Dji Inspire 1 Bedienungsanleitung

INSPIRE 1

V1.8

2015.9

User Manual

Using this manual

Legends

Warning Important Hints and Tips Reference

Before Flight

The following tutorials and manuals have been produced to ensure you to make full use of your Inspire 1.

1.Disclaimer

2.In the Box

3.Inspire 1 Quick Start Guide

4.Safety Guidelines

5.Inspire 1 User Manual

6.Intelligent Flight Battery Safety Guidelines

Watching all the tutorial videos and reading the Disclaimer before ight is recommended. Afterwards,

prepare for your first flight by using the Inspire 1 Quick Start Guide. Refer to this manual for more

comprehensive information.

Watch the video tutorials

Please watch the tutorial video below to learn how to use Inspire 1 correctly and safely:

www.dji.com/product/inspire-1/video

Download the DJI GO app

Download and install the DJI GO app before use. Scan the QR code or visit

“http://m.dji.net/djigo” to download the app.

For the best experience, use mobile device with Andriod V 4.1.2 or above. Requires iOS 8.0 or later.

Contents

Using this manual 2

Legends 2

Before Flight 2

Watch the video tutorials 2

Download the DJI GO app 2

Product Prole 5

Introduction 6

Feature Highlights 6

Assemble the Aircraft 6

Aircraft Diagram 9

Remote Controller Diagram 9

Aircraft 11

Flight Controller 12

Flight Mode 12

Flight Status Indicator 12

Return to Home (RTH) 13

Dynamic Home Point 15

Vision Positioning System 16

Flight Recorder 17

Attaching and Detaching the Propellers 17

DJI Intelligent Flight Battery 18

Remote Controllers 23

 RemoteControllerProle 24

Remote Controller Operations 24

Dual Remote Controllers Mode 29

Remote Controller Status LED 31

Linking the Remote Controller 32

Remote Controller Compliance Version 33

Gimbal and Camera 34

 CameraProle 35

Gimbal 36

DJI GO App 39

Camera 40

Library 43

Explore 43

Me 43

Flight 44

Flight Environment Requirements 45

Flight Limits and Flight Restriction Area 45

 PreightChecklist 49

Calibrating the Compass 49

Auto Take-off and Auto Landing 50

Starting/Stopping the Motors 51

Flight Test 51

FAQ 53

Appendix 56

 Specications 57

Intelligent Flight 60

How to Update Firmware 61

FCC Compliance 62

Product Prole

This chapter describes the features of

Inspire 1, instructs you to assemble the

aircraft and explains the components on

the aircraft and remote controllers.

Product Profile

Product Prole

Introduction

The Inspire 1 is brand new quadcopter capable of capturing 4K video and transmitting an HD video

signal (up to 2km) to multiple devices straight out of the box. Equipped with retractable landing gear, it

can capture an unobstructed 360 degree view from its camera. The built-in camera has an integrated

gimbal to maximize stability and weight efficiency while minimizing space. When no GPS signal is

available, Vision Positioning technology provides hovering precision.

Feature Highlights

Camera and Gimbal: Up to 4K video recording and 12 megapixel photo capture. Reserved mounting

space for ND filters for better exposure control. New quick-release mount allows you to remove the

camera with ease.

HD Video Downlink: Low latency, HD downlink powered by an enhanced version of the DJI Lightbridge

system. It also provides dual controllers mode.

Landing gear: Retractable landing gear that enables an unobstructed panoramic view from the camera.

DJI Intelligent Flight Battery: 4500 mAh DJI Intelligent Flight Battery employs new battery cells and a

battery management system.

Flight Controller: The next generation ight controller system provides a more reliable ight experience.

A new ight recorder stores the ight data from each ight, and Vision Positioning enhances hovering

precision when no GPS is available.

Assemble the Aircraft

Unlocking Travel Mode

The aircraft is in Travel Mode during delivery. Follow these steps to change it to Landing Mode before

your rst ight:

1. Insert the Intelligent Flight Battery into the battery compartment.

2. Power on the Remote Controller and the Intelligent Flight Battery.

3. Toggle the Transformation Switch up and down at least four times.

4. Power off the aircraft.

Travel Mode Toggle×4 Landing Mode

Product Profile

INSPIRE 1 User Manual

Battery must be fully charged before using it for the rst time. Refer to "Charging the Intelligent

Flight Battery" (P21) for more information .

If you have purchased the dual remote controller version, you must use the Master remote

controller to deactivate Travel Mode. Refer to "Setting Up Dual Remote Controllers Mode" (P30)

section for more infromation about Master remote controller.

Be sure to remove the gimbal from the aircraft before switch from Landing Mode to Travel Mode.

Place the aircraft on the smooth and reective surface (e.g. table or tile) before switching between

the travel modes to the landing mode. Do not place the aircraft on the rough and sound-absorbing

surface (e.g. carpet) before switching between the travel modes and landing mode.

Installing Gimbal and Camera

1. Remove Gimbal Cover.

2. Rotate the Gimbal Lock to the unlocked position (to the right when facing the nose of the aircraft).

3. Insert the gimbal by aligning the white mark on the Gimbal.

4. Rotate the Gimbal Lock back into the locked position.

Ensure the Micro-SD card is correctly inserted into the camera.

Locked

Gimbal Connector

Mounting Place

Gimbal Lock

Gimbal Cover

Attaching Propellers

Attach propellers with the black nut onto motors with the black dot and spin counter-clockwise to secure.

Attach propellers with gray nut onto motors without a black dot and spin clockwise to secure.

Product Profile

INSPIRE 1 User Manual

Place all propellers onto the correct motor and tighten by hand to ensure security before ight.

Preparing Remote Controller

Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown.

1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust it to t then attach

your mobile device.

2. Connect your mobile device to the remote controller with a USB cable.

3. Plug one end of the cable into your mobile device, and the other end into the USB port on the back of

the remote controller.

Attaching 1345s Quick-Release Propellers

The 1345s Quick-Release propeller is the upgrade version of the propellers that greatly enhance the

reliability of the propeller during the ight. Following the steps below to attach the 1345s Quick-Release

propellers.

1. Install the propellers with a white dot onto the mounting plates that have a white dot, and install the

propellers without a white dot onto the mounting plates that do not have a white dot.

2. Align the hook (A) on the propellers with the securing spring (B), then press down the propeller onto

the mounting plate then rotate the propellers according to the lock direction until it is secured.

Without

white dot

Without white dot

White dot

Product Profile

INSPIRE 1 User Manual

Aircraft Diagram

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10 ]

[11 ]

[12 ]

[13 ]

GPS

Propeller (P17)

Motor

Front LED (P12)

Landing gear

Gimbal and Camera (P35)

Intelligent Flight Battery (P18)

Aircraft Micro-USB Port

Rear LED (P12)

Camera Micro-USB Port

Camera Micro-SD Card Slot (P35)

Vision Positioning Sensors (P16)

Aircraft Status Indicator (P13)

[12]

[13]

Remote Controller Diagram

[1] Antennas (P29)

Relays aircraft control and video signal.

[2] Mobile Device Holder

Mounting place for your mobile device.

[3] Control Stick

Controls aircraft orientation.

[4] Return Home (RTH) Button (P13)

Press and hold the button to initiate Return to

Home (RTH).

[5] Transformation Switch (P27)

Toggle the switch up or down to raise or lower

the landing gear.

[1]

[2]

[4]

[5]

[6]

[7]

[8]

[9]

[3]

[7]

[8]

[11]

[9]

[10]

[1]

[2]

[3]

[4]

[5]

[6]

Product Profile

INSPIRE 1 User Manual

[6] Battery Level LEDs

Displays the current battery level.

[7] Status LED

Displays the power status.

[11]

[12]

[16] [17] [18] [19]

[10]

[13]

[14]

[15]

[8] Power Button

Used to power on or power off the remote controller.

[9] RTH LED

Circular LED around the RTH button displays RTH status.

[10] Camera Settings Dial

Turn the dial to adjust camera settings.

Only functions when the remote controller is

connected to a mobile device running the DJI

GO app.

[11] Playback Button

Playback the captured images or videos.

[12] Shutter Button

Press to take a photo. If in burst mode, the

set number of photos will be taken with one

press.

[13] Flight Mode Switch

Used to switch between P, A and F mode.

[14] Video Recording Button

Press to start recording video. Press again to

stop recording.

[15] Gimbal Dial

Use this dial to control the tilt of the gimbal.

[16] Mini-HDMI Port

Connect an HD compatible monitor to this

port to get a live HD video preview of what the

camera sees.

[17] Micro-USB Port

For connecting the remote controller to your

computer.

[18] CAN Bus Port

Reserved for future use.

[19] USB Port

Connect to mobile device to access all of the

DJI GO app controls and features.

[20]

[21]

[22]

[23]

[20] GPS Module

Used to pinpoint the location of the remote

controller.

[21] Back Left Button

Customizable button in DJI GO app.

[22] Power Port

Connect to a power source to charge the

remote controller’s internal battery.

[23] Back Right Button

Customizable button in DJI GO app.

Andere Handbücher für Inspire 1

Inhaltsverzeichnis

Andere dji Quadcopter Handbücher

dji

dji PHANTOM 3 4K Bedienungsanleitung

dji

dji Flamewheel F450 Bedienungsanleitung

dji

dji Matrice 600 Pro Bedienungsanleitung

dji

dji MAVIC PRO Bedienungsanleitung

dji

dji Phantom 3 Advanced Bedienungsanleitung

dji

dji Matrice 100 Bedienungsanleitung

dji

dji INSPIRE 2 Bedienungsanleitung

dji

dji PHANTOM 4 Bedienungsanleitung

dji

dji MAVIC 2 PRO Bedienungsanleitung

dji

dji MAVIC 2 PRO Bedienungsanleitung

dji

dji SPARK Bedienungsanleitung

dji

dji Phantom 2 Vision + Bedienungsanleitung

dji

dji Phantom 2 Vision + Bedienungsanleitung

dji

dji PHANTOM 3 PROFESSIONAL Bedienungsanleitung

dji

dji Spreading WingsS800 EVO Bedienungsanleitung

dji

dji MAVIC PRO Bedienungsanleitung

dji

dji INSPIRE 2 Bedienungsanleitung

dji

dji Matrice 100 Installations- und Betriebsanleitung

dji

dji PHANTOM 4 Bedienungsanleitung

dji

dji S?1000 Bedienungsanleitung

dji

dji Phantom 2 Vision + Bedienungsanleitung

dji

dji MATRICE 600 Bedienungsanleitung

dji

dji PHANTOM Gebrauchsanweisung

dji

dji Flamewheel F450 Bedienungsanleitung

Beliebte Quadcopter Handbücher anderer Marken

Autel Robotics

Autel Robotics EVO II Dual 640T Bedienungsanleitung

Carson

Carson X4 NANO Bedienungsanleitung

Attop

Attop W80 Bedienungsanleitung

Alias

Alias 6608 Bedienungsanleitung

Reely

Reely Drone Copter 2-in-1 Bedienungsanleitung

Hubsan

Hubsan FPV X4 H107D Bedienungsanleitung

Falcon

Falcon S2-210 Bedienungsanleitung

Kaiser Baas

Kaiser Baas KBA15007 Bedienungsanleitung

Denver Electronics

Denver Electronics DCH-261 Bedienungsanleitung

Craig

Craig INTERCEPTOR Bedienungsanleitung

Odyssey

Odyssey TURBO RUNNER Bedienungsanleitung

IMAGINARIUM

IMAGINARIUM droni stream Bedienungsanleitung

Hubsan

Hubsan X4 Pro FPV Bedienungsanleitung

AR.Drone

AR.Drone Parrot VSM Bedienungsanleitung

Walkera

Walkera QR X900 Bedienungsanleitung

HobbyZone

HobbyZone Zugo Bedienungsanleitung

Ares

Ares RECON FPV Bedienungsanleitung

Skycat

Skycat XS Bedienungsanleitung

dji Inspire 1 Bedienungsanleitung

Beliebte Quadcopter Handbücher anderer Marken