Directed Electronics Viper 220MAX Bedienungsanleitung

Owner’s Guide for the

220 MAX models (Rev D)

Recreationnal Vehicle Security System

[Table of contents]

Your Warranty................................................................ 1

What’s included.............................................................. 2

System maintenance....................................................... 2

Transmitter Functions .................................................... 3

Arming the system ...................................................... 3

Disarming the system .................................................. 3

High security disarm .................................................... 3

Disarming without a transmitter .................................... 4

Valet mode ................................................................ 4

Auxiliary Function ....................................................... 4

Panic mode ................................................................ 5

Silent mode ............................................................... 5

Transmitter standard configuration ............................... 5

System protection ...................................................... 6

I 2002 Directed Electronics, (Canada). Inc.

Limited Lifetime warranty: Models 220MAX

Directed Electronics, Inc. (Canada) promises to the original purchaser to repair or replace with a comparable reconditioned model any DEI

unit (hereafter the “unit”), which proves to be defective in workmanship or material under reasonable use during the lifetime of the vehicle

provided that the unit was professionally installed and serviced by an authorised DEI dealer. All components other than the unit,

carry a one-year warranty from the date of purchase of the same. This warranty is non-transferable and is automatically void if: the unit has

been modified or used in a manner contrary to its intended purpose; the unit has been damaged by accident, unreasonable use, neglect,

improper service, installation or other causes not arising out of defects in materials or construction. The warranty does not cover damage to

the unit caused by installation or removal of the unit. The warranty does not cover the batteries. The defective unit must be returned to DEI,

shipping prepaid. This warranty does not cover labor costs for maintenance, removal or reinstallation of the unit or any consequential

damages of any kind.

IMPORTANT: The unit and its components are water resistant and not waterproof; the warranty will be void if the product is

damage because of prolong use or a total immersion in water.

It is understood that this system is deterrent against theft. Directed Electronics, Inc. (Canada) is not offering a garantee or insurance

against vandalism, damage or theft of the vehicle or its content. Directed Electronics, Inc. (Canada) has not authorized any person or entity

to create for it any other obligation, promise, duty or obligation in connection with this security system. The warranty on this product is

automatically void if the date, code or serial number is erase or altered.

Make sure you have all of the following information from your VIPER

dealer

A clear copy of the sales receipt, showing the following:

• Date of purchase • Vehicle license number

• Full name and address • Vehicle identification number

• Name and addresse of dealer • All security options installed on vehicle

• Type of security system installed • Installation receipts

• Year, make model and color of vehicle

Important Notice! This product must be installed by an Authorized DEI®dealer, if otherwise the warranty will be void. Ask

your dealer to present his Authorized dealer Certificat.

2002 Directed Electronics, (Canada). Inc. 1

[ What’s included ]

• One control module

• A pair of two-button remote transmitters

• A push-button Valet® switch

• An electronic tilt motion sensor

• A Fail-Safe® Starter Kill

• A back-up battery siren

• A Validation Certificat request form

(Must be filled out and returned with a copy of the invoice to DEI)

• HF+ external/receiver antenna

[ System maintenance ]

The system requires no specific maintenance. Your remote transmitter is pow-

ered by a small, lightweight 3 volts lithium battery that will last approximately

three year under normal use.

NOTE: When you store your vehicle, before removing your battery, you will

have to deactivate the siren with the key included with the remote.

POWER SAVER MODE : Your system will automatically enter Power Saver Mode while armed or in Valet,

after a period of time in which no operation has been performed. This feature will lowers the current draw to

the recreationnal vehicle’s battery.

POWER CONSUMPTION : Even if your security system is one of the most innovative on the market, it’s

power consumption may become excessive in some particular situation. We recommend that you use your

recreationnal vehicle and that yoiu should drive it for an extensive period of time once in a while. If the

recreationnal vehicle is used periodically, we recommend that you buy a low current battery charger to

preserve the vehicle’s battery life span.

2 2002 Directed Electronics, (Canada). Inc.

[ Transmitter Functions ]

Arming the system

You can activate, or arm, the system by pressing on your transmitter for one second. When

the system arms, you will hear a short siren sound, or chirp, and the brake light will flash once

(If installed).

Disarming the system

To disarm the system press . You will hear two chirps, and the brake light

will flash twice (If installed). If the siren chirps either four or five times when

disarming, that means that the security system has been trigger while you

were away.

High Security Disarm

This security system offers High Security Disarm. High Security Disarm is a

feature that makes it possible to silence and reset the system while it is trig-

gering , without disarming the system. If the system is triggered and the

siren has been sounding for longer than six seconds, pressing on the

transmitter will stop the trigger and return the unit to the arm state. The

system will not disarm but rather reset. This prevents you from disabling the

system should you wish to disarm it without visually checking the vehicle.

Pressing , after resetting the system, will disarm the system; pressing

this button during the first 5 seconds of the triggered sequence will disarm

the security system immediately.

2002 Directed Electronics, (Canada). Inc. 3

Modèle #473V

Disarming without a transmitter

This feature allows you to disarm the security system without the remote

transmitter should it be lost, damaged or disabled. In order to disarm the

system without the transmitter, you must have the vehicle’s ignition key and

know where the Valet button is located.

To disarm the security system, turn the ignition to the “ON” position. Press

the Valet button the preset number of times (one to five times) within 15

seconds. After 5 seconds, the system will now disarm. If the system does not

disarm, you may have waited too long; turn the ignition “OFF” and “ON” and

try again

Location of the Valet button : ______________________________

Number of pulses : _______________________

Valet Mode

You can prevent your security system from automatically arming and trig-

gered by using the Valet Mode. This is very useful when washing the

recreationnal vehicle or having it serviced. In Valet mode, the security system

will not arm, even with the remote transmitter.

To enter or exit Valet mode :

1. Turn the ignition “ON”

2. Turn the ignition “OFF”

3. Press and release the Valet button within 10 seconds.

You are now in Valet mode , to exit Valet mode repeat step 1 thru 3 again.

Auxiliary function

Press on buttons and together for 2.5 seconds, this will activate

optionnal 508 D Microwave perimeter sensor.

4 2002 Directed Electronics, (Canada). Inc.

Panic Mode

If you are threatened near your recreationnal vehicle, you can attract atten-

tion by triggering the system with the remote transmitter. Just press for

2.5 seconds, and you will enter Panic Mode. The siren will sound and the

brake light will flash (If installed) for the programmed siren duration. to stop

Panic Mode at any time, press on the remote transmitter again.

Silent Mode

To temporarily turn off the arm or disarm chirps, use the Slent Mode. Simply

press for less than one second before arming or disarming, and

confirmation chirp(s) will be eliminated for the one operation only. If you

want the arm/disarm chirps turned off permanently, your dealer can do this

for you.

NOTE: The warn Away response to lighter impact is bypassed if the system is armed using Slient Mode. This

ensures that no chirps will beemitted by the siren in an area you want chirp-free. The system is still capable

of triggering, only the Warn Away response is bypassed.

Standard transmitter configuration

The security system is suplplied with 2- 4 button remote transmitter, when

using the auto configuration of the Transmitter Learn Routine, here’s the stand-

ard configuration you will get of the 820041 remote transmitter, will be :

Arms the security system

Disarm the security system

Panic Mode activation, press for 1.5 seconds

Silent Mode activation, press for 1.5 seconds

before pressing on the lock/unlock button

AND Channel 3 for auxiliary function 508 D

activation

2002 Directed Electronics, (Canada). Inc. 5

[ Protection Features ]

Electronic tilt motion sensor: When arming the system, the detector

reads the position of the vehicle and won’t allow a motion of more than three

degrees. Even if it is pushed forwards or backwards, it will trigger the alarm.

Note: When arming the system, the detector requires 30 seconds to auto-calibrate. To testing should be

performed during that period of time.

Starter Kill: When arming the security system, it becomes impossible to

start the recreationnal vehicle. At the same time, the ignition is protected.

The system will detect any power in the ignition circuit and it will trigger the

alarm.

Back-up battery siren: This siren has a built-in rechargeable battery. Dis-

connecting the power or ground will trigger the siren until the internal battery

is discharged or the power is re-connected.

A push-button Valet®switch: This button should be hidden and it’s known

only by the owner . It has two functions. The first one allows you to disarm

the system without the transmitter should it be lost or damaged.The second

one is to change the system features or get into transmitter Learn Routine

mode.

2002 Directed Electronics, (Canada). Inc. 7

The Company behind Merlin

recreationnal vehicle security sys-

tems is Directed Electronics, Inc.

Since it’s inception, Directed Electron-

ics has had one purpose, to provide

consumer’s with the finest vehicle se-

curity and car audio products and ac-

cessories. The recipient of nearly 100

patents and Innovations Awards in the

field of advanced electronic technology,

Directed Electronics is ISO 9001 and QC

9000 registered.

Quality Directed electronics products

are sold and serviced throughout North

America and around the world.

Call (800) 361-7271 for more infor-

mation about our products and services.

Visit our website at

www.directed.ca

Directed Electronics sis committed to delivering

world class quality products and services that ex-

cite and delight our customers .

Inhaltsverzeichnis

Andere Directed Electronics Autoalarmanlage Handbücher

Directed Electronics

Directed Electronics Intelliguard 850 Bedienungsanleitung

Directed Electronics

Directed Electronics Clifford G5 Bedienungsanleitung

Directed Electronics

Directed Electronics AM1 Bedienungsanleitung

Directed Electronics

Directed Electronics Auto Mate AMX 8.5 Bedienungsanleitung

Directed Electronics

Directed Electronics Clifford 120XV Bedienungsanleitung

Directed Electronics

Directed Electronics AM2 Bedienungsanleitung

Directed Electronics

Directed Electronics Clifford RS2.1 Bedienungsanleitung

Directed Electronics

Directed Electronics G312R Kurzanleitung

Directed Electronics

Directed Electronics 425 Series Bedienungsanleitung

Directed Electronics

Directed Electronics Viper 211HV Bedienungsanleitung

Directed Electronics

Directed Electronics Python 571XP Bedienungsanleitung

Directed Electronics

Directed Electronics VIPER 1000 Bedienungsanleitung

Directed Electronics

Directed Electronics Viper 140 HF Bedienungsanleitung

Directed Electronics

Directed Electronics Python 323 Bedienungsanleitung

Directed Electronics

Directed Electronics 6000 Bedienungsanleitung

Directed Electronics

Directed Electronics Model 3000 ESP Bedienungsanleitung

Directed Electronics

Directed Electronics 737T Bedienungsanleitung

Directed Electronics

Directed Electronics G322R Kurzanleitung

Directed Electronics

Directed Electronics 446 Series Bedienungsanleitung

Directed Electronics

Directed Electronics 700 ESP Bedienungsanleitung

Directed Electronics

Directed Electronics IntelliGuard 7000 Bedienungsanleitung

Directed Electronics

Directed Electronics Hornet 742T Bedienungsanleitung

Directed Electronics

Directed Electronics 7900 Bedienungsanleitung

Directed Electronics

Directed Electronics Viper 571XV Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung