DreameTech Mop D9 Bedienungsanleitung
Dreame Robot Vacuum-Mop F9
User Manual
Read this manual carefully before use, and retain it for future reference.
1
Safety Information
Usage
Restrictions
This product is for oor cleaning in a home environment only. Do not use it outdoors, on non-oor surfaces, or in a commercial or industrial
setting.
Do not use the vacuum-mop in an area suspended above ground level without a protective barrier.
Do not use the vacuum-mop at an ambient temperature above 40° C or below 0° C or on a oor with liquids or sticky substances.
Pick up any cables from the oor before using the vacuum-mop to prevent it from dragging them while cleaning.
Remove fragile or small items from the oor to prevent the vacuum-mop from bumping into and damaging them.
This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deciencies, or limited
experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning
and maintenance shall not be made by children without supervision.
Children shall not play with this product. Ensure children and pets are kept at a safe distance from the vacuum-mop while it is operating.
Keep the brush cleaning tool out of reach of children.
Do not place children, pets, or any item on top of the vacuum-mop regardless of whether it is stationary or moving.
Keep hair, ngers, and other body parts away from the suction opening of the vacuum-mops.
Do not use the vacuum-mop to clean any burning substances.
Do not vacuum up hard or sharp objects.
Make sure the vacuum-mop is turned o and the charging dock is unplugged before cleaning or performing maintenance.
Do not wipe any part of this product using a wet cloth or any liquids.
Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or damage arising from
improper use of this product.
Only for navigation and positioning purposes, the camera of the vacuum-mop will collect individuals in the surroundings within the range of the viewing angles
when it is cleaning. Please be assured that all your personal information will be protected by the data encryption technology.
2
Batteries and
Charging
Do not use any third-party battery, charger, or charging dock. Use only with RCS0 supply unit.
Do not attempt to disassemble, repair, or modify the battery or charging dock on your own.
Do not place the charging dock near a heat source.
Do not use a wet cloth or wet hands to wipe or clean the dock's charging contacts.
Do not improperly dispose of old batteries. Unneeded batteries should be discarded at an appropriate recycling facility.
If the power cord becomes damaged or broken, stop using it immediately and contact after-sales service.
Make sure the vacuum-mop is turned o when being transported and kept in its original packaging if possible.
If the vacuum-mop will not be used for an extended period, fully charge it, then turn it o and store in a cool, dry place. Recharge the
vacuum-mop at least once every 3 months to avoid over-discharging the battery.
This product contains batteries that can only be replaced by qualied technicians or after-sales service.
Hereby, Dreame Trading (Tianjin) Co., Ltd. declares that the radio equipment type RVS5-WH0 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.dreame-technology.com
Safety Information
3
Product Overview
Accessories
Note: The illustrations in this manual are for reference only, please refer to the actual product for the actual appearance.
Charging Dock
Water Tank
Cleaning Tool
Mop Pad
Power Cord
Side Brush
4
Product Overview
Vacuum-Mop
Power/Clean Button
Press and hold for 3 seconds
Press to start cleaning after the vacuum-mop is powered on
Cover latch
Visual Navigation Sensor
Status Indicator
White: Cleaning, or cleanup is completed
Blinking white: Cleaning paused
Blinking blue: Connecting to network
Blinking orange: Error
Spot/Dock Button
Press to send vacuum-mop back to charging dock
Press and hold for 3 seconds to start Spot Clean mode
Note: Press any button to pause while the vacuum-mop is cleaning,
returning to dock, or in Spot Clean mode.
5
Product Overview
Vacuum-Mop
Vacuum-Mop Sensors
Wi-Fi Indicator
Blinking slowly: To be connected
Blinking quickly: Connecting
On: Wi-Fi connected
Cleaning Tool
Collision Buer
Infrared Deceleration Sensor
Omnidirectional Wheel
Charging Contacts
Optical Sensor
Side Brush
Main Wheels
Main Brush
Brush Guard Clips
Reset Button
Press and hold to restore factory settings
Air Outlet/Speaker
Cli Sensors
6
Bin Clip
Bin Cover
Filter
Signaling Area
Charging Contacts
Power Port
Water Tank
Water Tank Stopper
Mop Pad
Attaching Area
Product Overview
Dust Bin Mopping Module
Charging Dock
7
Preparation
2. Install the side brush.
Note：
• Fully charge before rst use.
• Don't install the mopping module while charging.
4. Place the robot onto the charging dock to recharge.
Battery Level Indicator
White: Battery level is more than 15%
Orange: Battery level is less than 15%
≥6h
3. Place the charging dock on the level ground against wall and connect to a
power outlet.
Note：
• Make sure there is a distance of 0.5 meters or more on either side of the charging dock, and
more than 1.5 meters in front of it.
• Tidy up any loose cord which could accidentally move or unplug the charging dock.
• To ensure you can well connect to the vacuum-mop with your phone, make sure the
vacuum-mop and charging dock are in the range of Wi-Fi.
• Do not place the charging dock in an area with direct sunlight or where other objects could
block its signaling area, as this may hinder the vacuum-mop from returning to the charging
dock.
>1.5m
>0.5m
>0.5m
1. Remove the protective lm.
8
Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *.
Scan the QR code to download and install the app.
You will be directed to the connection setup page if the app is installed
already.
Or search "Mi Home/Xiaomi Home" in the app store to download and
install it.
Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
Note: The version of the app might have been updated, please follow the instructions
based on the current app version.
Reset Wi-Fi
Simultaneously press and hold the buttons and until you hear a
voice saying "Waiting for the network conguration".
Once the Wi-Fi indicator is slowly blinking, the Wi-Fi has been successfully
reset.
9
How to Use
3. Cleaning Mode
Four cleaning modes are available in the app:
Quiet, Standard, Strong and Turbo. The default mode is Standard.
4. Pausing/Sleep Mode
• Press any button to pause the vacuum-mop during cleaning.
• The vacuum-mop will automatically enter sleep mode after 10 minutes of
inactivity, then the power and charging indicators will go o. To wake up
the vacuum-mop, press any button.
Note: When the vacuum-mop is paused, placing it onto the charging dock will end the
current cleaning task.
2. Start Cleaning
Upon activation, the vacuum-mop will methodically clean each room in an
S-shape pattern, then nish by cleaning along edges and walls to ensure a
thorough job. When the vacuum-mop is done cleaning, it will automatically
return to the charging dock to recharge.
Note:
• Please fully charge and start from the charging dock before cleaning. Don't move the
robot and charging dock when the robot is working.
• If the battery is too low , the robot will automatically return to the dock to charge. It
will resume unnished cleaning tasks after charging to the appropriate power.
Note: Activating Spot Clean mode will end the current cleaning task of the vacuum-mop.
5. Spot Clean mode
When the vacuum-mop is in standby mode or paused, press and hold the
button for 3 seconds to start Spot Clean mode. In this mode, it will clean
a square-shaped area of 1.5 ×1.5 meters directly around the vacuum-mop.
When the spot cleaning is done, the vacuum-mop will automatically return
to its original location and shut o.
1. Turn On/O
Press and hold the button to turn on the vacuum-mop. Once the power
indicator turns solid white, the vacuum-mop is in standby mode. To turn o
the vacuum-mop, press and hold the button while the vacuum-mop is
stationary. Turning o the vacuum-mop will end the current cleaning task.
Inhaltsverzeichnis
Andere DreameTech Staubsauger Handbücher
DreameTech
DreameTech Dreame H11 Bedienungsanleitung
DreameTech
DreameTech T10 Bedienungsanleitung
DreameTech
DreameTech Dreame P10 Bedienungsanleitung
DreameTech
DreameTech DreameBot L10 Pro Bedienungsanleitung
DreameTech
DreameTech Bot D9 Pro Bedienungsanleitung
DreameTech
DreameTech T10 Bedienungsanleitung
DreameTech
DreameTech DreameBot Z10 Pro Bedienungsanleitung
DreameTech
DreameTech Dreame P10 Pro Bedienungsanleitung
DreameTech
DreameTech Dreame H11 Max Bedienungsanleitung
DreameTech
DreameTech VTT1 Bedienungsanleitung
DreameTech
DreameTech DreameBot W10 Bedienungsanleitung
DreameTech
DreameTech Dreame P10 Bedienungsanleitung
DreameTech
DreameTech T20 Bedienungsanleitung
DreameTech
DreameTech Bot W10 Bedienungsanleitung
DreameTech
DreameTech DreameBot D10 Plus Bedienungsanleitung
DreameTech
DreameTech DreameBot D10 Plus Bedienungsanleitung
DreameTech
DreameTech D9 Bedienungsanleitung
DreameTech
DreameTech T30 Neo Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
