DNP QW410 Bedienungsanleitung
QW410 Printer
Up & Running Guide
© 2020. DNP Imagingcomm America Corp. PN: DOC-R-QW410
All rights reserved. Rev: 01.16.2020
2
About your new QW410 printer!
Ultra Compact and Lightweight.
Weighing in at less than 13 lbs, it
is now easier for anyone to carry
this printer from event-to-event.
Its small size allows you to carry
it in standard shoulder bags.
Innovative Print Sizes. The
QW410 4.5” printhead and
superior electronics and
mechanisms allow for many print sizes for more fun and
enjoyment for your customers. The QHD 4.5x8” Pano Print
media allows for a unique print size, without the need for
cropping for 16:9 high denition aspect ratio shots, for example.
It can also print many other sizes and aspect ratios to give you
options that can make your event unique and fun…like 2x4”,
3x4”, 4x4”, 4x4.5”, among others.
Lay Flat Function. Equipped with an innovative mechanism that
reduces the curl of the print, if needed. This function will switch
on automatically as needed, or you can control it yourself.
Supports External Battery. This printer has big energy savings…
it uses 35% less energy and allows for battery-powered
operation that can operate an entire event!
Wireless Ready. With DNP supplied wireless options, the QW410
is compatible with the mobile and wireless world, supporting
macOS, iOS, and most other Wi operating environments.
DNP Quality. The QW410 may be small, but it delivers big on
DNP photo quality color prints, the quality you have come to
expect from DNP.
3
Printer Terms & Components
PAPER TRAY
PAPER SCRAP
BIN
RIBBON
COMPARTMENT
PAPER
COMPARTMENT
PAPER SPOOLS
(WITH SPACERS)
4
Connecting the Printer for the First Time
ATTENTION:
Save the original box and packaging material! You can
store the printer in the box when its not in use. You can
also use the box for transporting or shipping the printer.
1. Unpack your printer. Remove your new printer from the
shipping box. Remove any packaging material (plastic, tape,
etc.) from the printer.
2. Verify that you have the following components.
• (1) QW410 printer
• (1) Paper tray
• (2) Paper spools
• (2) Paper spool spacers
• (1) Printer power cord
• (1) USB Cable
NOTE:
You also need a box of QW410 printer media to use your
new printer!
3. Place your printer in the printing location. Set your printer
on a level, sturdy surface. Placing the printer on an unstable
surface could cause the printer to fall, cause you injury, or
damage the printer components during printing.
4. Install the printer driver. Go to the DNP website and
download the printer driver.
dnpphoto.com/en-us/QW410-Drivers-and-Firmware
Follow the onscreen prompts as you install the driver.
5
5. Connect your printer. Make
sure your printer is powered
OFF. Connect the power cord
to the printer (blue circle)
and plug it into a wall outlet.
Connect a USB cable to the
type-B USB port and to the
computer (yellow circle).
Power ON the printer and
computer.
6. If necessary, use the paper
spacers. If you’re using 4 inch paper, install the spacers so
the paper aligns with the print head for proper printing. The
spacers lock into place so that they do not move during use.
If you’re using 4.5 inch paper, do not use the spacers.
Replacing the Printer Paper
1. Empty the scrap bin. If you haven’t already, remove the
paper tray from the front of the printer. Remove the scrap
bin and throw away any scraps. Set the scrap bin aside.
2. Remove the old paper (if necessary). Remove the paper
spools from the paper compartment. Remove the old paper
from the spools and throw it away.
3. Prep the new paper roll. Open the printer media box and
remove a roll of paper. Remove the plastic but do not
remove the edge seal at this time. Check that the paper
edges are at and are not protruding from the center of the
roll. Place the new paper roll on the paper spools. Be sure
to press the spools against the paper roll to set the paper
tightly against the spools.
6
4. Orient the paper roll. Make sure
the paper roll is oriented so that
the leading edge of the paper
roll is coming over the top of the
paper roll and directed towards
the bottom of the paper roll.
5. Set the new paper roll in the
printer. Place the spool and new
paper roll in the printer paper
compartment. Remove the seal
on the paper. Advance the paper
so that the paper from the top to
the bottom of the roll and into
the printer paper compartment.
Continue feeding the paper until
the printer beeps. The ERROR LED
changes from ashing red and
orange to ashing red.
6. Replace the scrap bin. Reset the scrap bin in the printer.
NOTE:
The POWER LED light turns green when the ribbon,
paper, and scrap bin are properly installed. If the ERROR
LED ashes red, make sure ribbon, paper, and scrap bin
are properly seated.
7. Replace the paper tray. The paper tray can hold up to 20
prints. However, it is recommended that prints are removed
from the tray at regular intervals to prevent jams.
7
Replacing the Printer Ribbon
1. Press the button on the top of the printer to open the ribbon
compartment.
2. If an existing ribbon is in
place, remove the ribbon
and discard it.
3. Orient the new ribbon so
that the supply side (larger
side) is towards you and
the take-up side (smaller
side) is towards the back of
the printer.
4. Align the left sides of the ribbon with the grooves and then
lower the right sides of the ribbons until they click into place.
5. Remove any slack from the ribbon by rotating the ribbon
towards the supply side.
6. Close the ribbon compartment.
SUPPLY TAKE-UP
PLACE THIS
SIDE FIRST
PLACE THIS
SIDE SECOND
Questions about warranties, drivers, advanced printer features,
or other products? Look for the Welcome Card in your printer
box or get more information here:
dnpphoto.com/support
DNP Imagingcomm America Corp.
4524 Enterprise Dr. NW
Concord NC 28027
All particulars of the product and its use contained in the document are provided by DNP Imagingcomm America Corporation
(DNP IAM) in good faith. All warranties implied or expressed, including but not limited to implied warranties of merchantability,
or tness of purpose, are excluded. Neither the whole nor any part of the information contained in, or the product described in,
this document may be adapted or reproduced in any material form without the prior written authorization of DNP IAM.
Tomo™, Hot Folder Print™, PrintCenter™, DS-Series Printers™, and PrintTurbine™ are trademarks and NexLab® is a regiered
trademark of DNP Imagingcomm America Corporation.
PrintRush® and Party Print® are regiered trademarks of Dai Nippon Printing Company LTD. Other product names and
companies mentioned herein are the trademarks of their respective owners.
© 2020. DNP Imagingcomm America Corporation. All rights reserved.
Andere Handbücher für QW410
1
Inhaltsverzeichnis
Andere DNP Drucker Handbücher
DNP
DNP DS?RX1 Versionshinweis
DNP
DNP DP-ID600 Bedienungsanleitung
DNP
DNP DS-SL20 Bedienungsanleitung
DNP
DNP CX-120 Bedienungsanleitung
DNP
DNP DP-QW410 Bedienungsanleitung
DNP
DNP DS-ID400 Bedienungsanleitung
DNP
DNP DS40 Bedienungsanleitung
DNP
DNP CX-120 Bedienungsanleitung
DNP
DNP DP-QW410 Bedienungsanleitung
DNP
DNP DP-DS620 Bedienungsanleitung
DNP
DNP DS-ID400 Einrichtungshandbuch
DNP
DNP DS?RX1 Bedienungsanleitung
DNP
DNP DS620A Bedienungsanleitung
DNP
DNP CX-120 Bedienungsanleitung
DNP
DNP DS620 Benutzerhandbuch
DNP
DNP DS-RX1 HS Versionshinweis
DNP
DNP DS-ID400 Service-Handbuch
DNP
DNP CX210 Bedienungsanleitung
DNP
DNP DS-SL10 Bedienungsanleitung
DNP
DNP CX-D80D Bedienungsanleitung
