Digital Equipment DEC 3000 600 AXP Bedienungsanleitung

DEC3000Model600/600S/700AXP

OptionsGuide

Order Number: EK–SNDPL–OP. B01

Digital Equipment Corporation, Maynard, MA

First Printing, May 1994

Digital Equipment Corporation makes no representations that the use of its

products in the manner described in this publication will not infringe on

existing or future patent rights, nor do the descriptions contained in this

publication imply the granting of licenses to make, use, or sell equipment or

software in accordance with the description.

Possession, use, or copying of the software described in this publication

is authorized only pursuant to a valid written license from Digital or an

authorized sublicensor.

The following are trademarks of Digital Equipment Corporation: Alpha AXP,

AXP, Bookreader, DEC, DECaudio, DECchip, DECconnect, DEC GKS, DEC

PHIGS, DECsound, DECwindows, DECwindows Motif, DECwindows Mail,

DECwrite, DELNI, Digital, OpenVMS, OpenVMS AXP, RX26, ScriptPrinter,

ThinWire, TURBOchannel, ULTRIX, VAX, VAX DOCUMENT, VAXcluster,

VAXstation, the AXP logo, and the Digital logo.

Other trademarks are as follows:

CD is a trademark of Data General Corporation.

Open Software Foundation is a trademark of Open Software Foundation, Inc.

Motif, OSF, OSF/1, and OSF/Motif are registered trademarks of Open Software

Foundation, Inc.

ISDN is a registered trademark of Fujitsu Network Switching of America.

Mylar is a registered trademark of E.I. DuPont de Nemours & Company, Inc.

All other trademarks and registered trademarks are the property of their

respective holders.

FCC Notice: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference, in which case users

will be required to correct the interference at their own expense.

S2561

This document was prepared using VAX DOCUMENT Version 2.1.

Contents

Preface ..................................................... vii

1 Internal Options for Your System

Chapter Overview .......................................... 1–1

Internal Options and Their Positions in the System Unit . . .......... 1–3

2 Preparing Your System for Internal Options

Chapter Overview .......................................... 2–1

Backing Up Files and Shutting Down Software . ................... 2–2

Displaying the System Conﬁguration . ........................... 2–3

Shutting Down the Hardware ................................. 2–12

Removing the System Unit Cover . . . ........................... 2–14

Using the Antistatic Wrist Strap ............................... 2–15

3 Installing a Removable-Media Drive

Chapter Overview .......................................... 3–1

Installing a Removable-Media Drive . ........................... 3–2

Removing a Removable-Media Drive . ........................... 3–12

4 Installing a Fixed Disk Drive

Chapter Overview .......................................... 4–1

Installing a Fixed Disk Drive .................................. 4–2

Removing a Fixed Disk Drive ................................. 4–5

iii

5 Installing Memory Modules

Chapter Overview . . ........................................ 5–1

Memory Mother Board and Module Description.................... 5–2

Installing Memory Modules . . . ................................ 5–5

Removing Memory Modules . . . ................................ 5–15

6 TURBOchannel Options

Chapter Overview . . ........................................ 6–1

TURBOchannel Description . . . ................................ 6–2

Installing a TURBOchannel Option Module....................... 6–4

Removing a TURBOchannel Option Module ...................... 6–8

7 Restoring the System

Chapter Overview . . ........................................ 7–1

Saving the Wrist Strap ...................................... 7–2

Replacing the System Unit Cover .............................. 7–2

Restarting and Testing the System ............................. 7–4

Index

Figures

1–1 Internal Options You Can Add ........................ 1–3

1–2 Position of Fixed Disk and Removable-Media Drives ....... 1–4

1–3 Position of Memory Modules and TURBOchannel

Modules . ........................................ 1–5

2–1 Halt Button ...................................... 2–4

2–2 show device Display ................................ 2–5

2–3 show conﬁg Display ................................ 2–7

2–4 Conﬁguration Display with Error...................... 2–9

2–5 show memory Display .............................. 2–10

2–6 Turning Off the System Unit . ........................ 2–12

2–7 Removing the System Cover . ........................ 2–14

2–8 Using the Antistatic Wrist Strap ...................... 2–16

3–1 Position of the Removable-Media Drive . ................ 3–2

3–2 Removing the Drive Bracket . ........................ 3–4

3–3 Power Cable and Connectors . ........................ 3–5

3–4 SCSI Cable and Connectors .......................... 3–6

3–5 Connecting Cables to a Removable-Media Drive .......... 3–7

3–6 Diskette Drive Brackets and Cables. ................... 3–8

3–7 Attaching the Drive Bracket ......................... 3–9

3–8 Removing the Blank Bezel from the System Cover ........ 3–10

3–9 Replacing the Drive Bracket with the Drive Inside ........ 3–11

4–1 Position the Fixed Disk Drive ........................ 4–2

4–2 Connecting Cables to a Fixed Disk Drive ................ 4–3

4–3 Installing a Fixed Disk Drive ......................... 4–4

4–4 Removing a Fixed Disk Drive ........................ 4–5

5–1 Memory Mother Board . . . ........................... 5–2

5–2 Memory Modules .................................. 5–3

5–3 Position of Memory Modules ......................... 5–5

5–4 Loosening the Drive Plate ........................... 5–7

5–5 Removing the Drive Plate ........................... 5–8

5–6 Removing a Memory Mother Board . ................... 5–9

5–7 Installing Memory Modules .......................... 5–10

5–8 Installing a Memory Module ......................... 5–11

5–9 Reinstalling a Memory Mother Board .................. 5–12

5–10 Tilting the Drive Plate Back ......................... 5–13

5–11 Replacing the Drive Plate ........................... 5–14

5–12 Removing Memory Modules .......................... 5–15

5–13 Removing a Memory Module ......................... 5–16

6–1 TURBOchannel Option Widths ....................... 6–2

6–2 Location of TURBOchannel Options. ................... 6–4

6–3 TURBOchannel Slots and Connectors .................. 6–5

6–4 Removing a Metal Filler Plate ........................ 6–6

6–5 Installing a TURBOchannel Module ................... 6–7

6–6 Removing a TURBOchannel Module ................... 6–9

7–1 Replacing the System Cover.......................... 7–3

Tables

2–1 Elements of the show device Display . . . ................ 2–6

2–2 Elements of the show conﬁg Display . . . ................ 2–8

2–3 Elements of the show memory Display . ................ 2–11

5–1 Memory Capacity . . ................................ 5–4

Preface

About This

Guide This guide is intended for all users of the DEC 3000 Model

600/600S/700 AXP system unit. It describes how to install and

remove the following options:

• Removable-media drives

• Fixed disk drives

• Memory modules

• TURBOchannel option modules

Information for

Each Option This guide provides the following information for each internal

option:

• How to install and remove options

• How to test for successful installation

This guide also brieﬂy describes the external options.

Two Methods of

Adding Options There are two methods of adding options inside your system:

• Add the options yourself.

• Have a Digital service representative add them.

If you choose to add the options, note that installations typically

take about 15 minutes for each option, although some procedures

may take more or less time.

vii

What You

Should Know

Beforehand

The instructions in this guide assume that you are accustomed

to opening the system unit, disconnecting and connecting

internal cables, and using antistatic precautions. You should also

understand the following diagnostic test displays and concepts:

• System test messages

• Displays resulting from the

show config

show dev

, and

show

mem

console commands

• SCSI switch and jumper settings

(If you are not familiar with SCSI concepts, refer to Small

Computer System Interface: An Overview.)

CAUTION:

Possible

Module

Damage

Improper installation of an optional drive or module could lead

to damage and failure of that option. Your system warranty may

not cover such a failure.

IMPORTANT:

Software

Product

Descriptions

The Software Product Description (SPD) is the ofﬁcial deﬁning

document for software products licensed by Digital Equipment

Corporation, including third-party products licensed by Digital.

An SPD describes all important functional characteristics of the

software. The terms and conditions under which the corporation

sells and licenses its software products identify SPDs as the

documents that specify Digital’s obligation under software

warranty.

SPDs also describe a software product’s system environment,

and identify required and optional hardware and software. All

information contained in the SPD is valid in the international

marketplace.

For more information on the SPD for your operating system,

please contact your Digital sales representative.

viii

Organization This guide is organized into 7 chapters and an index.

Chapter Title Brief Description

1 Internal Options for

Your System Identiﬁcation and location of

internal options.

2 Preparing Your

System for Internal

Options

Preparation of your system

before adding internal

options.

3 Installing a

Removable-Media

Drive

Installation and removal

procedures.

4 Installing a Fixed

Disk Drive Installation and removal

procedures.

5 Memory Modules Description of memory

modules and installation

and removal procedures.

6 TURBOchannel

Options Description of TURBOchannel

modules and installation and

removal procedures.

7 Restoring the System Restoration and testing of

your system after internal

options are added.

Conventions in

This Guide The following conventions are used in this guide:

Convention Description

Return A key name is shown enclosed to indicate

that you press the named key on the

keyboard.

DEC OSF/1

operating system This name refers to the DEC OSF/1 AXP

operating system

OpenVMS

operating system This name refers to the OpenVMS AXP

operating system

Convention Description

show

A word in this typeface indicates a

command that you must enter from the

keyboard at the console prompt (>>>)

exactly as shown, for example:

show

config

WARNING: Warnings contain information to prevent

personal injury. Read these carefully.

CAUTION: Cautions provide information to prevent

damage to equipment or software. Read

these carefully.

Andere Handbücher für DEC 3000 600 AXP

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Equipment Desktop Handbücher

Digital Equipment

Digital Equipment VT420 Bedienungsanleitung

Digital Equipment

Digital Equipment MicroVAX 3100 88 Bedienungsanleitung

Digital Equipment

Digital Equipment STARION 200i Bedienungsanleitung

Digital Equipment

Digital Equipment VT420 Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 500A Bedienungsanleitung

Digital Equipment

Digital Equipment DECpc AXP 150 Bedienungsanleitung

Digital Equipment

Digital Equipment AlphaStation 600 Series Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 200 Bedienungsanleitung

Digital Equipment

Digital Equipment DEC 2000 500 AXP Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 100 Kurzanleitung

Digital Equipment

Digital Equipment PDT 11/150 Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 100 Service-Handbuch

Digital Equipment

Digital Equipment VAX 4000 Model 100 Technische Daten

Digital Equipment

Digital Equipment MicroVAX 3100 Model 30 Kurzanleitung

Digital Equipment

Digital Equipment AlphaStation 500 Series Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 Model 300 Bedienungsanleitung

Digital Equipment

Digital Equipment PMS 201 Technisches Datenblatt

Digital Equipment

Digital Equipment Starion Series Bedienungsanleitung

Digital Equipment

Digital Equipment DECpc AXP 150 Handbuch

Digital Equipment

Digital Equipment VAXstation 2000 Montage- und Wartungsanleitung

Digital Equipment

Digital Equipment VAX 6000 Series Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 500A Bedienungsanleitung

Digital Equipment

Digital Equipment DEC 3000 700 AXP Kurzanleitung

Digital Equipment

Digital Equipment Digital AlphaStation 400 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung