DMP Electronics 893A Bedienungsanleitung

893A DUAL PHONE LINE MODULE

Installation Guide

DESCRIPTION

The 893A is a dual telephone line

supervision module that allows

DMP Panels to indicate a phone line

failure to the premises and central

station, and switch to secondary

phone line communication when

the primary line is down.

Compatibility

• The 893A is compatible with

XR150/XR550 Series Panels.

What is Included?

• 7-wire Harness

• Hardware pack

1INSTALL THE MODULE

Caution: Ground yourself before handling the panel. Touch any

grounded metal, such as the enclosure, before touching the

panel to discharge static. After grounding yourself, remove all

power from the panel. Remove all AC and Battery power from

the panel before installing or connecting any modules, cards, or

wires to the panel.

The 893A Module snaps into one of the enclosure 3-hole

mounting locations and connects to any compatible panel using

a 7-conductor harness and a 2-foot phone cord. Follow the

instructions below and refer to Figure 2 to install the 893A:

1. Mount the plastic standos to the enclosure three-hole

mounting locations using three Phillips head screws.

2. Insert the screws from the enclosure outside through the

holes and into the plastic stando that mounts on the

enclosure inside and tighten.

3. Gently snap the 893A onto the standos.

4. Use the supplied 7-wire harness to connect 893A connector

to the panel connector.

5. Use the supplied phone cord to connect the 893A modular

connector labeled panel to the panel phone jack

6. Connect the main and backup phone lines to the Main and

Backup modular connectors on the 893A.

Figure 1: 893A

Figure 2: 893A with RJ and 7-wire Harness Connections

XR550 Series Panel

893A Dual

Phone Line

Module

To Telco Line

Use supplied phone

cord to connect

Use supplied

7-wire harness

to connect

D893A connector

EPanel connector

Designed, engineered, and

manufactured in Springﬁeld, MO

using U.S. and global components.

LT-0135 1.03 20154

893A

Speciﬁcations

Operating Voltage 12 VDC from the panel

Current Draw 35.5 mA Normal Operation

110 mA Processor Fail Buzzer On

The maximum telephone line impedance is 100 Ohms.

Certiﬁcations

FCC Part 15

FCC Part 68 Registration ID CCKUSA-18660-AL-R

California State Fire Marshal (CSFM)

New York City (FDNY)

Underwriters Laboratory

UL 864 Fire-Protective Signaling Systems

INTRUSION • FIRE• ACCESS• NETWORKS

2500 North Partnership Boulevard

Springﬁeld, Missouri 65803-8877

800.641.4282 | DMP.com

ADDITIONAL INFORMATION

Phone Line Monitor

The 893A uses a phone line monitor for the main and backup phone lines. Before sending a report, the 893A veriﬁes that

the main phone line is working. If the line is bad, the module tests the backup phone line. The 893A sends the report on

the ﬁrst working phone line.

The phone line monitor has a two-minute trouble delay and a one-minute restore delay. Phone line trouble is displayed in

the keypad Status List as a System Trouble. At least one keypad on the system must be programmed to display system

troubles in the Status List.

Figure 3: 893A Layout

893A to Panel Phone Line Connector

893A MAIN to Phone Block

893A BACKUP to Phone Block

893A Connector to Panel Connector

DS1 Buzzer

Two Line Digital Dialer

You can conﬁgure the 893A to provide two lines of digital dialer for XR150/XR550 Series panels. The MAIN modular jack

is used for the primary dialer. The BACKUP modular jack is used for the secondary digital dialer line.

Caution: To reduce the risk of ﬁre, use only 26 AWG or larger telecommunication line cord, such as DMP Model 356

Series Phone Cords.

Processor Fail Buzzer

The 893A Module also monitors the panel CPU and sounds a trouble buzzer whenever the panel is reset or the processor

stops functioning. The 893A Module also monitors the keypad bus and sounds a trouble buzzer whenever the keypad

bus fails to operate.

Jumper Settings

There are two sets of jumpers on the 893A Module. For Digital Dialer,

set both jumpers to DD. Refer to Figure3 for jumper locations.

MPX

Figure 4: Jumpers Set to DD

Andere DMP Electronics Steuereinheit Handbücher

DMP Electronics

DMP Electronics 734 Bedienungsanleitung

DMP Electronics

DMP Electronics RoBoard RM-G212 Bedienungsanleitung

DMP Electronics

DMP Electronics 716 Bedienungsanleitung

DMP Electronics

DMP Electronics ITI 738I Installationsanleitung

DMP Electronics

DMP Electronics Wiegand 734N Bedienungsanleitung

DMP Electronics

DMP Electronics 738Zplus Bedienungsanleitung

DMP Electronics

DMP Electronics 734N-WIFI Administratorhandbuch

DMP Electronics

DMP Electronics 736V Bedienungsanleitung

DMP Electronics

DMP Electronics SCS-104 Bedienungsanleitung

DMP Electronics

DMP Electronics myQ 736Q Montageanleitung

DMP Electronics

DMP Electronics 712-8 Bedienungsanleitung

DMP Electronics

DMP Electronics 1134 Installationsanleitung

DMP Electronics

DMP Electronics 734N Series Installationsanleitung

DMP Electronics

DMP Electronics 865 Bedienungsanleitung

DMP Electronics

DMP Electronics 734 Installationsanleitung

DMP Electronics

DMP Electronics 717 Bedienungsanleitung

DMP Electronics

DMP Electronics 780 Installationsanleitung

DMP Electronics

DMP Electronics 711S Bedienungsanleitung

DMP Electronics

DMP Electronics 867 Style W Bedienungsanleitung

DMP Electronics

DMP Electronics 708 Bedienungsanleitung

DMP Electronics

DMP Electronics 400 Bedienungs- und Wartungsanleitung

DMP Electronics

DMP Electronics RoBoard RM-G144 Bedienungsanleitung

DMP Electronics

DMP Electronics 714-D22 Bedienungsanleitung

DMP Electronics

DMP Electronics Wiegand 734N Installationsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung