Digitus DS-55515 Bedienungsanleitung

4K HDMI Extender Splitter

Set, 1x4

Manual

DS-55515

Important safety notice

Do not expose this device to rain, moisture and liquid

Do not put any stuff into the device

Do not disassemble or repair this device without qualified service

technician

Make sure the specification matched if using 3rd party DC adapters

1. Introduction

The DIGITUS® HDMI Extender Splitter Set extends an AV signal from

the source device over a distance of up to 70 m and distributes it

onto 4 screens in UHD resolution (4K/60Hz). Supports CAT 6/7/8

cables. Thanks to PoC, only the transmitter unit needs to be supplied

with power by an external power adapter. EDID management, ARC,

R232 signal transmission, HDMI loop-out and IR signal transfer are

also included as features.

2. Features

1. Supports 4K2K/60Hz (HDR, 4:4:4)

2. R232 signal transmission

3. Video bandwidth: 18 GBPS

4. Maximum transmission distance(UHD 4K2K): 70 m

5. POC (Power over Cable) - Only the transmitter unit requires an

external power adapter.

6. HDMI loop-out to the transmitter unit

7. HDCP 2.2 / 1.4

8. Supports CAT 6/7/8 cables

9. Audio return channel (ARC)

10. EDID management

3. Package Content

1x Transmitter unit

4x Receiver unit

1x IR transmission cable (1.5 m)

4x IR receiver cable (1.5 m)

1x Power adapter (DC 12V/3A, 1.45 m)

1x RS232 terminal block

1x Wall mounting fastening material

1x User manual

4. Specification

Transmission protocol Ipcolor

Distribution mode 1 IN 4 OUT

Transmission distance CAT6/6A/7≤70m

HDMI signal HDMI 2.0, HDCP 2.2

HDMI Resolution 480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz,1080p@50/60Hz,

1280x960, 1280x800, 1280x768,

1680x1050, 1360x768, 1366x768,

1600x900,1024x768, 800x600,

3840x2160@24/25/30/50/60Hz,

4096x2160@24/25Hz

Audio formats LPCM/DTS-HD/DTS-Audio/Dolby Digital

5.1

IR Support IR pass back function

(20KHz~60KHz)

RS-232 3 pin: TXD-RXD-GND, follows RS-232

levels

Working temperature -20~60°C

Storage temperature -30~70°C

Humidity

(no condensation)

0~90% RH

Protection ESD protection

1a Contact discharge level 3

1b Air discharge level 3

Implementation of the standard:

IEC61000-4-2

Lightning protection

Surge protection

Power supply TX: DC12V/3A

Power consumption TX<13W RX<4W

Material Iron

Color Black

Weight TX: 640g RX: 243g

Dimension TX: 264.5(L) x 104.0(W) x 23.0(H)mm

RX: 105.5(L) x 102.5(W) x 20.0(H)mm

5. Installation Requirements

1. HDMI source device (PC, DVD, play station, etc.)

2. HDMI display device (TV, monitor, projector, etc.)

3. UTP / STP CAT6 / CAT6A / CAT7 cable. Follow standard LEEE-568B

It is recommended to choose high-quality network cables

6. Panel Description

Transmitter (TX)

1 Power indicator The indicator will turn blue when the

power is turned on

2 Reset button Restart the device

3 IR out Connect with IR blaster extension cable

4 RJ45 output port Connect with Cat6/6A/7 network cables

5 HDMI output port Connect with local HDMI display device

with HDMI cable

6 HDMI input port Connect with HDMI source device with

HDMI cable

7 EDID DIP switch Set output resolution through EDID DIP

switch

8 RS-232 Port Connect with the external device to

control the transmitter.

9 Power Connect with DC 12V/3A power adapter

Receiver (RX)

1 Reset button Restart the device

2 Audio switch Choose the audio source (output from

the S/PDIF port) S/PDIF: from the

source device

ARC: from the TV (receiver end)

3 RJ45 signal input Connect with Cat6/6A/7 network cables

4 Power/Signal

indicator

When there is power and no HDMI

signal, the indicator will flash, when

there is HDMI signal, the indicator will

light solid blue

5 Power Connect with DC12V/2A power adapter

6 S/PDIF output Connect with speaker or amplifier

7 HDMI output Connect with HDMI display device

8 IR in Connect with IR receiver extension

cable

7. Installation Procedures

7.1 Network cable

Follow the standard of IEEE-568B:

1-Orange/white 2-Orange 3-Green/white

4-Blue 5-Blue/white 6-Green

7-Brown/white 8-Brown

7.2 Connection

7.3 Connection instructions

Connect the source device to the HDMI IN port of the transmitter

through an HDMI cable.

Connect the CAT6 OUT ports of the transmitter to the CAT6 IN

port of the receivers through the network cables.

Connect the HDMI OUTPUT port of the receivers to the display

devices through HDMI cables.

If using HDMI loop out, connect the LOOP OUT port of the

transmitter to the display through an HDMI cable.

If using the RS-232 control, connect the RS-232 port of the

transmitter to an external device.

Plug the power into the devices to get started.

7.4 IR User Guide

IR blaster extension cable should plug in the IR OUT port of the

transmitter, IR receiver extension cable should plug in the IR IN

port of the receivers.

The emitter of the IR blaster extension cable should be as close

as possible to the IR receiving window of the source device.

Point the remote control at the receiving head of the IR receiver

extension cable to operate.

8. Function setting

8.1 RS232 settings

The default configuration is as follows:

Baud rate: 9600

Data bits: 8

Stop bits: 1

Parity: 0

Control Commands Function Descriptions

ES XX On【Enter】Turn on the network signal output

port(s), choose from“01”to“04” (the

network ports from left to right are: 01,

02, 03, 04); “All” means all four ports

ES XX Off【Enter】Turn off the network signal output

port(s), choose from “01” to “02” (the

network ports from left to right are: 01,

02.); “All” means all four ports

Reset【Enter】Restart the device

Recover【Enter】Restore device factory settings

Baud XX 【Enter】Set the baud rate value: 9600 (default),

19200, 38400, 57600, 115200

Examples of control commands are shown below:

Inhaltsverzeichnis

Andere Digitus Medienkonverter Handbücher

Digitus

Digitus DA-70146-1 Bedienungsanleitung

Digitus

Digitus DN-95208 Bedienungsanleitung

Digitus

Digitus DA-70157 Bedienungsanleitung

Digitus

Digitus DS-40133 Bedienungsanleitung

Digitus

Digitus DA-70820 Bedienungsanleitung

Digitus

Digitus DS-45324 Bedienungsanleitung

Digitus

Digitus DS-40137 Bedienungsanleitung

Digitus

Digitus DN-652101-1 Bedienungsanleitung

Digitus

Digitus DS-41200 Bedienungsanleitung

Digitus

Digitus DN-82211 Bedienungsanleitung

Digitus

Digitus DS-40310-1 Bedienungsanleitung

Digitus

Digitus DA-70464 Bedienungsanleitung

Digitus

Digitus DS-40130 Bedienungsanleitung

Digitus

Digitus DN-651140 Bedienungsanleitung

Digitus

Digitus DA-70460 Bedienungsanleitung

Digitus

Digitus DC-KVS-12 Bedienungsanleitung

Digitus

Digitus DA-70460 Bedienungsanleitung

Digitus

Digitus DN-82010-1 Bedienungsanleitung

Digitus

Digitus DisplayPort DA-70472 Bedienungsanleitung

Digitus

Digitus DA-70471 Bedienungsanleitung

Digitus

Digitus DS-40101 Bedienungsanleitung

Digitus

Digitus DS-40201 Bedienungsanleitung

Digitus

Digitus DN-82212 Bedienungsanleitung

Digitus

Digitus DS-33150 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung