Directed Directechs DB3 Bedienungsanleitung

INSTALLATION GUIDE

DB3

2018 Mitsubishi RVR (Smart Key). 403.MIT5 1.06

This product is intended for installation by a professional installer only! Attempts to install this

product by a person other than a trained professional may result in severe damage to a vehicle’s

electrical system and components.

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Wiring diagram 6

Locating components in the vehicle 7

Vehicle connections 8

Module programming 10

Connecting the module 11

LED diagnostics and troubleshooting 12

Soft reset 14

Hard reset 14

Feature programming 15

Feature and option list 16

Limited one year consumer warranty 17

Quick Reference Guide 18

Contents

3403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Introduction

DB3 is an all-in-one door lock and override module.

Warning!

This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs

Mobile application for smartphones. Refer to “Connecting the module” for more information.

4403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Control of aftermarket alarm with OEM remote

* Fuel Level

* Odometer

Immobilizer Bypass-Data No Key Req'd

Remote Start Ready

Remote Start Takeover

SmartStart

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Entry Monitoring Trunk/Hatch Pin

Brake Status (foot brake)

E-Brake Status

Ignition Status

5403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Pre-installation and application warnings

Firmware notes: This section highlights important information for this speciﬁc ﬁrmware and will assist in pricing

accordingly, as well as bringing awareness to any operational or vehicle limitations.

T-Harness

compatible

Keys

required for

programming

1Keys required

for operation 0

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the "Vehicle connections" following the installation diagram.

General notes: This section highlights important information for this speciﬁc ﬁrmware.

[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D. Also please note that by

default, the tach is set to 1000 rpm on hybrid vehicles.

[2] The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin. or if NOT

supported in data.

6403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

D2D Port

(-) Ground (-) Ground

(+) Ignition Output

(+) Accessory Output

(+) Starter Output

(+) 12V Input

HS CAN High 1: Tan/Black: 3

HS CAN Low 1: Tan: 4

1412

10 42

Wiring diagram

(+) Parking Lights Output

XKD2D65

(+) PTS 1 Output: Violet/Brown: 9

(AC) Tach Output: Violet/White: 5

(-) PTS 2 Output: Green/Black: 2

HS CAN High 2: Orange/Green: 5

HS CAN Low 2: Orange/Brown: 6

C-408

(black conn.

at fuse box.)

C-413

(white conn. at fuse box.)

1317

1418

1519

1620

(+) 12V:

Black/Red,

pin 1

(+) Parking Lights:

Pink, pin 13

(+) Parking Lights:

Yellow or Blue, pin 10

(+) PTS 1:

Pink, pin 4

(-) PTS 2:

Blue, pin 2

Start / Stop Switch

(white conn. at push button.)

(+) Starter:

Lt. Blue or Pink, pin 7

C-415

(white conn.

at fuse box.)

CAN-B Low:

Red, pin 7

CAN-B High:

Green, pin 6

C-411

(white an black

conn. at fuse box.)

15 14 13

11 10 9 8

7 6 5 4 3 2 1

(+) Ignition:

White, pin 6

C-417

(white conn. at fuse box.)

C-408

C-413

C-415

C-411

C-417

ETACS / Fuse Box

(connectors at ETACS or fuse box)

17 6 5 4

CAN C High: Blue or Red,

pin 5

CAN C Low:

Pink or

White,

pin 4

(+) Accessory:

Lt. Green or

Green, pin 7

(AC) Tach Input

Diodes

(-) Hood pin Input

7403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Locating components in the vehicle

8403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Vehicle connections

The connection information listed below is specific to the 2018 Mitsubishi RVR (Smart Key). Refer to “Pre-installation and application warnings” for a list of important notes.

Data 14-pin blue connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H1/1 Light Green No Connection No Connection

H1/2 Violet/Yellow No Connection No Connection

H1/3 Tan/Black (DATA) HS CAN 1 High Dash Fuse Box, white 24 pin plug (C-411), pin 5 Data Red (CAN-C)

H1/4 Tan (DATA) HS CAN 1 Low Dash Fuse Box, white 24 pin plug (C-411), pin 4 Data White (CAN-C)

H1/5 Orange/Green (DATA) HS CAN 2 High Dash Fuse Box, white 24 pin plug (C-411), pin 6 Data Green (CAN-B)

H1/6 Orange/Brown (DATA) HS CAN 2 Low Dash Fuse Box, white 24 pin plug (C-411), pin 7 Data Red (CAN-B)

H1/7 Brown Relay N.O. No Connection No Connection

H1/8 Yellow Relay COM No Connection No Connection

H1/9 Orange/Yellow Relay N.C. No Connection No Connection

H1/10 Orange/Red Relay N.C. No Connection No Connection

H1/11 Yellow/Red Relay COM No Connection No Connection

H1/12 Brown/Red Relay N.O. No Connection No Connection

H1/13 Red (+) W2W Only - 12 Volt Dash Fuse Box, black 2 pin plug (C-408), pin 1 + Black/Red (80A)

H1/14 Black (-) W2W Only - Ground (chassis ground)

Output 12-pin red connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H2/1 Black/White (-) W2W Only - E-Brake Output Remote Starter

H2/2 Green/Black (-) PTS 2 Output Engine Start Stop Switch, white 10 pin plug, pin 2 - Blue

H2/3 Green/White (-) W2W Only - Door Output Remote Starter

H2/4 Red/Black (-) W2W Only - Trunk Output Remote Starter

H2/5 Violet/White (AC) W2W Only - Tach Output [1] Remote Starter

H2/6 Gray (+) W2W Only - Brake Output Remote Starter

H2/7 Gray/Black No Connection No Connection

H2/8 Violet/Green No Connection No Connection

H2/9 Violet/Brown (+) PTS 1 Output Engine Start Stop Switch, white 10 pin plug, pin 4 + Pink

H2/10 Yellow/Black No Connection No Connection

H2/11 Orange/Black No Connection No Connection

H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter

Input 10-pin black connector (H3)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H3/1 Green (-) Lock Input Remote Starter

9403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H3/2 Blue (-) Unlock Input Remote Starter

H3/3 Red/White No Connection No Connection

H3/4 White/Violet No Connection No Connection

H3/5 Violet/Black No Connection No Connection

H3/6 White/Black No Connection No Connection

H3/7 Pink/White No Connection No Connection

H3/8 Violet No Connection No Connection

H3/9 Pink No Connection No Connection

H3/10 Blue/White (-) Ground When Running (Status) Input Remote Starter

D2D 4-pin white connector (H4)

Module

Conn./Pin Color Description

H4/1 Green (Data) TX

H4/2 Black (-) Ground

H4/3 Blue (Data) RX

H4/4 Red (+) 12 Volt

RF 2-pin white connector (H5)

Module

Conn./Pin Color Description

H5/1 N/A No Connection

H5/2 N/A No Connection

Additional remote start connections

(Not all of these connections may be required for your installation. Refer to the wiring diagram for vehicle-specific connections.)

Wire Connects To

Wire Location (+/-) Wire Color

12 Volts Dash Fuse Box, black 2 pin plug (C-408), pin 1 + Black/Red (80A)

Accessory Dash Fuse Box, white 15 pin plug (C-417), pin 7 + Green

Hood Pin Dash Fuse Box, white 16 pin plug (C-410), pin 12 - Pink

Ignition Dash Fuse Box, white 15 pin plug (C-417), pin 6 + White

Parking Lights - Must use a diode Dash Fuse Box, white 20 pin plug (C-413), pin 10 (L);

pin 13 (R)

+ Blue (L); Pink (R)

Starter Dash Fuse Box, white 19 pin plug (C-415), pin 7 + Pink

Tachometer Any Fuel Injector, gray 2 pin plug, pin 2 AC Lt. Green, Yellow, Green, or White

10 403.MIT5 1.06 2018 Mitsubishi RVR (Smart Key)

Module programming

Refer to “LED diagnostics and troubleshooting” for more information and for troubleshooting purposes.

1Wait until the LED turns ON solid red.

2Press on the Push-To-Start (PTS) button twice to turn the ignition ON.The LED flashes

orange.

3Wait until the LED turns ON solid green for 3 seconds, then turns OFF.

4Press the PTS button once more to turn the ignition OFF.

You have successfully completed the module programming sequence.

Andere Handbücher für Directechs DB3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Directed Autozubehör Handbücher

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 403.SUBARU1 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 403.CHRYSLER6 v2.17 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed VOXX DEI DS3+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed VOXX DEI 933.VW14 v2.11.198.12 Bedienungsanleitung

Directed

Directed Directechs HYUNDAI2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 403.GM4 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed 403.NISS4HT 2.39 RSR Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung