Digi TX54 Bedienungsanleitung

TX54

User Guide

Firmware version 22.2

Revision history—90002357

Revision Date Description

FMarch 2021 Release of Digi TX54 firmware version 21.2:

nEnhancements to the location service:

lThe ability to define a static latitude and longitude

as a location for the device.

lReporting location information as health metrics to

Digi Remote Manager.

lGeo-fencing: Allow you to define one or more

circular or polygonal geo-fence areas and then

perform a set of actions when the device enters or

leaves that area.

lPython support for location information through

the digidevice.location python module.

nCellular modem carrier scanning and locking:

lNew modem scan CLI command for listing available

carriers for the current modem and SIM.

lManual carrier selection option to allow you to lock

the SIM to a specific carrier.

nEnhanced serial support:

lCertificate management control for TCP and

autoconnect serial port setups.

lAutoconnect.

nEnhanced Wi-Fi support:

lSupport 5GHz DFS Wi-Fi channels in client mode.

Only available for devices with 5GHz Wi-Fi radio

support.

lAdded 5GHz frequencies to the list of channels that

can be scanned for client-mode Wi-Fi background

scanning.

nLocal RESTAPI for automated configuration of the

device.

nSupport for remote CLI commands through Digi

Remote Manager.

nSupport for automatically checking for device and

modem firmware updates.

GJune 2021 Release of Digi TX54 firmware version 21.5:

nWi-Fi enhancements:

lAdded support for WPA3 Wi-Fi encryption:

TX54 User Guide 2

Revision Date Description

oWPA2/WPA3 Personal

oWPA3 Enhanced Open

oWPA3 Personal

lAdded support for WPA and WPA/WPA2 mised

mode with TKIP.

nCellular enhancements:

lAdded support for modem firmware update to the

Admin CLI.

lAdded support for over-the-air (OTA) modem

firmware update to check, list, and update to new

modem firmware from the Digi firmware server.

lAdded the ability to scan for cellular carriers on the

Modem status page and the ability select a

particular PLMN/network to use.

nAdded commands for over-the-air (OTA) system

firmware update to check, list, and update to new

firmware from the Digi firmware server.

nAdded a show dns command to the Admin CLI to

display active DNS servers and their associated

interface.

nAdded a show ntp command to the Admin CLI to

display the status of the NTP service.

nExpanded Port forwarding option to support a range of

ports, including one-to-one and many-to-one port

mappings.

nAdded options to control packet filtering for the

network analyzer.

nVPN enhancements:

lIPsec enhancements:

oAdded support for multiple remote endpoints

and the ability to use round-robin or to randomly

select an endpoint to establish a tunnel to.

oAdded configurable options to control IKE

transmit interval, tunnel retry interval, and

tunnel retry timeout.

lLDAP enhancements:

oAdded a login attribute to provide the ability to

match the attribute set on an Active Directory

server.

nSureLink enhancements

lAdded the ability to configure how many times a

SureLink test must run, and must fail, before the

TX54 User Guide 3

Revision Date Description

interface is restarted or the device is rebooted.

lAdded the ability to configure how many times a

SureLink test must pass before an interface is

considered to be working.

lAdded the ability to test another interface's status.

nSNMPv2 supported added.

nUpdated python to version 3.6.13.

nAdded the default digi.device local domain.

HSeptember 2021 Release of Digi TX54 firmware version 21.8:

nAdded LXC container support for running localized

containers on the device.

nAdded support for maintenance windows triggers to

control when a device is available for Digi Remote

Manager maintenance activity.

nWi-Fi enhancements:

lRemoved requirement to set a Wi-Fi SSID and

passphrase to initially configure the device.

lAdded support for 40Mhz channel bandwidth on

2.4GHz.

nVPNenhancements:

lAdded support for L2TPv3 tunneling.

lNew option to enable, disable, or force IPsec IKE

fragmentation.

nImproved options for creating a custom default

configuration:

lsystem backup CLI commands for generating a

custom default config file based on the active

config settings on the device.

lNew section on the File System page of the Web UI

for loading a configuration backup file as the

custom default config

lNew persistent files folder accessible through Digi

Remote Manager where users can upload a

configuration backup.

lAdded ability to clear a custom default

configuration by performing by pressing the RESET

button, waiting for the device to reboot, then

pressing the RESET again.

nAdded ability to override or edit SSH server options.

nAdded options for filtering Wi-Fi scanner results based

off of MAC addresses or RSSI signal strength.

TX54 User Guide 4

Revision Date Description

nAdded options for sending local device event logs to

Digi Remote Manager.

nNew system time CLI command for manually setting

the local date and time.

nNew firewall packet filter options to allow/deny packets

based off of a range of source or destination MAC

addresses.

nNew monitoring metrics upload CLI command to send

on-demand health metrics to Digi Remote Manager.

nAdded support for the configuration of custom scripts

that will be run manually, and a new system script

start CLI command to run manual scripts.

nNew "Find me" feature that flashes cellular-related

LEDs to help locate the device onsite and a new system

find-me command.

nAdded datapoint.upload_multiple function to

digidevice python module for uploading multiple

datapoints to DigiRM at once.

nAdded clear dhcp-lease command to remove all

dynamic DHCP leases or certain DHCP leases based on

MAC address or IP address.

nAdded speedtest command for performing on-demand

iPerf or nuttcp speedtests.

nLocal users are now required to be assigned to an

authentication group.

nNew Network → Advanced → Sequential DHCP address

allocation configuration setting for controlling if DHCP

addresses are assigned sequentially or randomly

(disabled by default).

nAdded ability to control if DHCP addresses are assigned

sequentially or randomly (disabled by default).

nAdded 802.1x port-based network access control,

configurable per network interface.

JDecember 2021 Release of Digi TX54 firmware version 21.11:

nConfiguration option to allow for automatic update of

new firmware (disabled by default).

nUser authentication enhancements:

lAdded TACACS+ command authorization and

accounting for Admin CLI commands.

lAdded a new username alias to provide an

alternate username that allows for special

characters in the username.

TX54 User Guide 5

Revision Date Description

nWi-Fi enhancements:

lPKI certificate-based authentication for

WPA2/WPA3 Enterprise Wi-Fi client connections,

including options for SCEP client integration for

automatic certificate generation.

lImproved Wi-Fi scanning tool on the Status page to

automatically setup the underlying basic client-

mode settings so the device can scan for nearby

APs without requiring the user to first configure the

client-mode settings.

nVPNenhancements:

lAdded support for PPP-over-L2TP tunnels.

lChanged default IPsec IKE DH group to 14 for

enhanced compatibility with industry standard

settings.

nLocation services enhancements:

lNew option for Location service to specify the

talker ID used in NMEA mesage strings.

lInclude the mode indicator field in NMEA messages

constructed when a GPS fix isn’t obtained.

nSureLink enhancments:

lAdded new settings under cellular Surelink options

to have the device reset the cellular modem if a

specified number of Surelink tests fail

lAdded show surelink Admin CLI command.

nSerial port enhancements:

lNew option to add and configure an external USB-

to-serial adapter.

lDisable serial history in remote access mode by

default.

nSupport for sending analog and digial I/O health

metrics to Digi Remote Manager.

nAdded show containers Admin CLI command.

KMarch 2022 Release of Digi TX54 firmware version 22.2:

nVPNenhancements:

lRenamed VPN >IPsec >Tunnels >Policies >Local

network setting to Local traffic selector and

added Remote traffic selector.

lAdded a Dynamic option to the Local traffic

selector to configuration of a local network by

protocol and/or port instead of a network address

TX54 User Guide 6

Revision Date Description

range.

lAdded Protocol and Port match criteria for Local

traffic selector and Remote traffic selector.

lAdded VPN >IPsec >Advanced >Debug level to

specify the logging verbosity of IPsec messages in

the device system logs.

nAdded the ability to use the on-board GNSS module as

a time source.

nEnhancements to communications with Digi Remote

Manager:

lEnhanced security for communications with Digi

Remote Manager by using client-side certificates.

lThe default URL for the device's Remote Manager

connection is now edp12.devicecloud.com. This

URL is required to utilize the client-side certificate

support.

nNew Switch SIM SureLink action for WWAN interfaces,

which allows SureLink to be configured to switch to the

alternate SIM if the modem is connected but SureLink

test are failing.

lNew Switch SIM fail count option to determine

how many SureLink failures are required prior to

switching to the alternate SIM.

nNew Socket ID string option to send the configured

text to the remote server(s) when a TCP socket

connection is opened to the serial port.

nNew system power ignition off_delay CLI command

for manually adjusting the power off delay from

ignition sensors without having to adjust the

configuration settings of the Digi device

nNew cat Admin CLI command for displaying file

contents.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States

and other countries worldwide. All other trademarks mentioned in this document are the property of

their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

TX54 User Guide 7

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

[email protected]

Include the document title and part number (TX54 User Guide, 90002357 H) in the subject line of your

email.

TX54 User Guide 8

Contents

Revision history—90002357 2

What's new in Digi TX54 version 22.2

Digi TX54 Quick Start

Step 1: Connect your device 23

Step 2: Connect DC power 24

Step 3: Set up access to Digi Remote Manager 25

Step 4: Register your device 25

Step 5: Complete setup 25

Step 6: Configure cellular APN 25

Digi TX54 hardware reference

Digi TX54 features and specifications 27

TX54 accessories 27

TX54 front view 27

TX54 LEDs 28

Single cellular models 28

Dual cellular models 28

Dual Wi-Fi models 28

Power 28

GNSS Service 29

Wi-Fi Service (single Wi-Fi models) 29

Wi-Fi1 Service (dual Wi-Fi models) 29

Wi-Fi2 Service (dual Wi-Fi models) 29

WWAN Signal 29

WWAN Service 29

Ethernet 1-4 Link and Activity (on rear panel) 29

Power sensor and button behavior 30

TX54 back view 30

Digi TX54 serial connector pinout 30

QR code definition 31

Hardware setup

Install SIM cards 33

Apply Dielectric Grease over SIMContacts 33

Tips for improving cellular signal strength 34

TX54 User Guide 9

TX54 User Guide 10

Connect data cables 34

Connect antennas 34

Mount the TX54 to a mounting surface 34

Connect power 35

Mount and ground chassis 35

TX54 electrical rating 36

TX54 power connector 37

Battery power management 37

Configuration and management

Review TX54 default settings 39

Local WebUI 39

Digi Remote Manager 39

Default interface configuration 39

Other default configuration settings 43

Change the default password for the admin user 43

Reset default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points 45

Configuration methods 47

Using Digi Remote Manager 49

Access Digi Remote Manager 49

Using the web interface 49

Log out of the web interface 50

Use the local RESTAPI to configure the TX54 device 50

Use the GETmethod to return device configuration information 50

Use the POST method to modify device configuration parameters and list arrays 52

Use the DELETE method to remove items from a list array 53

Using the command line 55

Access the command line interface 55

Exit the command line interface 56

Interfaces

Wide Area Networks (WANs) 58

Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs) 60

Configure WAN/WWAN priority and default route metrics 60

WAN/WWAN failover 63

Configure SureLink active recovery to detect WAN/WWAN failures 64

Configure the device to reboot when a failure is detected 75

Disable SureLink 83

Example: Use a ping test for WAN failover from Ethernet to cellular 87

Using Ethernet devices in a WAN 91

Using cellular modems in a Wireless WAN (WWAN) 92

Configure a Wide Area Network (WAN) 116

Configure a Wireless Wide Area Network (WWAN) 125

Show WAN and WWAN status and statistics 135

Delete a WAN or WWAN 137

Default outbound WAN/WWAN ports 139

Local Area Networks (LANs) 140

About Local Area Networks (LANs) 141

Configure a LAN 141

Example: Configure two LANs 149

Show LAN status and statistics 159

Andere Handbücher für TX54

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digi Netzwerk-Router Handbücher

Digi

Digi TransPort WR31 Montageanleitung

Digi

Digi Transport DR64-H Bedienungsanleitung

Digi

Digi ConnectPort X4 IA Bedienungsanleitung

Digi

Digi 6330-MX Bedienungsanleitung

Digi

Digi Connect IT 4 Bedienungsanleitung

Digi

Digi One TS W Bedienungsanleitung

Digi

Digi IX10 Bedienungsanleitung

Digi

Digi TransPort LR54 Bedienungsanleitung

Digi

Digi IX20-WAG4 Bedienungsanleitung

Digi

Digi HR4420i Bedienungsanleitung

Digi

Digi TransPort WR11 XT Bedienungsanleitung

Digi

Digi 6330-MX Bedienungsanleitung

Digi

Digi XPress Bedienungsanleitung

Digi

Digi Connect WAN Sync Edge 10 Bedienungsanleitung

Digi

Digi 34 Montage- und Bedienungsanleitung

Digi

Digi XPressWireless Bedienungsanleitung

Digi

Digi TX64 Bedienungsanleitung

Digi

Digi IR4420 Bedienungsanleitung

Digi

Digi TransPort WR11 Bedienungsanleitung

Digi

Digi TransPort WR41 Bedienungsanleitung

Digi

Digi TransPort WR41 Bedienungsanleitung

Digi

Digi 6350-SR Bedienungsanleitung

Digi

Digi IX10-00G4 Bedienungsanleitung

Digi

Digi ConnectPort WAN GPS Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung