Digital Equipment DECpc AXP 150 Bedienungsanleitung

DECpcAXP150and

DEC2000Model300AXP

UserInformation

Order Number: EK-A0634-OM.001

July 1993

This guide describes how to operate the DECpc AXP 150 and DEC 2000

Model 300 AXP systems.

Revision Information: This is a new manual.

Digital Equipment Corporation

Maynard, Massachusetts

First Printing, July 1993

Possession, use, or copying of the software described in this documentation is

authorized only pursuant to a valid written license from Digital, an authorized,

sublicensor, or the identiﬁed licensor.

While Digital believes the information included in this publication is correct as

of the date of publication, it is subject to change without notice.

Digital Equipment Corporation makes no representations that the

interconnection of its products in the manner described in this document

will not infringe existing or future patent rights, nor do the descriptions

contained in this document imply the granting of licenses to make, use, or sell

equipment or software in accordance with the description.

The postpaid Reader’s Comments forms at the end of this document request

your critical evaluation to assist in preparing future documentation.

The following are trademarks of Digital Equipment Corporation: Alpha

AXP, AXP, DEC, DECchip 21064, DECconnect, DECpc, Digital, OpenVMS,

RRD42, RX, RZ, ThinWire, VAX DOCUMENT, the Alpha AXP logo, and the

DIGITAL logo.

OSF and OSF/1 are registered trademarks of the Open Software Foundation,

Inc.

IBM and PS/2 are registered trademarks of International Business Machines

Corporation.

Microsoft is a registered trademark and Windows NT is a trademark of

Microsoft Corporation.

Centronics is a trademark of Centronics Data Computer Corporation.

Xerox is a registered trademark of Xerox Corporation.

All other trademarks and registered trademarks are the property of their

respective holders.

This document was prepared using VAX DOCUMENT, Version 2.1.

FCC Notice: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

Any changes or modiﬁcations made to this equipment may void the user’s

authority to operate this equipment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

To comply with the FCC rules part 15B for a class B computing device,

use only properly shielded interface cables for the systems described in this

document.

VCCI Class 2 ITE Notice:

This document was prepared using VAX DOCUMENT, Version 2.1.

Für Bundesrepublik Deutschland

For Federal Republic of Germany

Pour la République féderale d’Allemagne

BESCHEINIGUNG DES HERSTELLERS/IMPORTEURS

Dieses Gerät ist in Übereinstimmung mit den Bestimmungen der BMPT

Vfg.243/1991 und Vfg.46/1992 in Verbindung mit EN55022:1987 (DIN VDE

0878-3:11.89), oder Vfg.1046/1984 mit Vfg. 483/1986, funkentstört. Es trägt als

Nachweis der EMV-Konformität entweder eine Konformitätskennzeichnung oder

das freiwillige VDE-Funkschutzzeichen.

Der vorschriftsmäßige Betrieb mancher Geräte (z.B. Meßsender) kann

allerdings gewissen Einschränkungen unterliegen. Beachten Sie deshalb

die unten aufgeführten Hinweise.

Dem Bundesamt für Zulassungen in der Telekommunikation (BZT) wurde

das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur

Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.

Betreiberhinweis

Wir sind verpﬂichtet, Sie auf folgende Fakten hinzuweisen (BMPT-

Amtsblattverfügung 243/91 bzw. 1046/84 §2, Abschnitt 5):

Dieses Gerät wurde funktechnisch sorgfältig entstört und geprüft. Wird dieses

Gerät innerhalb einer Anlage zusammen mit anderen Geräten betrieben, muß

bei Inanspruchnahme der "Allgemeinen Betriebsgenehmigung" nach BMPT-

AmtsblVfg. 243/91 bzw. 1046/84 die gesamte Anlage den unter §2, Abschnitt 1,

genannten Voraussetzungen entsprechen.

Externe Datenkabel

Sollte ein Austausch der von Digital speziﬁerten Datenkabel nötig werden,

muß der Betreiber für eine einwandfreie Funkentstörung sicherstellen, daß

Austauschkabel im Aufbau und Abschirmqualität dem Digital Originalkabel

entsprechen.

This document was prepared using VAX DOCUMENT, Version 2.1.

Contents

Preface ..................................................... xv

1 System Description

Introduction . . . ................................... 1–1

In This Chapter ................................... 1–1

Operating System Support . . . ........................... 1–2

Summary ........................................ 1–2

System Architecture................................ 1–2

Supported Operating Systems ........................ 1–2

Visual Display Unit ................................ 1–2

Client/Server Use . . ................................... 1–3

Summary ........................................ 1–3

Client Systems . ................................... 1–3

Server Systems ................................... 1–3

System Features . . ................................... 1–4

Summary ........................................ 1–4

System Features .................................. 1–4

Front Panel Controls and Indicators . . . ................... 1–6

Summary ........................................ 1–6

Controls and Indicators . . ........................... 1–6

Front Panel Illustration . . ........................... 1–7

Back Panel Ports and Connectors ........................ 1–8

Summary ........................................ 1–8

Ports and Connectors ............................... 1–8

Ports and Connectors Illustration . . ................... 1–9

Back Panel Controls and Indicators ....................... 1–10

Summary ........................................ 1–10

Controls and Indicators . . ........................... 1–10

Controls and Indicators Illustration . ................... 1–11

Internal Options. . . ................................... 1–12

Summary ........................................ 1–12

Storage Options ................................... 1–12

Ordering Information ............................... 1–12

Storage Options Illustration . . ........................ 1–13

Internal Options, continued ............................. 1–14

EISA and ISA Options .............................. 1–14

Ordering Information ............................... 1–14

EISA Option Illustration ............................ 1–15

Internal Options, continued ............................. 1–16

Memory Options. . . ................................ 1–16

Ordering Information ............................... 1–16

Memory Option Illustration . . ........................ 1–16

System Unit Key Information . . . ........................ 1–17

Summary ........................................ 1–17

Important Information .............................. 1–17

Recording the Key Number and Letter . ................ 1–17

Key Number and Letter Location...................... 1–17

2 Using the System

Introduction ...................................... 2–1

In This Chapter . . . ................................ 2–1

Choosing a Location for the System Unit . . . ................ 2–2

Summary ........................................ 2–2

Physical Orientation ............................... 2–2

Environmental Conditions . . . ........................ 2–2

Unsuitable Locations ............................... 2–3

Cable Considerations ............................... 2–3

Ergonomic Considerations .............................. 2–4

Summary ........................................ 2–4

Positioning System Components ...................... 2–4

Moving the System Unit ............................ 2–5

Positioning Illustration ............................. 2–5

Turning the System On or Off . . . ........................ 2–6

Summary ........................................ 2–6

Turning On the System ............................. 2–6

Turning Off the System ............................. 2–6

On/Off Switch Positions Illustration . . . ................ 2–7

OpenVMS and OSF/1 Console Power-Up Test Displays . ....... 2–8

Summary ........................................ 2–8

Power-Up Test Display Differences .................... 2–8

If the System Passes ............................... 2–8

If the System Fails. ................................ 2–8

Power-Up Test That Passes . . ........................ 2–9

Power-Up Test That Fails . . . ........................ 2–9

Windows NT Firmware Power-Up Test Displays . . . .......... 2–10

Summary ........................................ 2–10

Power-Up Test Display Differences . ................... 2–10

If the System Passes ............................... 2–10

If the System Fails................................. 2–10

Power-Up Test That Passes .......................... 2–11

Power-Up Test That Fails ........................... 2–11

Booting Windows NT .................................. 2–12

Summary ........................................ 2–12

Windows NT Factory Installed Software ................ 2–12

Booting Windows NT Automatically. ................... 2–12

Boot Selections . ................................... 2–12

Using the Boot Menu ............................... 2–12

Windows NT Boot Menu . ........................... 2–13

Windows NT Boot Selection Menu . . ................... 2–13

Booting OpenVMS . ................................... 2–14

Summary ........................................ 2–14

OpenVMS Factory Installed Software .................. 2–14

Booting OpenVMS Automatically . . . ................... 2–14

System Defaults ................................... 2–14

Booting OpenVMS ................................. 2–14

Booting OSF/1 ....................................... 2–15

Summary ........................................ 2–15

OSF/1 Factory Installed Software . . ................... 2–15

Booting OSF/1 Automatically ......................... 2–15

System Defaults ................................... 2–15

Booting OSF/1 . ................................... 2–15

3 Using CD-ROM and Diskette Drives

Introduction . . . ................................... 3–1

In This Chapter ................................... 3–1

RRD42 CD-ROM Drive Description ....................... 3–2

Summary ........................................ 3–2

Description ....................................... 3–2

Controls and LEDs................................. 3–2

If Errors Occur . ................................... 3–2

Controls and LEDs Illustration ....................... 3–3

Inserting a Compact Disc into a Caddy . ................... 3–4

Summary ........................................ 3–4

Insertion Procedure ................................ 3–4

Compact Disc and Caddy Illustration .................. 3–5

Inserting a Caddy into the RRD42 CD-ROM Drive . .......... 3–6

vii

Summary ........................................ 3–6

Caddy Insertion Procedure . . . ........................ 3–6

Caddy Insertion Illustration . ........................ 3–7

Removing a Caddy from the RRD42 CD-ROM Drive . . . ....... 3–8

Summary ........................................ 3–8

Caddy Removal Procedure . . . ........................ 3–8

Caddy Removal Illustration . . ........................ 3–9

RX26 Diskette Drive Description . ........................ 3–10

Summary ........................................ 3–10

Description ....................................... 3–10

Controls and LEDs. ................................ 3–10

If Errors Occur .................................... 3–10

Controls and LEDs Illustration ....................... 3–11

Using the RX26 Diskette Drive . . ........................ 3–12

Summary ........................................ 3–12

Important Information .............................. 3–12

Insertion Procedure ................................ 3–12

Removal Procedure ................................ 3–12

Insertion and Removal Illustration .................... 3–13

Cleaning the RX26 Diskette Drive Heads . . ................ 3–14

Summary ........................................ 3–14

Cleaning Procedure ................................ 3–14

When to Clean the Heads . . . ........................ 3–14

4 Using Tape Drives

Introduction ...................................... 4–1

In This Chapter . . . ................................ 4–1

TLZ06 Tape Drive Description . . . ........................ 4–2

Summary ........................................ 4–2

Description ....................................... 4–2

Controls and LEDs. ................................ 4–2

If Errors Occur .................................... 4–2

Controls and LEDs Illustration ....................... 4–3

Using the TLZ06 Tape Drive ............................ 4–4

Summary ........................................ 4–4

Insertion Procedure ................................ 4–4

Removal Procedure ................................ 4–4

Installation and Removal Illustration . . ................ 4–5

TZK10 Tape Drive Description . . . ........................ 4–6

Summary ........................................ 4–6

Description ....................................... 4–6

Controls and LEDs. ................................ 4–6

viii

If Errors Occur . ................................... 4–6

Controls and LEDs Illustration ....................... 4–7

Inserting a QIC Tape into a TZK10 Tape Drive .............. 4–8

Summary ........................................ 4–8

Insertion Procedure ................................ 4–8

Insertion Illustration ............................... 4–9

Removing a QIC Tape from a TZK10 Tape Drive . . . .......... 4–10

Summary ........................................ 4–10

Removal Procedure ................................ 4–10

Removal Illustration ............................... 4–11

Cleaning the Tape Drive Heads .......................... 4–12

Summary ........................................ 4–12

Cleaning Procedure ................................ 4–12

When to Clean the Heads ........................... 4–12

5 Removable Storage Media

Introduction . . . ................................... 5–1

In This Chapter ................................... 5–1

Quarter-Inch Cartridge (QIC) Tapes . . . ................... 5–2

Summary ........................................ 5–2

QIC Tape Compatibility . . ........................... 5–2

Handling and Storing QIC Tapes . . . ................... 5–3

Write-Protecting QIC Tapes . . ........................... 5–4

Summary ........................................ 5–4

Write-Protect Switch Positions ........................ 5–4

Write-Protect Switch Illustration . . . ................... 5–5

Cassette Tapes ....................................... 5–6

Summary ........................................ 5–6

Cassette Tape Compatibility ......................... 5–6

Handling and Storing Cassette Tapes .................. 5–7

Write-Protecting Cassette Tapes ......................... 5–8

Summary ........................................ 5–8

Important Information . . . ........................... 5–8

Write-Protect Switch Positions ........................ 5–8

Write-Protect Switch Illustration . . . ................... 5–9

Diskettes ........................................... 5–10

Summary ........................................ 5–10

Diskette Compatibility . . . ........................... 5–10

Handling and Storing Diskettes ....................... 5–10

Write-Protect Switch Positions ........................ 5–10

Write-Protect Switch Illustration . . . ................... 5–11

Compact Discs ....................................... 5–12

Summary ........................................ 5–12

Handling and Storing Compact Discs. . . ................ 5–12

Compact Disc and Caddy Illustration . . ................ 5–13

6 Connecting to External Ports

Introduction ...................................... 6–1

In This Chapter . . . ................................ 6–1

Before You Begin ..................................... 6–2

Summary ........................................ 6–2

Parallel and Serial Ports ............................ 6–2

Terminal Settings. . ................................ 6–2

External SCSI and Network Connections ............... 6–2

Other External Connections . . ........................ 6–2

Serial Port Terminal Settings............................ 6–3

Summary ........................................ 6–3

Terminal Settings. . ................................ 6–3

Connecting a Peripheral to a Serial Port . . . ................ 6–4

Summary ........................................ 6–4

Connection Procedure .............................. 6–4

Connection Illustration ............................. 6–5

Connecting a Peripheral to the Parallel Port ................ 6–6

Summary ........................................ 6–6

Connection Procedure .............................. 6–6

Connection Illustration ............................. 6–7

Connecting External SCSI Devices ....................... 6–8

Summary ........................................ 6–8

Deciding on External SCSI Devices .................... 6–8

External SCSI Drive Support . ........................ 6–8

Ordering SCSI Devices, Options, and Accessories . . ....... 6–8

Important Information .............................. 6–8

Specifying SCSI Cables ............................. 6–9

Connecting External SCSI Devices .................... 6–9

Connecting the System to a Network ...................... 6–10

Summary ........................................ 6–10

Network Option Board Support ....................... 6–10

Ordering Network Option Boards ..................... 6–10

Network Connection................................ 6–10

Andere Handbücher für DECpc AXP 150

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Equipment Desktop Handbücher

Digital Equipment

Digital Equipment VAXstation 4000 90 Bedienungs- und Montageanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 100 Technische Daten

Digital Equipment

Digital Equipment PDT 11/150 Bedienungsanleitung

Digital Equipment

Digital Equipment PDP-11/23-PLUS Benutzerhandbuch

Digital Equipment

Digital Equipment VT18X Bedienungsanleitung

Digital Equipment

Digital Equipment MicroVAX 3100 90 Leitfaden

Digital Equipment

Digital Equipment PMS 201 Technisches Datenblatt

Digital Equipment

Digital Equipment VAXft Systems 810 Bedienungs- und Montageanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 100 Kurzanleitung

Digital Equipment

Digital Equipment VAX 6000 Series Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 100A Service-Handbuch

Digital Equipment

Digital Equipment CELEBRIS Pentium PC Bedienungsanleitung

Digital Equipment

Digital Equipment VAXstation 2000 Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 300 Bedienungsanleitung

Digital Equipment

Digital Equipment DECstation 2100 Handbuch

Digital Equipment

Digital Equipment DECpc AXP 150 Handbuch

Digital Equipment

Digital Equipment DEC 3000 Bedienungsanleitung

Digital Equipment

Digital Equipment DEC 3000 700 AXP Kurzanleitung

Digital Equipment

Digital Equipment DECstation 5000 Model 200 Bedienungsanleitung

Digital Equipment

Digital Equipment DIGITAL Personal Workstation Installations- und Betriebshandbuch

Digital Equipment

Digital Equipment AlphaStation 600 Series Handbuch

Digital Equipment

Digital Equipment PDP-11/60 Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 300 Bedienungsanleitung

Digital Equipment

Digital Equipment STARION 20 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung