Digitus DN-7017 Bedienungsanleitung

Quick Installation Guide

Getting started

This is a step-by-step instruction on how to start using the router and get connected to the

Internet.

1) Setup your network as shown in the setup diagram below.

2) You then need to set your LAN PC clients so that it can obtain an IP address automatically.

By default the Broadband Router’s DHCP server is enabled so that you can obtain an IP

address automatically.

Note: Please make sure that the Broadband router’s DHCP server is the only DHCP

server available on your LAN. If there is another DHCP on your network, then you’ll need

to switch one of the DHCP servers off.

3) Once your PC has obtained an IP address from your router, enter the default IP address

192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press

<enter>

4) The login screen below will appear. Enter the “User Name” and “Password” and then click

<OK> to login.

Note: By default the user name is “admin” and the password is “1234”. For security

reasons it is recommended that you change the password as soon as possible (in

General setup/system/password, see chapter 2)

Select the section (Quick Setup Wizard, General Setup, Status Information and Tools) you

wish to configure and proceed to the corresponding chapter. Use the selections on the web

management’s top right hand page (see below) to navigate around the web-based

management User Interface.

Quick Setup

The Quick Setup section is designed to get you using the broadband router as quick as

possible. In the Quick Setup you are required to fill in only the information necessary to access

the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see

the screen below.

Step 1) Time Zone

The Time Zone allows your router to base its time on the settings configured here, this will

affect functions such as Log entries and Firewall settings.

Parameter Description

Enable NTP client update Check this box to enable the auto time

synchronization function. The router will set its time

based on your selection.

Time Zone Select You can select your local time zone here. The router

will sync time according to your time zone selection.

NTP server Select the time server to synchronize with.

Click on NEXT to proceed to the next page (step 2) LAN Interface.

Step 2) LAN Interface

The LAN Interface settings allow you to configure the parameters for local area network.

Parameter Description

IP Address This is the router’s LAN port IP address (Your LAN

clients default gateway IP address)

Subnet Mask Specify a Subnet Mask for your LAN segment.

Click on NEXT to proceed to the next page (step 3) WAN Interface.

Step 3) WAN Interface Setup

In this section you have to select one of four types of connections that you will be using to

connect your broadband router’s WAN port to your ISP (see screen below).

Note: Different ISP’s require different methods of connecting to the Internet, please check with

your ISP as to the type of connection it requires.

Menu Description

Static IP Your ISP has given you an IP address already.

DHCP Client Your ISP will automatically give you an IP address.

PPPoE Your ISP requires you to use a Point-to-Point Protocol over

Ethernet (PPPoE) connection.

PPTP Your ISP requires you to use a Point-to-Point Tunneling

Protocol (PPTP) connection.

Click on one of the WAN type and then proceed to the manual’s relevant sub-section. Click on

NEXT to proceed to the next page (step 4) Wireless Basic Settings.

* Please refer to the user manual in the CD-ROM for detailed description.

Step 4) Wireless Basic Settings

Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE 802.11b

or 801.11g wireless network adaptor connect to your Intranet. It supports WEP and WPA2

encryption to enhance the security of your wireless network.

Menu Description

Band It allows you to set the AP fix at 802.11b or 802.11g mode.

You also can select B+G mode to allow theAP select 802.11b

and 802.11g connection automatically.

Mode It allows you to set the AP to AP, Client, WDS orAP + WDS

mode.

Network Type In client mode, you can specify your client to connect as an

infrastructure client or an ad hoc client.

SSID This is the name of the wireless LAN. All the devices in the

same wireless LAN should have the same ESSID.

Channel Number The channel used by the wireless LAN. All devices in the

same wireless LAN should use the same channel.

Enable MAC Clone Check the check box will let router copy the first seen MAC

address to the WLAN MAC.

Click on NEXT to proceed to the next page (step 5) Wireless Security.

Step 5) Wireless Security Setup

This page allows you setup the wireless security. Turn on WEP or WPA by using Encryption

Keys could prevent any unauthorized access to your wireless network.

Menu Description

None Do not apply any encryption to wireless usage. Everyone can

access the wireless without permission.

WEP You can select the WEP key length for encryption, 64-bit or

128-bit. Larger WEP key length will provide higher level of

security, but the throughput will be lower.

WPA(TKIP) You can use a pre-shared key to authenticate wireless

stations and encrypt data during communication. And use

TKIP to change the encryption key frequently.

WPA2(AES) You can use a pre-shared key to authenticate wireless

stations and encrypt data during communication. And use

CCMP(AES) to change the encryption key frequently.

WPA2 Mixed This will use TKIP or AES based on the other communication

peer automatically.

* Please refer to the user manual in the CD-ROM for detailed description.

Clicking on OK to save and active all the settings. Now, you can start to use the router as your

internet gateway.

Inhaltsverzeichnis

Andere Digitus Netzwerk-Router Handbücher

Digitus

Digitus DN-95330 Bedienungsanleitung

Digitus

Digitus DN-50011 Bedienungsanleitung

Digitus

Digitus DN-70184 Bedienungsanleitung

Digitus

Digitus DN-15017 Bedienungsanleitung

Digitus

Digitus 15019-2 Bedienungsanleitung

Digitus

Digitus DN-80110 Bedienungsanleitung

Digitus

Digitus DN-8006C1 Bedienungsanleitung

Digitus

Digitus DN-60021-2 Bedienungsanleitung

Digitus

Digitus EASY WEASEL Bedienungsanleitung

Digitus

Digitus DN-11009 Bedienungsanleitung

Digitus

Digitus DN-80117 Bedienungsanleitung

Digitus

Digitus DN-7039-B Bedienungsanleitung

Digitus

Digitus DN-60012 Bedienungsanleitung

Digitus

Digitus DN-95346 Bedienungsanleitung

Digitus

Digitus DN-7039 Bedienungsanleitung

Digitus

Digitus GreyRapid N DN-7049-1 Bedienungsanleitung

Digitus

Digitus DN-60011-1 Bedienungsanleitung

Digitus

Digitus DN-11004-O Bedienungsanleitung

Digitus

Digitus DS-23200 Bedienungsanleitung

Digitus

Digitus EASY WEASEL DN-7062 Bedienungsanleitung

Digitus

Digitus GreyRapid N Bedienungsanleitung

Digitus

Digitus DN-651103 Bedienungsanleitung

Digitus

Digitus WHITE WEASEL MOBILITY Bedienungsanleitung

Digitus

Digitus BR-6478AC Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise