DMP Electronics 532XR Bedienungsanleitung

123

Description

The DMP 532XR Demonstrator is a portable, hand held keypad that allows you to simulate many of the

operational functions of a DMP command processor panel.

The 532XR operates in either the Area Arming, All/Perimeter, or Home/Away mode and also provides

access to the following user menu options: ALARM SILENCE, SENSOR RESET, DOOR ACCESS,

ARMED AREAS, SYSTEM TEST, USER CODES, SCHEDULES, and DISPLAY EVENTS.

Powering the 532XR

Your 532XR operates on standard 9V Alkaline batteries

thatconnecttoa2-wirebatteryharnessatthebackofthe

keypad. A battery and battery holder are supplied as well

assomeadhesivefoamallowing youtoattach thebattery

holder directly to the back of the keypad housing. See

Figure 1.

Important: Unplug the 9V battery when not in use.

Three System Types

Area Arming

When first powered up, the 532XR displays

DEMONSTRATORforthreesecondsandthendefaultsto

the Area Arming mode.

Pressing the Command key displays: ARM DISARM. The select key under ARM allows you to arm all

areas or any combination of the available areas. The select key under DISARM allows you to disarm all

areas or any combination of the available areas.

All/Perimeter

ToentertheAll/Perimetermode,powerupthe532XRwhileholdingdownthe

farleft

selectkey.SeeFigure

2Aonback.Continueholdingtheselectkeyuntilyouheartwobeeps.The532XRdisplaysDEMONSTRATOR

for three seconds.

PressingtheCommandkeydisplays:PERIM ALL.The selectkeyunderPERIMarmsjusttheperimeter.

The select key under ALL arms both the interior and perimeter. During the exit delay, you can press the

select key under INSTNT to instantly arm the areas.

Home/Away

To enter the Home/Away mode: power up the 532XR while holding down the

second

left

select key. See

Figure 2B on back. Continue holding the select key until you hear two beeps. The 532XR displays

DEMONSTRATOR for 3 seconds followed by SYSTEM READY indicating the system is disarmed or

SYSTEM NOT READY if disarmed with the front door loop faulted. See Front Door Loop on back.

Entering a valid user code while disarmed displays: HOME AWAY. The select key under HOME arms

justtheperimeter. The select key under AWAYarmsboththeinteriorand perimeter. During the exit delay,

you can press the select key under INSTNT to instantly arm the areas.

Entering a valid user code while armed displays: ALL SYSTEM OFF followed by SYSTEM READY.

Armed Displays:

The All/Perimeter and Home/Away modes both use the display PERIMETER ON for

perimeter arming and SYSTEM ON for full system arming.

Adhesive

Backed

Foam

Battery

Holder

Alkaline

Battery

Harness

Figure 1: Connecting a 9V battery

LT-0192 (1/96)

USER'S GUIDE 532XR Demonstrator Keypad

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

Three System Types continued

Factory Programmed areas

The Area Arming, All/Perimeter, and Home/Away modes each contain factory programmed areas.

Area Arming All/Perimeter - Home/Away

1- Office (includes the Front Door) 1- Perimeter (includes the Front Door)

2- Warehouse 2- Interior

3- Shipping

4- Sales

Front Door Loop

Pressing the

second left

select key while the Office or Perimeter area is armed simulates a front door loop

faultand starts the entry delay. After 15seconds,the 532XR simulates a front door alarm.Enteringa valid

user code disarms the areas and clears the alarm display.

Inthe Home/Awaymode,ifyouselect instantarmingduring theexitdelay,pressingthefrontdoorloop key

initiates the alarm but you must enter your disarm code to view the alarm display.

Default User codes

Whenusingthe532XRinAreaArmingorAll/Perimetermodes,theusercodeconsistsof9+9+COMMAND.

When using the 532XR in the Home/Away mode, the user code consists of 9 + 9 + COMMAND or, 9 + 9 +

9 + 9 without COMMAND.

There is no provision in the 532XR for adding any other user codes.

Menu Options

All three operating modes of the 532XR have access to the User Menu options listed below. To enter the

menu,presstheCOMMANDkeyuntilMENU? NO YESisdisplayed,thenpresstheselectkeyunderYES.

At the ENTER CODE: prompt, enter 9 + 9 + COMMAND. Once in the menu, you can use the COMMAND

and ARROW keys to scroll through the available options.

Alarm Silence

Simulates silencing an alarm.

Sensor Reset

Simulates resetting sensors.

Door Access

Simulates a five second relay output.

Armed Areas

Displays current armed areas in the system.

System Test

This option always displays SYSTEM OKAY.

User Codes

Simulates adding and deleting user codes.

Schedules

Simulates setting permanent, temporary, and

output schedules. Memory is provided for one

schedule.

Display Events

Allows you to view up to five simulated events held

in memory. These events are programmed into the

keypad's firmware and cannot be changed by the

user.

Figure 2A: Hold for All/Perimeter

1234

5678

90 COMMAND

A B C DEF GHI JKL

VWX

STUPQRMNO

POWER

Figure 2B: Hold for Home/Away

1234

5678

COMMAND

A B C DEF GHI JKL

VWX

STUPQRMNO

POWER

Hold Hold

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

Digital Monitoring Products

Inhaltsverzeichnis

Andere DMP Electronics Tastenfeld Handbücher

DMP Electronics

DMP Electronics XTL Series Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Series Installationsanleitung

DMP Electronics

DMP Electronics 7800 Series Installationsanleitung

DMP Electronics

DMP Electronics 692 Security Command Montageanleitung

DMP Electronics

DMP Electronics Thinline Series Installationsanleitung

DMP Electronics

DMP Electronics 7872 Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline 7060 Bedienungsanleitung

DMP Electronics

DMP Electronics 7800 Series Installationsanleitung

DMP Electronics

DMP Electronics 9000 Series Bedienungsanleitung

DMP Electronics

DMP Electronics easy entry 791 Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Series Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Series Bedienungsanleitung

DMP Electronics

DMP Electronics 9800 Series Installationsanleitung

DMP Electronics

DMP Electronics Thinline 7463 Installationsanleitung

DMP Electronics

DMP Electronics Thinline 7060 Bedienungsanleitung

DMP Electronics

DMP Electronics 791 Easy Entry Montageanleitung

DMP Electronics

DMP Electronics Thinline 7060 Bedienungsanleitung

DMP Electronics

DMP Electronics 7800 International Series Installationsanleitung

DMP Electronics

DMP Electronics 9800 Series Installationsanleitung

DMP Electronics

DMP Electronics 9000 Series Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Aqualite 7000 Series Installationsanleitung

DMP Electronics

DMP Electronics 7872 Bedienungsanleitung

DMP Electronics

DMP Electronics Easy Entry 693 Montageanleitung

DMP Electronics

DMP Electronics Thinline 7060 Montageanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung