DITEC TS35 Bedienungsanleitung

Ditec TS35

Automation for swing gates

(Translation of the original instructions)

Technical Manual

IP2373EN • 2022-02-14

Last version of this manual

www.ditecautomations.com

IP2373EN

Key

This symbol indicates instructions or notes regarding safety, to which special atten-

tion must be paid.

This symbol indicates useful information for the correct operation of the product.

Contents

General safety precautions ..................................................................................................3

EC Declaration of Incorporation ..................................................................................................5

1. Technical specifications ..................................................................................................6

1.1 Machinery Directive ..................................................................................................6

1.2 Gearmotor dimensions ..................................................................................................7

2. Standard installation ..........................................................................................8

3. Installation ..........................................................................................................9

3.1 Preliminary checks ..................................................................................................9

3.2 Fastening the brackets ..................................................................................................10

3.3 Electrical connections ..................................................................................................12

4. Release instructions ..................................................................................................13

5. Routine maintenance plan ..................................................................................................13

6. Troubleshooting ......................................................................................................14

7. Disposal .......................................................................................................14

IP2373EN

This installation manual is intended for qualified personnel only •Instal-

lation, electrical connections and adjustments must be performed by

qualified personnel, in accordance with Good Working Methods and in

compliance with the current regulations • Read the instructions carefully

before installing the product. Wrong installation could be dangerous •

Before installing the product, make sure it is in perfect condition •

The packaging materials (plastic, polystyrene, etc.) should not

be discarded in the environment or left within reach of children,

as they are a potential source of danger • Do not install the product

in explosive areas and atmospheres: the presence of inflammable

gas or fumes represents a serious safety hazard • Make sure that

the temperature range indicated in the technical specifications is

compatible with the installation site • Before installing the motori-

zation device, make sure that the existing structure, as well as all the

support and guide elements, are up to standards in terms of strength

and stability. Verify the stability and smooth mobility of the guided

part, and make sure that no risks of fall or derailment subsist. Make

all the necessary structural modifications to create safety clearance

and to guard or isolate all the crushing, shearing, trapping and ge-

neral hazardous areas • The motorization device manufacturer is

not responsible for failure to observe Good Working Methods when

building the frames to be motorized, or for any deformation during

use • The safety devices (photocells, safety edges, emergency stops,

etc.) must be installed taking into account the applicable laws and

directives, Good Working Methods, installation premises, system

operating logic and the forces developed by the motorized door or

General safety precautions

ATTENTION! Important safety instructions.

Please follow these instructions carefully. Failure to observe

the information given in this manual may lead to

severe personal injury or damage to the equipment.

Keep these instructions for future reference.

This manual and those for any accessories can be

downloaded from www.ditecautomations.com.

IP2373EN

gate • The safety devices must protect against crushing, cutting,

trapping and general danger areas of the motorized door or gate.

Display the signs required by law to identify hazardous areas. Each

installation must bear a visible indication of the data identifying the

motorized door or gate • Before connecting the power supply, make

sure the plate data correspond to those of the mains power supply.

An omnipolar disconnection switch with a contact opening distance

of at least 3mm must be fitted on the mains supply. Check that the-

re is an adequate residual current circuit breaker and a suitable

overcurrent cutout upstream of the electrical installation in accor-

dance with Good Working Methods and with the laws in force • When

requested, connect the motorized door or gate to an effective earthing

system that complies with the current safety standards • Before

commissioning the installation to the end user, make sure that the

automation is adequately adjusted in order to satisfy all the functio-

nal and safety requirements, and that all the command, safety, and

manual release devices operate correctly •

During installation, maintenance and repair operations, cut

off the power supply before opening the cover to access the

electrical parts • The protection cover of the operator must be

removed by qualified personnel only.

The electronic parts must be handled using earthed antista-

tic conductive arms. The manufacturer of the motorization

declines all responsibility if component parts not compatible with

safe and correct operation are fitted • Only use original spare parts

for repairing or replacing products • The installer must supply all

information concerning the automatic, manual and emergency

operation of the motorized door or gate, and must provide the user

with the operation and safety instructions.

IP2373EN

EC Declaration of Incorporation

We:

ASSA ABLOY Entrance Systems AB

Lodjursgatan 10

SE-261 44 Landskrona

Sweden

Declare under our sole responsibility that the type of equipment with name:

Ditec TS35AC Automation for swing gates

Comply with the following directives and their amendments:

2006/42/EC Machinery Directive (MD) for the following essential health and safety

requirements: 1.1.2, 1.1.3, 1.2.1, 1.2.2, 1.2.3, 1.2.4.2, 1.2.6, 1.3.9, 1.4.3, 1.7.2,

1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2.

2014/30/EU Electromagnetic Compatibility Directive (EMCD)

2011/65/EU Restriction of hazardous substances (RoHS 2)

2015/863/EU Restriction of hazardous substances (RoHS 2 Amendment)

Harmonized European standards that have been applied:

EN 61000-6-3:2007 + A1:2011 + AC:2012

EN 60335-1:2012 + AC:2014 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019

Other standards or technical speciﬁcations that have been applied:

IEC 60335-1:2010 + C1:2010 + C2:2011 + A2:2013 + C1:2014 + A2:2016 + C1:2016

EN 12453:2017

The manufacturing process ensures the compliance of the equipment with the technical ﬁle.

The equipment must not be used until the ﬁnal installed automatic entrance system has been

declared in compliance with the Machinery Directive 2006/42/EC.

Responsible for technical ﬁle:

Matteo Fino

Business Area PGA

Ditec S.p.A.

Largo U. Boccioni, 1

21040 Origgio (VA)

Italy

Signed for and on behalf of ASSA ABLOY Entrance Systems AB by:

Place Date Signature Position

Origgio 2022-02-14 Matteo Fino President B.A. PGA

Mat

teo

IP2373EN

1. Technical specifications

Usage limits (gate wing weight and width)

100

150

200

250

300

350

400

450

(m)

(Kg)

2,51,5 3 3,5

To prevent forced entry, the use of an elec-

tric lock is recommended with gate wings

measuring more than 2.5 m in length.

Power supply 230 V~ - 50 / 60 Hz

Max absorption 1,5 A

Power absorbed 330 W

Capacitor 8 µF

Max thrust 3500 N

Maximum stroke 400 mm

Opening time 18-22 s / 90°

Intermittence S2= 10min / S3= 30%

Lifespan 100000 cycles

Operating temperature -20°C / +55°C

Degree of protection IP33

Dimensions (mm) 1182x93x174

Weight (kg) 4,00

1.1 Machinery Directive

Pursuant to the Machinery Directive (2006/42/EC), the installer who motorises a door or gate has

the same obligations as the manufacturer of machinery and as such must:

- prepare the technical data sheet which must contain the documents indicated in Annex V of the

Machinery Directive;

- (the technical data sheet must be kept and placed at the disposal of competent national author-

ities for at least ten years from the date of manufacture of the motorised door or gate);

- draw up the EC Declaration of Conformity in accordance with Annex II-A of the Machinery Di-

rective and deliver it to the customer;

- affix the EC marking on the motorised door or gate, in accordance with point 1.7.3 of Annex I of

the Machinery Directive.

IP2373EN

1.2 Gearmotor dimensions

124 7,5

1141

1182

617 402

35 7,5

ø10,4

ø10

90 50

ø12,4

130

115

ø12

IP2373EN

2. Standard installation

Ref. Description Cable

1Transmitter /

2Flashing light 2 x 1mm²

Antenna (integrated in the flashing light)

RG58 50Ω

3Key selector switch 4 x 0,5mm²

Digital combination wireless keypad /

4Actuator 4 x 1,5mm²

5Photocells 4 x 0,5mm²

6Control panel 3G x 1,5 mm²

Connect the power supply to a type-approved omnipolar switch (not supplied), with a

contact opening distance of at least 3mm. Connection to the mains must be via an independent channel,

separated from the connections to the command and safety devices.

Left wing (TS35ACS) Right wing (TS35ACD)

iThe gearmotors are left and right and are different from each other.

IP2373EN

3. Installation

The declared operating and performance features can only be guaranteed with the use of Ditec

accessories and safety devices.

3.1 Preliminary checks

Make sure the gate structure is sturdy and the hinges are lubricated and smooth.

Install a stop in the open and closed positions (the mechanical structural elements must be com-

pliant with the requirements of the standard EN12604).

Check that the installation measurements are correct in relation to the distance between the

hinge of the wing and the corner of the pillar [C] and the desired opening angle [D].

The automation fastening point varies according to the space available and the gate

to be automated. The installer must therefore choose the best solution to ensure

that the system works correctly in each individual situation.

The installation measurements indicated in the table allow you to choose the values of [A] and [B] on

the basis of the required opening angle and in relation to the on-site spaces and overall dimensions.

Increasing measurement [A], you reduce the opening approach speed.

Reducing measurement [B], you increase the gate opening angle.

Measurements [A] and [B] must, however, be compatible with the effective piston stroke

Tab. 3.1

A B C S D E L P min

150 130 15 115 110°

46 1120

170

160 120 30 90 105° 180

160 160 45 115 100° 180

100 165 50 115 90° 120

130 160 70 90 95° 150

120 200 85 115 95° 140

150 200 85 115 90° 170

130 190 100 90 95° 150

130 220 105 115 90° 150

min 60 with 90° opening

P min

Unless otherwise specified, all measurements are expressed in mm.

IP2373EN

3.2 Fastening the brackets

- Fasten the tail bracket , en-

suring that the measurements

[A] and [B] are correct for the

desired opening angle [D] (see

tab. 3.1).

400mm min

screws M10 - not

supplied

- Fasten the piston to the tail

bracket with the pin Fin-

cluded.

- With the gate closed, extend the actuator tube completely 3, unscrewing it to reach its maxi-

mum length, and then re-tighten by one complete turn as shown in the figure.

10mm

OPEN

STOP!

15mm

STOP!

1 x 360°

Andere Handbücher für TS35

Inhaltsverzeichnis

Andere DITEC Toröffner Handbücher

DITEC

DITEC FACIL3EH E2H Bedienungsanleitung

DITEC

DITEC DAS107PLUS Bedienungsanleitung

DITEC

DITEC SOF Bedienungsanleitung

DITEC

DITEC CROSS18 Bedienungsanleitung

DITEC

DITEC TRAFFIC C Benutzerhandbuch

DITEC

DITEC CROSS35 Bedienungsanleitung

DITEC

DITEC DOR Bedienungsanleitung

DITEC

DITEC OBBI Bedienungsanleitung

DITEC

DITEC PWR25H Bedienungsanleitung

DITEC

DITEC CS 61E Handbuch

DITEC

DITEC OBBI3BH Bedienungsanleitung

DITEC

DITEC ENTREMATIC SMART RESET Benutzerhandbuch

DITEC

DITEC Cross14 Handbuch

DITEC

DITEC FACIL3EH E2H Bedienungsanleitung

DITEC

DITEC SECTOR RESET Bedienungsanleitung

DITEC

DITEC Arc Series Handbuch

DITEC

DITEC CROSS7E Bedienungsanleitung

DITEC

DITEC DAB305 Handbuch

DITEC

DITEC 0DT872 Benutzerhandbuch

DITEC

DITEC GLOBE IP1839 Handbuch

DITEC

DITEC VIVAH Bedienungsanleitung

DITEC

DITEC CUBIC6 E2 Bedienungsanleitung

DITEC

DITEC E2 Bedienungsanleitung

DITEC

DITEC E1HBOX Bedienungsanleitung

Beliebte Toröffner Handbücher anderer Marken

CAME

CAME FROG-PM4 Bedienungsanleitung

SOMFY

SOMFY FX230 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Bedienungsanleitung

Turnstiles

Turnstiles FSW 900 Bedienungsanleitung

Erreka

Erreka BUL BL33 Betriebsanleitung

Erreka

Erreka VULCAN S Bedienungsanleitung

Beninca

Beninca R1-2 WBV Bedienungsanleitung

Erreka

Erreka VULCAN D Bedienungsanleitung

Motorline professional

Motorline professional FORT Bedienungsanleitung

Beninca

Beninca BOB5024 Bedienungsanleitung

AGA

AGA GATEMASTER 900 HD Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Westfalia

Westfalia 85 27 06 Bedienungsanleitung

CAME

CAME F500 Bedienungsanleitung

Extel

Extel VERA Bedienungsanleitung

Comunello Automation

Comunello Automation ABACUS 220 Bedienungsanleitung

CAME

CAME FA40230CB Bedienungsanleitung

Mighty Mule

Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Bedienungsanleitung