Directed 933.TL7 Bedienungsanleitung

DS3+ / DS4+ 933.TL7

v2.39.198.9

2016 Toyota 4Runner (G Key)

THTON10, THTON5 Compatible

(Sold Separately)

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Key type 5

Installation 6

Wiring diagram with T-Harness (THTON5) 6

Wiring diagram with T-Harness (THTON10) 7

Wiring diagram 8

Locating components in the vehicle 9

Vehicle connections 10

Module programming 13

Important! The master key is required to complete the module programming successfully. 13

Module programming for convenience only (skip transponder) 14

Module programming for security-only installations 15

Pairing remotes 16

Connecting the module 16

8556T Temperature Sensor 16

8504D Combo Sensor 16

RF Systems 16

When used in conjunction with SmartStart 17

D2D port configuration 17

Manual transmission 18

LED diagnostics and troubleshooting 19

Soft reset 21

Hard reset 21

Tach learning procedure (not needed with Virtual Tach) 22

Initializing Virtual Tach (not needed with hardwired or data tach applications) 22

Limited lifetime consumer warranty 23

Quick Reference Guide (customer copy) 24

Contents

3933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Introduction

This guide provides information on the installation of the DS3/DS3+ and DS4/DS4+ modules as a digital solution. Using these modules in a

digital conﬁguration require the module to be ﬂashed with vehicle speciﬁc ﬁrmware. Refer to our website (www.directechs.com) and click on

the DIRECTLINK text in the header for additional information.

DS3/DS3+ and DS4/DS4+ modules provide an all-in-one solution for most modern vehicles, and include remote start, keyless entry, security,

and immobilizer bypass capabilities. T-harnesses may also be used in many applications for easy installation.

The following methods are available to conﬁgure modules:

• Web: www.directechs.com (DS3/DS3+ and DS4/DS4+)

• Desktop Application: Directlink DT (DS3/DS3+ and DS4/DS4+)

• Mobile Device: Directlink App (DS4/DS4+ only)

When Flashing via Directlink DT (Desktop app) or via the Web, an XKloader2 will be required.

To conﬁgure via Web or DirectLink DT (mobile app):

1. Disconnect the main module from any (+) 12V power source.

2. Connect the module to your computer using the XKLoader2.

3. Follow the steps in the pop-up window that will be displayed when the module is detected.

Notes:

•Flashing via web is only possible using Internet Explorer on Windows 8, 8.1, and 10.

•This method is not compatible with any other browser (Edge, Chrome, Firefox, etc.)

•When using Windows 11 or newer, Directlink DT is mandatory.

The DS4/DS4+ module is designed to be conﬁgured using the DirectLink application through mobile devices.

To download the DirectLink mobile application, visit the Google Play or Apple store. They can also be

conﬁgured via Web and DirectLink DT. The DS4/DS4+ features are built in Bluetooth® 4.0, allowing you to

conﬁgure and control your system. The DS3/DS3+ module is not equipped with Bluetooth®, therefore is not

compatible with the DirectLink app for mobile devices.

To conﬁgure via DirectLink DT (mobile app):

1. Follow and complete the wiring diagram(s) related to your installation through the app.

2. When installation is complete, select Conﬁgure DS4/DS4+.

3. Follow the on-screen instructions.

FLASH REQUIRED!

4 White

4933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Parking Lights Control

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Trunk / Hatch Release

DS4+/DS3+/VSM3 Only

Fuel level/EV battery level

* Odometer

Immobilizer Bypass-Data No Key Req'd

3x LOCK START (Start control using OEM Remote)

Accessory Activation

Ignition Activation

RAP Shut Down (Retained ACC Power)

Remote Start Takeover

SmartStart

Start (Crank) Activation

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Entry Monitoring Trunk/Hatch Pin

Factory Alarm Trigger Monitoring

Brake Status (foot brake)

Door Locks Status

E-Brake Status

Ignition Status

5933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Pre-installation and application warnings

START HERE This section highlights important information for this speciﬁc ﬁrmware and will assist in pricing accordingly, as

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

compatible THTON5 or THTON10 Keys required for

programming 1Keys required

for operation 0

Vehicle Takeover Refer to the Quick Reference Guide section for more details.

Firmware notes

Important! The master key is required to complete the module programming successfully.

A DS4+ module is required for this installation, as the Relay harness (H2), 10-pin white connector is used.

Keysense: Do not connect the keysense wire in the installation for each of these vehicles or you will encounter issues when

attempting to start the vehicle.

T-Harness (THTON5 or THTON10):

•All T-Harness wires not listed in the diagram are not required for the installation. Loose wires such as Siren Output and

Hood Input may need to be pulled from the tapped section of the T-harness. Refer to the "wiring diagram with T-Harness"

for more information on connections and installation instructions.

•The optional Plug & Play THTON5 or THTON10 T-Harness is sold separately.

•The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.

•All T-Harness wires not listed in the diagram are not required for the installation.

Fuses: It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each

wiring diagram.

All connectors are displayed from the wire side (unless speciﬁed otherwise).

Refer to the Vehicle connections following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if

not supported in data.

[2] Siren: Only required when enabling the security features during module ﬂashing.

[3] Green wire: Only required for starter disable and antigrind applications.

[4] Autolights Interrupt: Only required if vehicles are equipped with autolights.

[5] Parking light output: Only required if parking lights are not supported in data.

Key type

Some Toyota 2010+ models have different encryption types. Please look at your key blade and identify the markings.

G-stamped keys Standard Key

H-stamped keys

For vehicles with H-stamped keys, see

the TL10 firmware.

For vehicles with G-stamped keys, see

the TL5 & TL7 firmware.

For vehicles with dot-stamped keys,

see the TL11 firmware.

Note: Some replacement keys

may not have any markings on

the key.

6933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram with T-Harness (THTON5)

456

161718 131415

789

Autolights: Pin 19

(-) Parking Lights: Pin 18

Headlight

Switch

Autolights Interrupt (conn. side): Lt. Green

Autolights Interrupt (veh. side): Lt. Green/White

Ignition Connector

RDA: Orange/Black

THTON5

(optional T-Harness)

Diagnostic Connector OBDII

CUT

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

(-) Parking Lights Output: Lt.Green/Black: 1

Siren

Hood Pin

Parking Light: Lt. Blue/Black

Lt. Blue/Black Parking Light

Refer to the Vehicle connections section

for more specific T-harness compatibility.

Body ECU Connector

Refer to the “Vehicle connections”

section for wire and connector

details.

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

10-pin White Connector

8-pin White Connector

12-pin Black Connector

7933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Cut the

Orange/Green and

Orange/Brown loops

labeled CAN2.

Wiring diagram with T-Harness (THTON10)

Main

Body

ECU

(Back)

Siren

Hood Pin (-) Hood Input: Gray

(+) Siren Output: Brown/Red

THTON10

(optional T-Harness)

Cut the

Dk. Green/Black and

Dk. Blue/Black loops

labeled Lock/Unlock.

10-pin White Connector

Cut the

Violet/White loop

labeled Tach.

12-pin Black Connector

Ignition Connector

Diagnostic Connector OBDII

Body ECU Connector

(middle conn. left side of

steering column)

8-pin White Connector

22-pin White Connector

Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

Steering Lock

(black 7-pin connector)

NOT USED

IMPORTANT

Programming error

can occur if the 7-pin

connector is used.

8933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram

Autolights Interr. (conn. side): Lt. Green: 8

Autolights Interr. (veh. side): Lt. Green/White: 9

(-) Ground: Black: 10

(+) Starter 2 Output: White: 5 & 11

HS CAN Low: Tan: 1

HS CAN High: Tan/Black: 2

RDA: Orange/Black: 7

SIL Data Output: Yellow/Black: 8

Siren

Hood Pin

(+) 12V Input: Red: 6 & 12

(-) Hood Input: Gray: 21

(+) Siren Output: Brown/Red: 11

RDA

Diagnostic Connector OBDII

Headlight

Switch

HS CAN Low:

Pin 14

HS CAN High:

Pin 6

SIL DATA:

Pin 7

456

161718 131415

1112

123

789

1920

(-) Parking Lights Output: Lt.Green/Black: 1

(-) Parking Lights: Pin 18

Autolights: Pin 19

(+) Ignition Input/Ouput: Pink: 10

(+) 12V Input: Red: 5

(+) Accessory Output: Orange: 8

(+) 12V Input: Red/White: 9

(+) 12V Input: Red/Black: 2

(+) Ignition 2 Output: Pink/White: 4

(+) Starter Output (veh. side): Violet: 7

Starter Input (conn. side): Green: 6

1234

(+) Ignition 2:

Pin 4

(+) Ignition 1: Pin 6

(+) Accessory: Pin 3

(+) Starter 2: Pin 1

(+) 12V: Pin 7

Ignition

Connector

(+) Starter 1:

Pin 8

CUT

CUT Security Only

Mandatory Connections

Remote Start Only

Legend:

Remote Start + Security

IMPORTANT:

Position the

fuses correctly!

Slide to open

MAIN (5A) (+)

(-) RLY3 PK LIGHT (15A) (+)

(-) ACC & START (30A) (+)

(-) FLEX RLY (20A) (+)

IGN (20A) (+)

Body ECU Connector

Refer to the “Vehicle connections”

section for wire and connector

details.

9933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Locating components in the vehicle

10 933.TL7 2.39.198.9 2016 Toyota 4Runner (G Key)

Vehicle connections

The connection information listed below is specific to the 2016 Toyota 4Runner (G Key). Refer to “Pre-installation and application warnings” for a list of important notes.

Data harness, 8-pin white connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H1/1 Tan (Data) HS CAN Low OBD-Data Link Connector, white 16 pin plug, pin 14 Data White Mandatory

H1/2 Tan/Black (Data) HS CAN High OBD-Data Link Connector, white 16 pin plug, pin 6 Data Violet Mandatory

H1/3 Orange/Brown No Connection No Connection

H1/4 Orange/Green No Connection No Connection

H1/5 Lt. Green No Connection No Connection

H1/6 Violet/Brown No Connection No Connection

H1/7 Orange/Black (Data) RDA Body ECU on dash fuse box, white 30 pin plug, pin 26 Data Pink Mandatory

H1/8 Yellow/Black (Data) SIL OBD-Data Link Connector, white 16 pin plug, pin 7 Data Green Remote Start

Only

Analog input/output harness, 22-pin white connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color Connection

H2/1 Lt. Green/Black (-) Pk Light Output [5] Headlight Switch, white 20 pin plug, pin 18 - Red

H2/2 Blue/White No Connection No Connection

H2/3 Dk. Green/Black No Connection No Connection

H2/4 Red/White (-) Trunk Output No Connection

H2/5 Brown/Black (-) Horn Output Horn Switch --or-- Dash Fuse Box, white 40 pin plug (2D), pin 29 - Gray to Gray/Blue Optional

H2/6 Brown/White No Connection No Connection

H2/7 White (+) No Connection No Connection

H2/8 Violet/Black No Connection No Connection

H2/9 Dk. Blue/Black No Connection No Connection

H2/10 Lt. Blue/Black No Connection No Connection

H2/11 Brown/Red (+) Siren Output [2] Security Only

H2/12 Pink No Connection No Connection

H2/13 Violet No Connection No Connection

H2/14 Brown No Connection No Connection

H2/15 White/Blue No Connection No Connection

H2/16 Red/Blue No Connection No Connection

H2/17 Black/White No Connection No Connection

H2/18 Orange/Black No Connection No Connection

H2/19 Blue No Connection No Connection

H2/20 Green No Connection No Connection

H2/21 Gray (-) Hood Switch Input [1]

H2/22 Violet/White No Connection No Connection

Inhaltsverzeichnis

Andere Directed Autozubehör Handbücher

Directed

Directed XPRESSKIT optimax Series Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed VOXX DEI 933.VW14 v2.11.198.12 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs NISS07 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS4 Plus FORD12 Bedienungsanleitung

Directed

Directed Directechs DS3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 403.TL10 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung