Digital Watchdog DWC-PV2M4T Bedienungsanleitung

MEGApix® Panoramic

2.1MP 180° Camera

DWC-PV2M4T

User’sManual Ver. 1.0 / 2015.04.21

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

tion

Warning

Precaution

This symbol indicates that dangerous voltage

consisting a risk of electric shock is present within

this unit.

Thisexclamation pointsymbolisintended to alert the

user to the presence of important operating and

maintenance (servicing)instructions intheliterature

accompanying theappliance.

WARNING

To prevent damage which may result in fire or electric shock

hazard, do not expose this appliance to rain or moisture.

WARNING

Be sure to use only the standard adapter that is specified in

thespecification sheet. Usinganyotheradaptercould cause

fire, electrical shock, or damage to the product.

2. Incorrectly connecting the power supply or replacing battery

may cause explosion, fire, electric shock, or damage to the

product.

Do not connect multiple cameras to a single adapter.

Exceeding the capacity may cause excessive heat generation

or fire.

4. Securely plug the power cord into the power receptacle.

Insecure connection may cause fire.

5. When installing the camera, fasten it securely and firmly.

A falling camera may cause personal injury.

6. Do not place conductive objects (e.g. screw drivers, coins,

metal items, etc.) or containers filled with water on top of

the camera. Doing so may cause personal injury due to fire,

electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty locations.

Doing so may cause fire or electric shock.

If any unusual smells or smoke come from the unit, stop

usingtheproduct.Immediatelydisconnectthepower

source

and contact the service center. Continued use in

such a

condition may cause fire or electric shock.

9. If this product fails to operate normally, contact the nearest

service center. Never disassemble or modify this product in

any way.

10. When cleaning, do not spray water directly onto parts of the

product. Doing so may cause fire or electric shock.

Precaution

Operating

•

Before using, make sure power supply and all other parts are

properly connected.

•

While operating, if any abnormal condition or malfunction

is observed, stop using the camera immediately and contact

your dealer.

Handling

•

Do not disassemble or tamper with parts inside the camera.

•

Do not drop the camera or subject it to shock or vibration as

this can damage the camera.

•

Clean the clear dome cover with extra care. Scratches and

dust can ruin the quality of the camera image.

Installation and Storage

•

Do not install the camera in areas of extreme temperature,

exceeding the allowed range.

•

Avoid installing in humid or dusty environments.

•

Avoid installing in places where radiation is present.

•

Avoid installing in places where there are strong magnetic

fields and electric signals.

•

Avoid installing in places where the camera would be subject

to strong vibrations.

•

Never expose the camera to rain or water.

RIS

ELE

TRI

NOT

CAUTION

TO REDUCE THE RISK

ELECTRIC SHOCK,

NOT

REMOVE

COVER

(OR

BACK) NO

USER

SERVICEABLE

PARTS

INSIDE.

REFER

SERVICING

TO QUALIFIED

SERVICE

PERSONNEL.

Important

Safety

Instructions

Read these instructions.

- All these safety and operating instructions should be read before the product is

installed or operated.

Keep these instructions. - The safety, operating and use instructions should be retained for future reference.

Heed all warnings.

- All warnings on the product and in the operating instructions should be adhered to.

Follow all instructions.

- All operating and use instructions should be followed.

Do not use this device near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet

basement; near a swimming pool; etc.

Clean only with dry cloth.

- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

- Slots and

openings in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it

from over-heating. The openings should never be blocked by placing the product on bed, sofa, rug or other similar

surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided and the manufacturer’s instructions have been adhered to.

Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)

that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Use only with cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13.

Unplug this apparatus during lightning storms or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

Disposal of OldAppliances

When this crossed-out wheel bin symbol is attached to a product it means the product is covered by

the European Directive 2002/96/EC.

All electrical and electronic products should be disposed of separately form the municipal waste

stream in accordance to laws designated by the government or the local authorities.

The correct disposal of your old appliance will help prevent potential negative consequences for

the environment and human health.

waste disposal service or the shop where you purchased the product.

This

equipment

has

been

tested

and

found

comply

with

the

limits

for

Class

digital

device,

pursuant

part 15 of

the

FCC

Rules.

These

limits

are

designed

provide

reasonable

protection

against

harmful

interference

when

the

equipment

operated

com

mercial

environment. This

equipment

generates,

uses,

and

can

radiate

radio

frequency

energy

and,

not

installed

and

used

accordance

with

the

struction

manual,

may

cause

harmful

interference

radio

communications.

Operation

this

equipment

a residential

area

likely

cause

harmful

inte

rference

which

case

the

user

will

required

correct

the

interference

his

own

expense.

oduc

tion

oduc

Acc

essor

ies

Please check that all the following accessories are included in the package.

Camera

Cables

Quick Manual

Screw & Plastic Anchor-4pcs

Manual CD

T-Wrench

(For Lens Tilting and

Rotation Control)

Template Sheet

Torx Wrench

(For SD CardCap)

Test Monitor Cable

Six anglesWrench

(For Hard Lock Set Screw)

Introduction

Product

Accessories

Mount Bracket

Panoramic

Lens

Tilt,Rotation

Control

OSD

Cap

Main

Body

Reset

Button

Cables

card

Slot

¾”

Pipe

Mounting

Hole

Hard

Lock

Set

Screw

nstallation

Disassemble

the

Camera

Before installing your camera, you have to read the following cautions.

Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise

When installing your camera, don’t allow any person to approach the installation site. If you have any

valuable things under the place, move them away.

Disassemble the camera

Loosen a small hard lock set screw on the Mount Bracket

using a small six angles wrench to disassemble the

camera from a Mount Bracket to for installation.

Warning:

Never Open the Dome.

Supplier will not take any responsibility on any

defectionfromanarbitrary disassembly.

Installation -

Mounting the Camera

Template Sheet

Disassemble the camera, See the section ‘Disassemble

the camera’ for details.

Using the template sheet, make the cabling holes on

the wall/ceiling.

Fix the Mount bracket on the wall/ceiling by

screw

provided.

Hook the Main body to Mount bracket with safetywire.

S Bring the cables into the Mount bracket through the hole.

Connect the cables respectively. See the section

‘Cabling’ for details.

After connecting the cables, main body to be assembled

into the Mount bracket.

Detach the protection film from the Dome Cover.

Adjust the panning angle of the camera and tighten

the hard lock set screw on the camera's Dome. See

next page for more information.

Safety

Wire

Mount

Bracket

Hole

Installation -

Adjusting the Camera's Pan and Tilt

Pull wires through and make all necessary

connections. See 'Cabling' section for more

information.

Connect the camera's main body to the mounting

bracket.

Adjust the panning angle of the camera and tighten

hard lock set screw to fix the camera. Use the

included six-angle wrench included with the camera

to tighten the screw and secure the camera module

to the mounting bracket.

Adjust the lens' angle by adjusting the controlling

screws on the main body. Use the included T-

wrench. The screws located at the base of the

camera dome control the lens' tilt up and down and

its rotation.

Lens Tilt Lens Rotation

10 When the installation is complete, detach the

protective film from the camera’s dome.

Warning:

The camera's lens module can rotate 360¡ at each

direction. Rotating the lens constantly to the same

direction may harm the internal rotation mechanism

and cause the lens' rotation harness to snap.

Tilting

Range

Rotating

Range

0°

90°

0°

360°

Installation -

Inserting / Removing the SD Memory Card

To open the SD card slot, use the included Torx wrench.

2 Insert the SD card in the arrow direction.

Do not insert the SD memory card while it’s upside down by

force. Otherwise, it may damage the SD memory card.

Main Body

Removing an SD Memory Card Gently press down on the

Remove the SD Memory Card gently by pressing down on

the exposed end of the memory card as shown in the

diagram to eject the memory card from the slot.

Pressing too hard on the SD memory card may cause the card to

shoot out uncontrollably from the slot when released.

If you have saved data in the SD memory card, removing the SD

memory card prior to setting record to OFF will cause damage to

the data stored in the card.

SD card Slot

memor

extern

devi

tha

record

and

video,

audio,

and

text

data

using

digital

devices.

Micro

(

Not

Included

)

-Type:

Micro

(SDHC)

Manufacturer:

Transcend,

Kingston,

Toshiba,

SanDisk

Capacity:

4~16G

-Class: over

Class

Inhaltsverzeichnis

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog DWC-PTZ10x Bedienungsanleitung

Digital Watchdog

Digital Watchdog B3252DIR Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV95Wi28TW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MB72Wi4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog D4252 Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MD724V Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light DWC-D4783WD Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MT94WiAT Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi28ATW Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-MC553WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MB45Wi650T Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT FLEX DWC-VS753WT6666 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix Flex DWC-PVX16WW Bedienungsanleitung

Digital Watchdog

Digital Watchdog V1372TIR Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B7553TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog OMNI-PLUS Snapit DWC-D4382D Bedienungsanleitung

Digital Watchdog

Digital Watchdog MC352DIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog x39 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MV72Wi4 Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA853WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Starlight V3363D Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT94WiAT Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung