dirwin Seeker Bedienungsanleitung
Ver. 1.20
Welcome to follow Dirwin's page on Facebook.
Learn more promotion information and watch our new
videos on https://www.facebook.com/qr/108860221504902.
Timely Giveaways Available on Facebook!
1
About Manual
This manual contains many Warnings and Cautions concerning the safe operation and
consequences if safe setup, operation and maintenance are not performed. All information
in this manual should be carefully reviewed and if you have any questions you should
contact Dirwin Bike immediately. The notes, warnings and cautions contained within the
manual and marked by this triangular Caution Symbol should also be given special care.
Users should also pay special attention to information marked in this manual beginning
with NOTICE.
Because it is impossible to anticipate every situation or condition which can occur while riding, this manual makes
no representations about the safe use of bicycles under all conditions. There are risks associated with the use of
any bicycle which cannot be predicted or avoided, and which are the sole responsibility of the rider. You should
keep this manual, along with any other documents that were included with your bicycle, for future reference,
however all content in this manual is subject to change or withdrawal without notice. Visit www.dirwinbike.com to
download the latest version.Dirwin Bike makes every effort to ensure accuracy of its documentation and assumes
no responsibility of liability if any errors or inaccuracies appear within. Assembly and first adjustment of your
Dirwin Bike requires special tools and skills and it is recommended that this should be done by a trained bicycle
mechanic if possible.
！
2
tips for owners. Read it carefully and familiarize yourself with the Dirwin Seeker before using it to ensure safe use
This manual includes details of the product, and information on its operation and maintenance and other helpful
and prevent tragic accidents. Be sure to retain this manual as your convenient Dirwin Seeker information source.
Product Specification
Battery Front Fork Alloy Front Suspension Fork
Motor 750W Motor Bike Frame A6061 ALUMINUM TIG WELDED
FRAME
Display Colored LCD Display Brake 180mm Hydraulic Disc Brakes
Derailleur 7-speed Shimano-Altus-7 Speed Charger US Standard 2.0A Smart Charger
Speed Max. 22MPH Freewheel Shimano 7 Speed
Range 35 Miles (No Pedaling) ~ 55 Miles
(With Pedal Assist) Saddle Soft Saddle
Pedal Assist Intelligent 5 Level Pedal Assist Shifter SHIMANO 7S
Throttle Half Twist Throttle Tires 26" x 4" Fat Tire
Charging Time 6 ~ 9 Hours Product Weight 74.9 Ibs
Recommended
Rider Heights 5.3" ~ 6.4" Total Payload
Capacity 350 Ibs
3
48v 16Ah Lithium Battery
Handle
On/o Switch
Bell Display Shifter
Brake
Throttle
Head light
Front fork
Front brake
Pedal Controller Rear derailleur
Tire
Rear brake
Mud slab
Taillight
Cargo Rack
Saddle
Frame
Battery
4
Maximum Load Capacity
350 lbs
Tires
26" ×4"
Min / Max Seat Height
29.5" ~ 40.2"
Total Length
74.8"
Motor
750w
Wheelbase
45.3"
Handlebar Reach
46.1"
Safety Checklist
NOTICE: Before every ride it is important to carry out the following safety checks.
5
Safety Check Basic Steps
Brakes
1. Ensure front and rear brakes work properly.
2. Ensure brake pads are not over worn and are correctly positioned in relation to the rims.
3. Ensure brake control cables are lubricated, correctly adjusted and display no obvious wear.
4. Ensure brake control levers are lubricated and tightly secured to the handlebars.
Wheels and Tires
1. Ensure tires are inflated to within the recommended limits displayed on the tire sidewalls.
2. Ensure ties have tread and have no BULGES OR EXCESSIVE WEAR.
3. Ensure rims run true and have no obvious wobbles or kinks.
4. Ensure all wheel spokes are tight and not broken.
Steering 1. Ensure handlebar and stem are correctly adjusted and tightened, and allow proper steering.
2. Ensure the handlebar is set correctly in relation to the forks and the direction of travel.
Chain 1. Ensure the chain is oiled, clean and runs smoothly.
2. Extra care is required in wet or dusty conditions.
Cranks and Pedals 1. Ensure pedals are securely tightened to the cranks.
2. Ensure the cranks are securely tightened and are not bent.
Derailleurs
1. Check that the derailleur(s) are adjusted and functioning properly.
2. Ensure shift and brake levers are attached to the handlebar securely.
3. Ensure all brake and shift cables are properly lubricated.
Motor Drive Assembly
and Throttle
1. Ensure hub motor is spinning smoothly and the motor bearings are in good working order.
2. Ensure all power cables running to hub motor are secured and undamaged.
3. Make sure the hub motor axle bolts are secured and all torque arms and torque washers are in
place.
Battery Pack
1. Ensure battery is charged before use.
2. Ensure there is no damage to battery pack.
3. Lock battery to frame and check to see that it is secured.
6
Assembly Instructions
Step 1 : Install the handle bars. Remove the four screws from the stem, ensuring the linear markings on the handlebars are
centered and handlebars are adjusted to the comfortable position. Finally, tighten the screws with the assembly tool.
Step 2 : Install the headlight. Use a socket wrench to hold the nut and loosen the screw with a screwdriver and remove the screw.
Install the screw passing through the headlight and the bracket and adjust the headlight properly for riding conditions.
Step 3 : Install the front wheel. Remove the plastic axle guards from the front wheel being sure not to touch the brake rotor set.
Open the quick skewer and remove the thumb nut and cone spring. Carefully lower the fork and ensure the brake rotor
goes into the caliper. Next align the dropouts with the axle of the wheel hub to make sure the fork dropouts are fully
seated on the axle. Install the quick skewer starting from the brake rotor side of the wheel and then push quick release
skewer through the hub. Keep two cone springs pointed towards the wheel hub. Tighten the thumb nut until the quick
release lever is held in line with the axle, and then use the palm of your hand to close the quick release skewer.
7
NOTICE: The following assembly steps are only a general guide to assist in the assembly of your Dirwin Bike and is not
a complete or comprehensive manual of all aspects of assembly, maintenance and repair. We recommend you consult
a certified bicycle mechanic to assist in the assembly, repair and maintenance of your bicycle. For detailed instructions
please view the Dirwin Seeker Assembly video and Quick Release Installation video found at www.dirwinbike.com.
Step 4 : Use a bike pump with a press gauge to Inflate tires to desired PSI. The recommended pressure for this mode is 20 PSI
(1.379 Bar). Do not overinflate or underinflate tires.
Step 5 : Install the pedals. The left and right pedals are marked on both ends. First, install the right pedal by tightening the pedal
in clockwise direction. The left pedal is tightened by turning the pedal in counterclockwise direction. Both pedals should
be tightened to 35 Newton meters by using a torque wrench.
Step 6 : Adjust the saddle height. loosen the seat clamp, remove the seat post and ensure the seat clamp is centered over the
hole in the seat tube. Insert the seat post into the slot, adjust the saddle height to a suitable height and tighten the
adjustment nut. When you feel resistance, close the seat tube clamp fully.
8
Step 7 : Adjust the seat position forwards or backwards. Use an allen wrench to loosen the seat adjustment bolt and make sure to
key and turn to release the battery pack. The battery pack can be removed and charged separately. This is the charging
port. Align the battery pack to the battery holder carefully and push until when you hear it click into the place.
NOTICE: Ensure all hardware is tightened properly and all safety checks in the following sections are
performed before first use. Contact Dirwin Bike if you have any questions regarding the assembly of your
bike. If you are not able to ensure all the assembly steps in the assembly video are performed properly, or
you are unable to view the assembly video please consult a certified local bicycle service provider for
assistance in addition to contacting Dirwin Bike for help.
Recommended Torque Values
Hardware Location Torque Required (Nm)
Handlebar 18-20
Stem 18-20
Saddle 18-20
Front Wheel (For Bikes with Bolt on Front Wheel) 16-25
9
stay within the marked adjustment range.
Step 8 : Install the optional rear rack. Align the holes in the rear rack with the holes in the frame and tighten with screws.
Step 9 : Check that battery pack is locked into the frame of the Dirwin Seeker. When you want to take off the battery, insert the
Inhaltsverzeichnis
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung