Dini Argeo LTP Bedienungsanleitung

www.diniargeo.com

LTP

Forklift hydraulic weighing system

ENGLISHINSTALLATION AND OPERATING INSTRUCTIONS

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

Contents

Introduction 4

Weighing system specifications 4

Warnings 5

Forklift requirements 5

Kit components 6

Weight indicator 6

Pressure sensor 8

Fixing bracket for the indicator in the cabin 8

Reference stickers 8

Kit installation 10

Before installation 10

Sensor installation 11

Installing the indicator 12

Applying reference stickers 14

Calibration 15

Calibration linearisation 19

Additional parameters (for experienced users only) 20

Programming menu 22

Communication strings 43

Wiring diagram 44

Error messages 45

Summary of the parameters 46

Notes 48

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

Dear Customer,

Thank you for purchasing a DINI ARGEO product.

This manual explains the installation and commissioning for the hydraulic weighing system for forklifts.

In particular, the installation of the sensor and the calibration of the indicator are described (with the corresponding adjustable ranges of values

and practical programming examples) to assist the technician during system installation.

For any additional information or speciﬁc requests, please contact your local dealer.

This publication is optimised for A4 printing.

Introduction

Weighing system speciﬁcations

POWER SUPPLY 5 Vdc, via external power supply unit.

MAXIMUM CAPACITY 4000 PSI / 280 bar.

RECOMMENDED RESOLUTION 20 kg for capacities up to 2500 kg.

50 kg for capacities up to 5000 kg.

100 kg for capacities up to 10000 kg.

RECOMMENDED MINIMUM WEIGHT 10 reading divisions.

PROTECTION RATING OF THE SENSOR IP65.

DISPLAY Backlit 25mm LCD with 6 high contrast digits and icons to indicate active functions.

KEYPAD Membrane, 5 keys.

PRINTER Optional (code OBTPRLT).

Requires power from the forklift

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

• The weighing system does not change the safety regulations normally applied to the forklift.

• Before weighing, make sure that the forklift is stationary, on a ﬂat surface and that there are no people in the area around the load.

• The employee training on the use of the system is the purchaser’s responsibility.

• Please read this manual carefully before using the system.

• Assistance must only be carried out by personnel authorised by Dini Argeo.

• Dini Argeo is not responsible for any weighing errors resulting from improper use of the system.

For proper operation of the system, the forklift must meet the following requirements:

• Minimum friction between the sliding parts.

• No oil leaks.

• Good lubrication of the mast and chains.

• Good level of cleanliness.

• Use of an oil with a high viscosity index.

To make the system repeatable (i.e. to display the same weight when weighing in succession), the forklift must be kept in constant condition,

therefore regular cleaning and maintenance must be carried out.

Warnings

Forklift requirements

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

Kit components

1. Weight indicator

Powered directly from the forklift battery (via optional internal power supply), 5-key keypad and LCD

Vertical tilt can be adjusted via the integrated bracket.

The LTP kit consists of:

• Weight indicator

• Pressure sensor

• Fixing bracket to the forklift

• Reference stickers

• Power supply unit (optional)

• Thermal printer (optional)

Optimized layout for A4 print.

7 8

TECH_MAN_ENG_LTP

DISPLAY AND KEYBOARD

ITEM ICON DESCRIPTION

1This indicates that the scale is empty (gross zero).

2This indicates that the weight is unstable.

3The net weight is displayed.

Note: A tare has been stored.

4 / 5 The gross weight is displayed.

6This indicates the battery level:

7A tare has been blocked.

8A manual tare is active.

9lb ... kg This indicates the unit of measure: pounds (lb), tons (t), kilograms (kg), grams (g).

10 This indicates that a key has been pressed. In some operating modes, this indicates that a speciﬁc

function is active.

11 ---- Weight acquisition phase.

Key Description

• For numerical entries, decreases the value.

• If pressed for a long time (2 sec), it allows you to set the brightness of the display.

• For numerical entries, increases the value.

• If pressed for a long time (2 sec) it allows you to insert a preset tare.

• Recalls the function speciﬁc to the operating mode.

• For numerical entries, to change the selected digit

• If pressed for a long time (5 sec) it allows you to change the operating mode.

• Conﬁrm key.

• Print the receipt.

• If pressed for a long time (5 sec) it allows you to enter the conﬁguration menu.

• If pressed for 2 seconds, it turns o the instrument.

• If pressed for 5 sec it shows the metrological information.

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

3. Fixing bracket for the indicator in the cabin

Bracket for horizontal adjustment during installation.

2. Pressure sensor

Stainless steel sensor, IP65 protection rating and hydraulic connector with 1/4 inch parallel PSB female.

Sensor dimensions: length: 73.5 mm; diameter: 24.5 mm.

4. Reference stickers

Stickers used to identify the height range of the forks within which the weighing operations are to be carried out.

To be applied to the structure of the forklift.

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

OBTPRLT thermal printer with integrated bracket for ﬁxing to the forklift. Powered directly from the weight indicator (if optional internal

power supply unit is present).

5. Power supply unit (optional)

6. Thermal printer (optional)

The appropriate optional ALxxV5 power supply unit with 18 to 72Vdc or 40 to 160Vdc input can be chosen according to the voltage on the forklift.

The ALxxV5 power supply units can be installed inside the weight indicator and can simultaneously power the OBTPRLT printer, optimising

the wiring of the various components.

Optimized layout for A4 print.

TECH_MAN_ENG_LTP

Before installation

• Check that the maximum oil pressure is lower than the maximum value indicated on the sensor datasheet (4000 psi = 280 bar).

• Remove the pressure in the hydraulic circuit; this can be done in two ways:

A. Lower the forks to their maximum

andmove forward.

Make sure the chain is loose.

B. Place the forks on a stable object.

Make sure the chain is loose.

Kit installation

Andere Handbücher für LTP

Inhaltsverzeichnis

Andere Dini Argeo Zubehör Handbücher

Dini Argeo

Dini Argeo WLB-KSD Bedienungsanleitung

Dini Argeo

Dini Argeo LTP Bedienungsanleitung

Dini Argeo

Dini Argeo E-AF04 Bedienungsanleitung

Dini Argeo

Dini Argeo WWS Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EKR Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EGT Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EXT Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EXT Series Bedienungsanleitung

Dini Argeo

Dini Argeo DFWLKI3GD Bedienungsanleitung

Dini Argeo

Dini Argeo DGT4 Bedienungsanleitung

Dini Argeo

Dini Argeo DFWATEX2GD Bedienungsanleitung

Dini Argeo

Dini Argeo DFWPM Series Bedienungsanleitung

Dini Argeo

Dini Argeo DFW Bedienungsanleitung

Dini Argeo

Dini Argeo JB Bedienungsanleitung

Dini Argeo

Dini Argeo 3590ET Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EKR Series Bedienungsanleitung

Dini Argeo

Dini Argeo LTP Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EXP Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EXT Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EKR Series Bedienungsanleitung

Dini Argeo

Dini Argeo DFW Series Bedienungsanleitung

Dini Argeo

Dini Argeo 3590EKR Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung