DMP Electronics 9800 Series Bedienungsanleitung

9800 Series Graphic Touchscreen Keypad

Quick Start Guide

Step 1: Remove the Cover

Insert a slotted-tip screwdriver into one of the slots on the bottom of the keypad and lift the screwdriver upward. Repeat with the other

slot. Separate the cover from the base and set the cover containing the keypad components aside.

Step 2: Run Wire

If installing the 9862 keypad with a wire-in power supply, run wire 18-22 AWG from an unswitched power outlet to the keypad mounting

location.

Step 3: Mount the Keypad

Mount 9862 with Screws

1. Route the keypad wires through the cutouts in the base.

2. Use the keypad base to mark the holes for the screws on the mounting surface.

3. Set the base aside and drill the holes.

4. Use the included screws to secure the keypad base to the surface. Do not

overtighten.

5. Place the keypad cover back onto the base and snap it into place.

Mount 9682USB on Deskstand

For mounting on a deskstand, see the QR code at the beginning of the document.

Full Installation and Programming Guide

To view the full 9800 Series Graphic Touchscreen Keypad Installation and Programming Guide, scan this QR code or

visit DMP.com.

This quick start guide walks you through installing the keypad.



 

 

























Armed/Power LEDs &

Proximity Reader

Dealer Logo Carousel Menu

Local

Weather

Interactive

Arming/

Disarming

Shield Press the

Navigation

Arrows or touch

and drag the

menu to scroll

microSD

Card Slot

C C

Mounting holes

Wiring cutouts

CCover latches

DDeskstand Holes

EMicro-USB Receptacle

FTamper Button

Base

(Inside)

18205

LT-2580 22174

INTRUSION • FIRE• ACCESS• NETWORKS

2500 North Partnership Boulevard

Springﬁeld, Missouri 65803-8877

Domestic: 800.641.4282 | International: 417.831.9362

DMP.com

Designed, engineered, and

manufactured in Springﬁeld, MO

using U.S. and global components.

Step 4: Wire the Keypad

Caution: Disconnect all power before wiring. Failure to do so may result in equipment damage or injury. Observe polarity when

making power connections.

9862

1. Plug the 4-wire harness into the back of the keypad with the black wire on position B

and the white/black wire on position R.

2. Connect the power supply’s positive wire to the white/black wire.

3. Connect the power supply’s negative wire to the keypad’s black wire.

4. Connect the power supply to power.

9862USB

1. Plug the cable end with the micro-USB connector into the back of the keypad.

2. Fit the security strap over the adapter with the wire slit facing up. Feed the cable through both slits in the strap.

3. Plug the cable end with the USB connector into the adapter.

4. Remove the center screw from the outlet’s wall plate. Thread the outlet screw through the security strap and into the wall plate,

then tighten.

5. Plug the adapter into the outlet.

Step 5: Pair the Keypad with the Panel

1. Ensure the panel has a house code programmed in the panel’s SYSTEM OPTIONS.

2. Enable pairing:

a. For the XTLplus or XTLtouch, press the Reset button for 2 seconds.

b. For XT Series and XR Series panels, reset the panel three times, allowing the transmit LED (PROG XMIT) to ﬂash between

each reset.

3. If pairing doesn’t start automatically, tap Press to Pair on the keypad screen.

The keypad attempts to pair for 10 minutes.

Paired: The keypad displays the home shield screen.

Not Paired: The keypad displays Pairing Failed. Repeat the steps above to reattempt pairing.

Step 6: Program the Panel and Keypad

For all programming instructions, see the QR code at the beginning of the document.

Step 7: Test the Keypad

For all testing instructions, see the QR code at the beginning of the document.

Base

(Back)

Wall

Tamper

B R

White/Black (R)

to Positive

Black (B)

to Negative

Black Negative

Red Positive

Andere Handbücher für 9800 Series

Andere DMP Electronics Tastenfeld Handbücher

DMP Electronics

DMP Electronics 9000 Series Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Series Installationsanleitung

DMP Electronics

DMP Electronics 9800 Series Installationsanleitung

DMP Electronics

DMP Electronics 7872 Bedienungsanleitung

DMP Electronics

DMP Electronics Easy Entry 693 Montageanleitung

DMP Electronics

DMP Electronics 7800 International Series Installationsanleitung

DMP Electronics

DMP Electronics Thinline Series Installationsanleitung

DMP Electronics

DMP Electronics Security Command 670-A Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline 7060 Bedienungsanleitung

DMP Electronics

DMP Electronics Thinline Aqualite 7000 Series Installationsanleitung

DMP Electronics

DMP Electronics 692 Security Command Montageanleitung

DMP Electronics

DMP Electronics Security Command 670 Bedienungsanleitung

DMP Electronics

DMP Electronics 699 Bedienungsanleitung

DMP Electronics

DMP Electronics 7800 Series Installationsanleitung

DMP Electronics

DMP Electronics Thinline 7060 Montageanleitung

DMP Electronics

DMP Electronics Thinline 7463 Installationsanleitung

DMP Electronics

DMP Electronics 781 Bedienungsanleitung

DMP Electronics

DMP Electronics Aqualite 7560A Bedienungsanleitung

DMP Electronics

DMP Electronics 9000 Series Installationsanleitung

DMP Electronics

DMP Electronics 9800 Series Bedienungsanleitung

DMP Electronics

DMP Electronics 7800 Series Installationsanleitung

DMP Electronics

DMP Electronics Thinline Series Bedienungsanleitung

DMP Electronics

DMP Electronics XTL Series Bedienungsanleitung

DMP Electronics

DMP Electronics 9000 Series Installationsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung