. You also need to

Andere Handbücher für ConnectCore 6

Inhaltsverzeichnis

Andere Digi Steuereinheit Handbücher

Digi

Digi Digi One EM Anwendungshandbuch

Digi

Digi XBee Bedienungsanleitung

Digi

Digi Digi XBee SX Bedienungsanleitung

Digi

Digi ConnectCore 6UL Kurzanleitung

Digi

Digi Connect ME Anwendungshandbuch

Digi

Digi XBee-PRO XSC Bedienungsanleitung

Digi

Digi Connect ME Anwendungshandbuch

Digi

Digi XBee ZigBee S2C Bedienungsanleitung

Digi

Digi XBee 3 ZigBee Bedienungsanleitung

Digi

Digi XTend vB DigiMesh Bedienungsanleitung

Digi

Digi XBee XTC Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi Digi Connect EM DC-EM02T-JT Anwendungshandbuch

Digi

Digi ConnectCore 7U Anwendungshandbuch

Digi

Digi XBee-PRO 900HP Bedienungsanleitung

Digi

Digi XBEE PRO S2C Bedienungsanleitung

Digi

Digi XBee ZNet 2.5 Bedienungsanleitung

Digi

Digi XBee ZigBee S2D Bedienungsanleitung

Digi

Digi ConnectCore 8X Kurzanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi ConnectCore 8X Kurzanleitung

Digi

Digi XBee SX 868 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung