Drive DeVilbiss Healthcare Hybrid-Power Bedienungsanleitung

Hybrid-Power

User Manual

1 – Hybrid-Power

The Hybrid-Power

The Hybrid-Power system combines the pressure redistribution properties using high specification

foams with advanced alternating cell technology. With these 2 key features, we can offer the

patient a true ‘step up, step down’ alternating therapy to repair and maintain healthy skin cells as

well as providing a comfortable and stable platform.

When the Hybrid Power system is in use with the pump, it is suitable for patients weighing up to

254kg, and at Very High Risk of developing pressure ulcers. When the system is not in use with a

pump, the system is suitable for patients weighing up to 226.7kg and at Medium to High Risk of

developing pressure ulcers.

2 – Hybrid-Power

Content

Fire Warning

Safeguards

Introduction

Installation

Pump Functions

Storage

Damage Prevention

Moving and Handling

Cleaning

Maintenance

Troubleshooting

Technical Description

Warranty

3 – Hybrid-Power

Fire Warning

The Hybrid-Power system complies with all relevant UK fire safety standards.

In order to reduce the risk of fire:

DO NOT SMOKE - Smoking will contaminate the product and is NOT permitted around or on the

mattress system. This is a common cause of fatal fires. This system uses room air for circulation

through the mattress. A cigarette could burn a hole in the mattress surface and cause damage to the

mattress system. Patient clothing, bed sheets and other items, may be combustible and could catch

fire. Failure to observe this warning could result in a severe fire, property damage, physical injury or

death.

DO NOT - use candles on or around the mattress system

DO NOT - use electric blankets with this mattress system

DO - keep hot equipment off the mattress surface. E.g. Hair dryer, curling tong, etc

DO - keep matches and lighters away from children

DO - keep heaters away from the mattress system

Follow all manufacturers’ instructions and warning.

In case of fire, exit and call the emergency services.

4 – Hybrid-Power

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE

DANGER - To reduce risk of electrocution:

1. Always unplug this product immediately after using.

2. Do not use while bathing.

3. Do not place or store product where it can fall or be pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. Do not reach for a product that has fallen into water. Unplug immediately.

WARNING – To reduce risk of burns, electrocution, fire or injury to person:

1. This product should never be left unattended when plugged in.

2. Close supervision is necessary when this product is used on or near children.

3. Use this product only for its intended use as described in this manual. Do not use attachments not

recommended by the manufacturer.

4. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has

been dropped or damaged, or dropped in water, return the product to a service centre for

examination and repair.

5. Keep the cord away from heated surfaces.

6. Never block the air opening of this product or place it on a soft surface, such as a bed or couch,

where their openings may be blocked. Keep the air opening free of lint, hair, and other similar

particles.

7. Never drop or insert any object into any opening or hose.

8. Connect this product to a properly grounded outlet only. See grounding instructions.

NOTE, CAUTION AND WARNING STATEMENTS

NOTE -

Indicates some tips

CAUTION -

Indicates correct operating or maintenance procedures in order to prevent damage to or

destruction of the equipment or other property

WARNING -

Calls attention to a potential danger that requires correct procedures or practices in

order to prevent personal injury

SYMBOLS

Class I electrical device

“BF” symbol indicates this product is according to the degree or protecting against

electric shock for type BF equipment.

Attention, instructions should be read

Refer to instruction manual/booklet

NOTE on ME EQUIPMENT “Follow instructions for use”

Authorised representative in the European community

Manufacturer

5 – Hybrid-Power

Disposal of Electrical & Electronic Equipment (WEEE)

Product conforms to all relevant standards (See Declaration of Conformity)

6 – Hybrid-Power

Introduction

Product description

The Hybrid-Power mattress is constructed from a number of carefully selected and purpose built

components using clinical testing to optimise patients comfort and support. The mattress will

support a patient weight up to 254kg. Any patient weight under 30kg requires the carer to conduct

a risk assessment. The mattress consists of:

1. Support Foam

The base foam provides a stable foundation for mattress cells to be built on, as well as providing a

support structure during patient transfer. The support foam also contains specially engineered

castellation’s in the side walls to allow the mattress to bend with precision.

2. Head Support

A specially designed head support section which

can be turned 4 ways to suit the patients’

requirements. This will also improve the

longevity of the product which in turn will

reduce on-going maintenance costs.

Cell structure

The 14 cell mattress is made up from two main cells groups:

3. Support cell: The foam in these cells provide support and stability to the patient when in use

and are located along the torso area

7 – Hybrid-Power

4. - High pressure cell: These cells have been specially designed and profiled to allow an increased

air flow to lower the overall peak pressures around the heels.

Cover

A waterproof vapour permeable cover with high frequency welds which can be cleaned with higher

concentrations of sodium hypochlorite without compromising the covers protective properties. The

cover also consists of a 360° zip to reduce on-going maintenance costs.

Pump unit

This pump has been specifically designed for the

Hybrid application. This compact and light

weight pump is easy to transport and can be

easily cleaned down to aid infection control.

Intended use

The Hybrid-Power System is intended to reduce the incidence of pressure ulcers while optimising

patient comfort. It may also be appropriate for the following:

Individual home care setting and long-term care facilities

Pain management as prescribed by a healthcare professional

Contradictions

Users with the following condition could experience contradictions if they use this device:

Cervical or skeletal traction

Unstable spinal cord injuries

8 – Hybrid-Power

Installation

Unpackaging

When unpacking the Hybrid-Power System, check for any damage which may have occurred during

transit. If found to be damaged remove the system from use and contact Drive DeVilbiss Healthcare

Ltd.

Setting up

1. Remove all existing mattress surfaces from the bed frame

2. Ensure the printed surface is placed facing upwards

3. Place the mattress on the bed frame with the image of the feet on the cover placed at the foot

end of the bed

4. Place a loosely fitted sheet over the mattress

5. Hang the pump at the foot end of the bed; adjust the hangers to secure the pump against the

foot board to reduce vibration. Avoid placing the pump on the floor

6. Join the connectors on the mattress feed pipes to the side of the pump

NOTE:

Ensure the feed pipes on the mattress are not kinked or tucked under the mattress as this

will restrict airflow

7. Plug the pump into the mains electrical outlet

NOTE:

Any extra power cord should be neatly arranged and off the floor to avoid any trips and any

damage to the cable

8. Turn on the pump using the main switch found on the side of the pump and press the standby

button on the front of the pump

9. The pumps low pressure indicator will remain until the mattress is inflated to the desired

pressure. The pumps initial set up can take up to 40 minutes

10. Adjust the pressure setting according to the patients weight

NOTE:

If using the mattress without a pump, remove the pump and store in a safe location

The feed pipe can be fastened to the mattress using the retainer clip provided

9 – Hybrid-Power

Pump Functions

Keys

Function and Description

Patient Weight Settings

3 comfort levels are available for a variety of patient weights.

Use the- / + to adjust the weight settings accordingly

On/Off Standby

Main power rocker switch can be located at the side of the pump. The

standby button is located on the front panel

Static

All cells in the mattress will be inflated by pressing this button. The pump

will automatically revert back to alternating mode after 20 minutes

Alternate

One in two cycle, this function will provide optimum pressure relief

Lock Out

After 5 minutes of inactivity, the pump will lock out its functions. To

unlock, press and hold the lock out key for 3 seconds.

Mute

Press the mute button to silence the alarms

Power Failure Indicator

When a power cut is detected, the pump will alarm and the LED will

illuminate

Low Pressure Indicator

When low pressure in the mattress is detected, the pump alarm and the

LED will illuminate

Inhaltsverzeichnis

Andere Drive Medizinische Geräte Handbücher

Drive

Drive Mountway Neptune Toilet lift Bedienungsanleitung

Drive

Drive DSF 130 Bedienungsanleitung

Drive

Drive 12025KD-1 Bedienungsanleitung

Drive

Drive TSE 120 Bedienungsanleitung

Drive

Drive Evolution OM-900 Bedienungsanleitung

Drive

Drive Inspired OT 1000 Bedienungsanleitung

Drive

Drive 15005L Montageanleitung

Drive

Drive 12023 Bedienungsanleitung

Drive

Drive Bed assist handle Bedienungsanleitung

Drive

Drive aluminum shower chair/commode Bedienungsanleitung

Drive

Drive inspired BCWL-7210S Bedienungsanleitung

Drive

Drive Folding bath bench with back Bedienungsanleitung

Drive

Drive RTL10433 Bedienungsanleitung

Drive

Drive Premium Guard Gel Overlay Bedienungsanleitung

Drive

Drive 16500BV Bedienungsanleitung

Drive

Drive 13033 Bedienungsanleitung

Drive

Drive Med Aire Plus 10" Bedienungsanleitung

Drive

Drive Med-Aire Edge Bedienungsanleitung

Drive

Drive PUREFILL PF1100 Bedienungsanleitung

Drive

Drive RTLAGF-900 Bedienungsanleitung

Drive

Drive RTL11148KDR Bedienungsanleitung

Drive

Drive AGF-5X Bedienungsanleitung

Drive

Drive 13067 Bedienungsanleitung

Drive

Drive Inspired Poziform P-AP100XS Montageanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung