Digimerge DPZ36WO23 Bedienungsanleitung

www.digimerge.com

Instruction Manual

English Version 1.0

DPZ36WO23 / DPZ36WO30

PTZ Camera

These servicing instructions are for use by qualiﬁed service personnel only.

To reduce the risk of electric shock do not perform any servicing other than

that contained in the operating instructions unless you are qualiﬁed to do so.

In USA and Canada, Use Class 2 Power Supply Only

CAUTION

Contents

Caution 4

IMPORTANT SAFETY INSTRUCTIONS 6

1. Overview 7

guration 8

1.3 Termination Settings 8

2. Installation and Connection 9

2.1 Package Contents 9

2.2 Surface Mounting 10

2.3 Mounting Accessories 10

2.4 Connection Interface and Wiring Cables 11

2.5 Setting Dome Camera 12

3. Program and Operation 13

OSD Menu Structure 13

3.1 Getting Started 16

3.2 Main Menu 16

3.3 System Setup Menu 17

3.4 Display Setup Menu 19

3.5 Camera Setup Menu 22

3.6 Dome Motion Menu 25

3.7 Preset Setup 27

3.8 Pattern Setup 28

3.9 Tour Setup 29

3.10 Auto Scan Setup 30

3.11 Alarm Setup 31

4. Troubleshooting 32

5. Speci cations 33

6. Dimensions 35

Appendix. Pelco Protocol Function List 36

1.1 Features

Caution

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference

at his own expense.

WARNING

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Caution cations in construction of this device which are not expressly

approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

CAUTION

1. A regulated AC24V 2.5A power supply is recommended for use with this

camera. Use of an unregulated power supply can cause damage to the camera

and voids the warranty.

2. It is recommended that the camera is used with a monitor that has a CCTV quality

75 video impedance level. If your monitor is switched to high impedance,

please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal

components. Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or re ective light, which may

cause smear on the picture and possibly damage the CCD.

5. Do not remove the serial sticker for the warranty service.

Caution

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with

separate collection systems)

This marking shown on the product or its literature, indicate that it should not be

disposed with other household wastes at the end of its working life. To prevent

possible harm to the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and recycle it responsibly

to promote the sustainable reuse of material resources.

This product should not be mixed with other commercial wastes purchased this

product, or their local government of ce, for details of where and how they can take

item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of

the purchase contract.

Household users should contact either the retailer where they for disposal.

This symbol is intended to alert the user to the presence of un-

insulated “dangerous voltage” within the product’s enclosure

cient magnitude to constitute a risk of electric

shock to persons.

This symbol is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in

the literature accompanying the appliance

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers,

ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

ed by the manufacturer.

ed by the

manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long

periods of time.

ed service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

1. Overview

1.1 Features

- Autofocus, High Resolution Integrated Color Camera

- WDR (Wide Dynamic Range)

- Day & Night (Auto/BW/Color)

- Pan 360°Endless Rotation

- Tilt 180°Vector scan available

- 210 Preset Positions (except Short-cut command)

- 8 Auto Scan

- 8 Pattern

- 8 Tours consist of Presets, Patterns and Scans

- 4 Alarm Input (Off/NC/NO) and 1 Alarm Output (Off/NC/NO)

- User programmable setting

(Preset, Auto Scan, Pattern, Tour, Home Function, Alarm Action, etc)

- Programmable PTZ Speed: Proportional to Zoom ratio, changeable preset speed

- Multi-language OSD Support

- Private Mask Zone Support

- Standard protocol including Pelco-D/P

- Up to 255 Camera ID’s

- RS-485 Receiver

- AC 24V Only

- IP Rating: IP66 (Weatherproof)

DPZ36WO23:

- 600 TVL Resolution

DPZ36WO30:

- 700 TVL Resolution

- 300X Zoom (30X Optical, 10X Digital)

- 230X Zoom (23X Optical, 10X Digital)

Common Features:

1. Overview

guration

1.3 Termination Settings

MULTI PLEXER

2. Installation and Connection

2.1 Package Contents

Camera

Mounting Template

Manual

Screws / Plastic anchors / Allen Key / O-Ring

Plastic anchors

(6x30 - 4ea)

Allen-Key

Screws

(#8(Ø4.2)x32 - 4ea)

O-Ring(8ea)

Screws(M4x12-4ea)

2. Installation and Connection

2.2 Surface Mounting

1 - Select a location that can support the weight

of the camera.

2 - Use the mounting template to create holes for

the mounting screws and cable. Insert the

anchors(4).

3 - Run the cables through the cable hole and

connect the cables as shown in

{2.4.5 Connection Diagram} on page 11.

Caution: Do not connect power to the

camera before completing the entire

installation.

4 - Remove the dome cover. Remove the

internal foam packaging. To prevent scratches,

do not remove the film on the outside of the

dome cover before completing the installation.

5 - Firmly attach the Camera Base to the surface

using the mounting screws(4) with o-rings

attached.

Caution: Make sure the o-rings are

attached to the mounting screws and

torx screws before mounting to provide

a weatherproof seal.

6 - If necessary, use the internal Dip Switches

to set the camera ID and protocol according

to {2.5 Setting Dome Camera} on page 12.

7 - Attach the Dome Cover to the Camera Base

using the torx screws(3) with o-rings attached.

2.3 Mounting Accessories

MNTZ36C Ceiling Mount

MNTZ36P Pole Adapter

(Requires MNTZ36W)

MNTZ36R Corner Adapter

(Requires MNTZ36W)

MNTZ36PP Parapet Mount

(Special Order)

MNTZ36W Wall Mount

Mounting

Template

Anchors(4)

Mounting

Screws(4)

Torx

Screws(3)

O-Rings(4)

O-Rings(3)

Camera

Base

Dome

Cover

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digimerge Sicherheitskamera Handbücher

Digimerge

Digimerge DPZ16TO27 Bedienungsanleitung

Digimerge

Digimerge DPD23D Bedienungsanleitung

Digimerge

Digimerge DCS100033 Bedienungsanleitung

Digimerge

Digimerge DPV14D Bedienungsanleitung

Digimerge

Digimerge DPV24DL Bedienungsanleitung

Digimerge

Digimerge DNZ9320W Bedienungsanleitung

Digimerge

Digimerge DND7220 Series Bedienungsanleitung

Digimerge

Digimerge DCB13TL Bedienungsanleitung

Digimerge

Digimerge DCV54DL Bedienungsanleitung

Digimerge

Digimerge DPV24D Bedienungsanleitung

Digimerge

Digimerge DPV24D Bedienungsanleitung

Digimerge

Digimerge DPV24D Bedienungsanleitung

Digimerge

Digimerge DNP5320E Bedienungsanleitung

Digimerge

Digimerge DCV13TL Bedienungsanleitung

Digimerge

Digimerge DNP5220E Bedienungsanleitung

Digimerge

Digimerge DCV24DL Bedienungsanleitung

Digimerge

Digimerge Flir DBV44TL Bedienungsanleitung

Digimerge

Digimerge DPV14D Bedienungsanleitung

Digimerge

Digimerge DPV34WL Handbuch

Digimerge

Digimerge DPD14T Bedienungsanleitung

Digimerge

Digimerge DCV23DL Bedienungsanleitung

Digimerge

Digimerge DCBHR1535 Bedienungsanleitung

Digimerge

Digimerge DPV24DL Bedienungsanleitung

Digimerge

Digimerge DCBHR1535 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung