Directed Directechs DB3 Bedienungsanleitung

DB3 403.GM10

v4.27

2016 Buick Verano

THGM610D, THGMD1 Compatible

(Sold Separately)

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Installation 6

Wiring diagram with T-Harness (THGMD1 Rev. 1) 6

Wiring diagram with T-Harness (THGMD1 Rev. 3) 7

Wiring diagram with T-Harness (THGM610D Rev. 1 & 2) 8

Wiring diagram with T-Harness (THGM610D Rev. 3) 9

Wiring diagram 10

Locating components in the vehicle 11

Vehicle connections 12

Module programming 14

Key2GO 15

Connecting the module 15

LED diagnostics and troubleshooting 16

Soft reset 18

Hard reset 18

Feature programming 19

Feature and option list 20

Limited one year consumer warranty 21

Quick Reference Guide (customer copy) 22

Contents

3403.GM10 4.27 2016 Buick Verano

Introduction

DB3 is an all-in-one door lock and override module.

Warning!

This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs

Mobile application for smartphones. Refer to “Connecting the module” for more information.

4403.GM10 4.27 2016 Buick Verano

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Trunk / Hatch Release

Control of aftermarket alarm with OEM remote

Fuel level/EV battery level

Key2GO

* Odometer

Immobilizer Bypass-Data No Key Req'd

OEM Remote Start Activation using XL-202 or RF kit

RAP Shut Down (Retained ACC Power)

Remote Start Ready

Remote Start Takeover

SmartStart

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Brake Status (foot brake)

E-Brake Status

5403.GM10 4.27 2016 Buick Verano

Pre-installation and application warnings

Firmware notes: This section highlights important information for this speciﬁc ﬁrmware and will assist in

pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.

T-Harness

compatible THGMD1 or THGM610D Keys required for

programming 1Keys required for

operation 0

Key2GO is mandatory to control the immobilizer override in this ﬁrmware.

The optional Plug & Play THGMD1 or THGM610D T-Harnesses are sold separately.

Heated Seat Activation is ONLY available in compatible vehicles (See "Feature programmming" for more information).

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic

connector.

The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.

Refer to the "Vehicle connections" following the installation diagram.

General notes: This section highlights important information for this speciﬁc ﬁrmware.

[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.

[2] If the RAP Off wire is NOT connected, the radio will turn OFF but some lights will remain ON in the center console for 10

minutes. Connect the Green/Black wire, pin 2/12 to the vehicle driver door input to avoid the issue. The RAP Off/Door

input color and location can be found in the "Vehicle connections" section.

6403.GM10 4.27 2016 Buick Verano

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

The Remote Start Safety Override

Switch MUST be in the ON position.

THGMD1 Rev. 1 (Optional T-Harness)

Ignition Switch

(black or white connector)

HS CAN Low: Pin 14

HS CAN High: Pin 6

HS CAN High: Tan/Black

HS CAN Low: Tan

SW CAN: Pin 1

SW CAN: Lt. Green

Ignition Barrel 16

OBDII Diagnostic

(connector side view)

(-) RAP Off Output: Green/Black

Hood: White/Black Hood Pin

Note: The Hood Pin is

only required on

vehicles that are not

equipped with a

factory hood pin.

Wiring diagram with T-Harness (THGMD1 Rev. 1)

Type 2

NOT USED

CONNECT

Immobilizer Control Module

(violet connector

under ignition switch)

Away from

Immobilizer Control Module

(vehicle side)

D2D

only

D2D Port

XKD2D65

(+) 12V

(+) 12V Input

(-) Parking Lights Output

(-) Ground

1 2 3 4 5

121198 10

Headlight Switch

(black 12-pin connector)

(-) Parking Lights: Pin 3, 5 or 7

Refer to the

Vehicle connections

section for the

corresponding

connector, pin and

wire color of your

vehicle.

(+) Ignition Input/Output

(MUX) Clutch Output: Violet/Green

(MUX) Clutch Output: Violet/Brown

Remote Start Safety

Override Switch

(-) Driver’s Door Trigger

Refer to the Vehicle connections

section for the corresponding

connector, pin and wire color. ABC

ONLY required for

manual transmission

applications.

Clutch: Yellow, pin B

Clutch Switch

(black 3-pin connector)

Do not connect

1412

10 42

Type 1

Tap on to the

Yellow wire of this

3-pin connector and

connect it to the

Ignition Input of the

Remote Starter.

7403.GM10 4.27 2016 Buick Verano

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

The Remote

Start Safety

Override

Switch MUST

be in the ON

position.

THGMD1 Rev. 3 (Optional T-Harness)

Ignition Switch

(black or white connector)

HS CAN Low: Pin 14

HS CAN High: Pin 6

HS CAN High: Tan/Black

HS CAN Low: Tan

SW CAN: Pin 1

SW CAN: Lt. Green

Ignition Barrel 16

OBDII Diagnostic

(connector side view)

(-) RAP Off Output: Green/Black

Hood: White/Black

Hood Pin

Note: The Hood Pin is only required on vehicles

that are not equipped with a factory hood pin.

Wiring diagram with T-Harness (THGMD1 Rev. 3)

Type 2

NOT USED

Type 1

Immobilizer Control Module

(violet connector

under ignition switch)

Away from

Immobilizer Control Module

(vehicle side)

(+) Ignition Input: Pink

D2D

only

D2D Port

XKD2D65

(+) 12V

(+) 12V Input

(-) Parking Lights Output

(-) Ground

1 2 3 4 5

121198 10

Headlight Switch

(black 12-pin connector)

(-) Parking Lights: Pin 3, 5 or 7

Refer to the

Vehicle connections

section for the

corresponding

connector, pin and

wire color of your

vehicle.

(+) Ignition Input/Output

(MUX) Clutch Output: Violet/Green

(MUX) Clutch Output: Violet/Brown

Remote Start Safety

Override Switch

(-) Driver’s Door Trigger

Refer to the Vehicle connections section

for the corresponding connector, pin

and wire color of your vehicle.

ABC

ONLY required for

manual transmission

applications.

Clutch: Yellow, pin B

Clutch Switch

(black 3-pin connector)

Do not connect

1412

10 42

8403.GM10 4.27 2016 Buick Verano

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

D2D

only

Wiring diagram with T-Harness (THGM610D Rev. 1 & 2)

THGM610D Rev. 1 & 2 (Optional T-Harness)

Use connectors

labeled GM10

3-pin

connectors

GM 10 GM 10

NOT USED

Hood Pin

Note: The Hood Pin is only required

on vehicles that are not equipped

with a factory hood pin.

Remote Start Safety

Override Switch

Ignition Switch

(black or white

connector)

Immobilizer

Control Module

(violet connector

under ignition

switch)

Away from

Immobilizer

Control Module

(vehicle side)

Ignition Barrel

NOT USED

HS CAN Low: Pin 14

HS CAN High: Pin 6

SW CAN: Pin 1

OBDII Diagnostic

(connector side view)

Cut

4-pin

White

Connector

Cut away the 4-pin

connector and connect

the three wires to the

OBDll 16-pin connector.

HS CAN High: Tan/Black

HS CAN Low: Tan

SW CAN: Lt. Green

3-pin

connectors

T-01

T-02

(+) 12V

(+) 12V Input

(-) Parking Lights Output

ABC

(MUX) Clutch Output: Violet/Green

(MUX) Clutch Output: Violet/Brown

ONLY required for

manual transmission

applications.

Clutch: Yellow, pin B

Clutch Switch

(black 3-pin connector)

(+) Ignition Input: Pink

(+) Ignition Input/Output

(-) Driver’s Door Trigger

(-) RAP Off Output: Green/Black

Refer to the Vehicle

connections section for

the corresponding

connector, pin and wire

color of your vehicle.

(-) Ground

(AC) Tach Output: Violet/White

(AC) Tach Input

Do not

connect

D2D Port

1 2 3 4 5

121198 10

Headlight Switch

(black 12-pin connector)

(-) Parking Lights: Pin 3, 5 or 7

Refer to the

Vehicle

connections

section for the

corresponding

connector, pin

and wire color

of your vehicle.

XKD2D65

Vehicle

Ignition

1412

10 42

9403.GM10 4.27 2016 Buick Verano

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

D2D

only

Wiring diagram with T-Harness (THGM610D Rev.3)

THGM610D Rev.3 (Optional T-Harness)

Use connectors

labeled GM10

3-pin

connectors

GM 10 GM 10

NOT USED

Hood Pin

Note: The Hood Pin is only required

on vehicles that are not equipped

with a factory hood pin.

Remote Start Safety

Override Switch

Ignition Switch

(black or white

connector)

Immobilizer

Control Module

(violet connector

under ignition

switch)

Away from

Immobilizer

Control Module

(vehicle side)

Ignition Barrel

(+) 12V

(+) 12V Input

(-) Parking Lights Output

ABC

(MUX) Clutch Output: Violet/Green

(MUX) Clutch Output: Violet/Brown

ONLY required for

manual transmission

applications.

Clutch: Yellow, pin B

Clutch Switch

(black 3-pin connector)

(+) Ignition Input: Pink

(+) Ignition Input/Output

(-) Driver’s Door Trigger

(-) RAP Off Output: Green/Black

Refer to the Vehicle

connections section for

the corresponding

connector, pin and wire

color of your vehicle.

(-) Ground

(AC) Tach Output: Violet/White

(AC) Tach Input

Do not

connect

D2D Port

1 2 3 4 5

121198 10

Headlight Switch

(black 12-pin connector)

(-) Parking Lights: Pin 3, 5 or 7

Refer to the

Vehicle

connections

section for the

corresponding

connector, pin

and wire color

of your vehicle.

6-pin

connectors

T-01

T-02

NOT USED

HS CAN Low: Pin 14

HS CAN High: Pin 6

SW CAN: Pin 1

OBDII Diagnostic

(connector side view)

HS CAN High: Tan/Black

HS CAN Low: Tan

SW CAN: Lt. Green

XKD2D65

Vehicle

Ignition

1412

10 42

10 403.GM10 4.27 2016 Buick Verano

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram

(+) 12V

(+) 12V Input

(-) Parking Lights Output

ABC

(MUX) Clutch Output: Violet/Green: 8

ONLY required for

manual transmission

applications.

Clutch: Yellow, pin B

Clutch Switch

(black 3-pin connector)

(+) Ignition Input/Output

(MUX) Clutch Output: Violet/Brown: 9

(-) RAP Off Output: Green/Black: 2

(AC) Tach Output: Violet/White: 5

123

Immo.

Data: pin 2

Single Wire CAN: Lt. Green: 1

HS CAN Low: Tan: 4

HS CAN High: Tan/Black: 3

HS CAN Low:

Tan or White

pin 14

HS CAN High:

Tan/Black or Blue

pin 6

SW CAN: Green, pin 1

OBDII Diagnostic

(connector side view)

Cut

Immo. Data Interrupt (connector side): Orange/Red: 10

Immo. Data Interrupt (vehicle side): Yellow/Red: 11

(+) 12V Input: Brown: 7

(+) Ignition Output: Yellow: 8

(+) Accessory Output: Gray/Black: 7

Immo. Data (vehicle side): Orange/Black: 11

15432

(+) Ignition: Pin 1

(+) 12V: Pin 2

(+) Accessory: Pin 3

Ignition Switch

(black or white connector)

Immobilizer

Control

Module

(violet 3-pin

connector

below ignition

switch)

(-) Driver

Door Trigger

D2D Port

XKD2D65

(AC) Tach Input

1 2 3 4 5

121198 10

Headlight Switch

(black 12-pin connector)

(-) Parking Lights: Pin 3, 5 or 7

Refer to the

Vehicle

connections

section for the

corresponding

connector, pin

and wire color

of your vehicle.

(-) Ground

Refer to the

Vehicle

connections

section for the

corresponding

connector, pin

and wire color

of your vehicle.

(-) Hood Pin

(-) Hood Status Input

1412

10 42

Andere Handbücher für Directechs DB3

Inhaltsverzeichnis

Andere Directed Autozubehör Handbücher

Directed

Directed Directechs DS3 Bedienungsanleitung

Directed

Directed DS4+ Bedienungsanleitung

Directed

Directed 403.CHRYSLER6 v2.17 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed XPRESSKIT optimax Series Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs HYUNDAI2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 933.SUBARU5 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed FORD9 Bedienungsanleitung

Directed

Directed DS4+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs NISS07 Bedienungsanleitung

Directed

Directed VOXX DEI DS3+ Bedienungsanleitung

Directed

Directed FORD12 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung