Digi TransPort WR11 Bedienungsanleitung

Package Contents

Quick Start Guide

TransPort WR11

Connect Antenna and Power Supply

TransPort WR11 Antenna

If any item is missing or damaged, please contact your supplier. Also, make a record of any damage that may have occurred during

shipping and report it to the supplier.

Depending on model and configuration, the package will also contain additional cables/antennas as appropriate.

Power Supply

DIGI TRANSPORT WR11

Power

Signal

Service

Mounting Tips!

The Digi TransPort WR11 should be positioned on a flat, level surface. The unit is designed for indoor use and should be mounted in a location

with adequate ventilation. Also, do not expose the unit to extreme heat or cold, strong magnetic fields, or liquids.

DIGI TRANSPORT WR11

Power

Signal

Service

DIGI TRANSPORT WR11

Service

Signal

Power

EVDO Models

DIGI TRANSPORT WR11

Service

Signal

Power

Connect Antenna: Connect the cellular antenna to the

connector (SMA Female) on the unit.

Connect Power Supply: Connect the plug end of the 5 volt power

supply to the power connector on the unit, and plug the other end into

a wall outlet.

Connect an Ethernet Cable: Connect one end of the cable to the

ethernet port on the unit and the other end an ethernet port on a PC.

Note: The ethernet cable required for the connection is customer supplied.

The cable is not included in the package.

Configure the Unit

Insert power supply end fully and

rotate clockwise to engage

and lock.

Ensure that the DHCP client is enabled on the PC.

90001388_C

To use your Digi TransPort WR11, you must first activate the device with your carrier(Verizon or Sprint).

This process involves supplying them with the MEID number from your device which is printed

on the label.

To complete configuration of your device, refer to the Users Guide and Application Notes provided on the Digi support site

(www.digi.com/support).

What’s Next?

Verify Your Connection

DIGI TRANSPORT WR11

Service

Signal

Power

Connect to the Web Interface: Open a web browser (such as Firefox, Internet Explorer, Chrome) on your PC and navigate to

http://192.168.1.1. If successful, you will be prompted to enter a username and password. The default username is username, and

the default password is password.

CDMA Provisioning: Sprint devices start the provisioning process on startup and no intervention is necessary, skip to the next section.

Note that the provisioning process may take several minutes to complete.

For Verizon devices once the device is activated with the carrier, go to Configuration - Interfaces > Mobile > CDMA Provisioning and

click the Start button under Automatic Provisioning as shown in the following image. The process will take one to two minutes

to complete.

Click Reboot when Provisioning is complete.

Configure the Unit (Continued)

Note: When the signal strength is less than -101, the Signal-Strength LED is off. Place the device in a location where it gets a better signal.

To verify that the device is connected to the cellular network, check to see that the service LED is blinking as shown in the table.

You will also see the mobile IP address on the home page.

After you have logged in, it is strongly recommended that you immediately change the default username and password.

Andere Handbücher für TransPort WR11

Inhaltsverzeichnis

Andere Digi Netzwerk-Router Handbücher

Digi

Digi 6310-DX Bedienungsanleitung

Digi

Digi Transport DR64-H Bedienungsanleitung

Digi

Digi WR44v1 Bedienungsanleitung

Digi

Digi Connect EZ 4 Bedienungsanleitung

Digi

Digi HR4420i Bedienungsanleitung

Digi

Digi Connect WAN Sync Edge 10 Bedienungsanleitung

Digi

Digi TX64 Bedienungsanleitung

Digi

Digi XPressWireless Bedienungsanleitung

Digi

Digi TX54 Bedienungsanleitung

Digi

Digi TransPort WR11 Bedienungsanleitung

Digi

Digi Connect IT 4 Bedienungsanleitung

Digi

Digi TransPort Bedienungsanleitung

Digi

Digi Digi TransPort WR Bedienungsanleitung

Digi

Digi TransPort WR11 XT Bedienungsanleitung

Digi

Digi IX30 Bedienungsanleitung

Digi

Digi EX40 Bedienungsanleitung

Digi

Digi 6330-MX Bedienungsanleitung

Digi

Digi TransPort WR21 Montage- und Bedienungsanleitung

Digi

Digi ConnectPort X4 Bedienungsanleitung

Digi

Digi XPress Bedienungsanleitung

Digi

Digi Connect Series Benutzerhandbuch

Digi

Digi TransPort WR11 XT Bedienungsanleitung

Digi

Digi 34 Montage- und Bedienungsanleitung

Digi

Digi WR41v1 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung