DTS Scena LED 150 Bedienungsanleitung

Made in Italy

SCENA LED 150

User’s Manual rel. 1.2 GB

D.T.S. Illuminazione s.r.l. – ITALY

http://www.dts-lighting.it/

Le informazioni contenute in questo documento sono state attentamente redatte e

controllate. Tuttavia non è assunta alcuna responsabilità per eventuali inesattezze.

Tutti i diritti sono riservati e questo documento non può essere copiato, fotocopiato,

riprodotto per intero o in parte senza previo consenso scritto della D.T.S .

D.T.S. si riserva il diritto di apportare senza preavviso cambiamenti e modifiche

estetiche , funzionali o di design a ciascun proprio prodotto. D.T.S non assume alcuna

responsabilità sull’uso o sull’applicazione dei prodotti o dei circuiti descritti.

The information contained in this publication has been carefully prepared and

checked. However, no responsibility will be taken for any errors. All rights are

reserved and this document cannot be copied, photocopied or reproduced, in part or

completely, without prior written consent from D.T.S.

D.T.S. reserves the right to make any aesthetic, functional or design modifications to

any of its products without prior notice. D.T.S. assumes no responsibility for the use or

application of the products or circuits described herein.

Les informations contenues dans le présent manuel ont été rédigées et contrôlées

avec le plus grand soin. Nous déclinons toutefois toute responsabilité en cas

photocopié ou reproduit, dans sa totalité ou partiellement, sans le consentement

préalable de D.T.S.

D.T.S. se réserve le droit d'apporter toutes modifications et améliorations esthétiques,

fonctionnelles ou de design, sans préavis, à chacun de ses produits. D.T.S. décline

toute responsabilité sur l'utilisation ou sur l'application des produits ou des circuits

décrits.

Las informaciones contenidas en este documento han sido cuidadosamente

redactadas y controladas. Con todo, no se asume ninguna responsabilidad por

eventuales inexactitudes. Todos los derechos han sido reservados y este documento

no puede ser copiado, fotocopiado o reproducido, total o parcialmente, sin previa

autorización escrita de D.T.S.

D.T.S. se reserva el derecho a aportar sin previo aviso cambios y modificaciones de

carácter estético, funcional o de diseño a cada producto suyo. D.T.S. no se asume

responsabilidad de ningún tipo sobre la utilización o sobre la aplicación de los

productos o de los circuitos descritos.

INDEX:

1- SYMBOLS

2- GENERAL WARNING 4

3- GENERAL WARRANTY CONDITION 4

4- TECHNICAL FEATURES 5

5- MAIN ELECTRICAL CHARACTERISTICS 6

6- ACCESSORIES 7

7- IMPORTANT SAFETY INFORMATION 8

7.1 Fire prevention

7.2 Prevention of electric shock

7.3 Safety

8- INPUT / OUTPUT CONNECTIONS 8

9- DMX SIGNAL CONNECTION 9

9.1 DMX Addresses

9.2 Selecting the DMX address

10- FIRMWARE UPDATING 10

11- DISPLAY FUNCTIONS 11

12- SERVICE MENU 15

13- DMX PROTOCOL 16

1- SYMBOLS

Graphic symbols used on this manual

THIS SYMBOL INDICATES A HOT SURFACE

THIS SYMBOL INDICATES ELECTRIC SHOCK

RISK

THIS SYMBOL INDICATES GENERAL RISK

THIS SYMBOL MEANS “DO NOT PLACE THE

UNIT ON INFLAMMABLE SURFACES”

THIS SYMBOL INDICATES THE MINIMUM

DISTANCE TO BE KEPT BETWEEN THE DEVICE

AND THE LIT OBJECT

2- GENERAL WARNING

Read the instruction contained in this user manual carefully, as they give important

information regarding safety during installation , use and maintenance.

The device is not for domestic use and must be installed by a qualified electrician or

experienced person.

Always disconnect the device from the mains before maintenance.

The device must always be equipped with an efficient ground connection.

3- GENERAL WARRANTY CONDITIONS

The unit is guaranteed for 36 months from the date of purchase against manufacturing

material defects.

30cm

4- TECHNICAL FEATURES

OVERVIEW

SCENA LED 150 is a compact, lightweight, DMX-controlled theatre projector featuring

a single high-power White LED (3.000 °K), a Ø 120 mm PC or Fresnel lens, and a

long wide excursion 8,2°- 70°(PC Version) or 12,8 °- 62°(Fresnel Version) linear

motorized zoom with high-efficiency optical system, enabling it to be used as a PC

Beam or a very wide Wash.The unit is wireless ready.

SCENA LED 150 is a modern alternative to conventional theatre lights, improving light

quality, flexibility of use and installation, energy savings and component duration.

In fact the fixture doesn’t heat up, and the projection is always flicker free.

Also, the dimming curves are similar to those of halogen lamps.

The connectors are Powercon In & Out and 5 poles DMX In & Out.

SCENA LED 150 is contained in a strong housing with folded edges, designed to

resist all the rigours of continuous use.

Also, the yoke has an exclusive round flange + clutch system which guarantees a

perfect grip and safer operation.

PRODUCT CODES:

03.TS016.A SCENA LED 150 *White 3.000 °K *PC BLACK

03.TS016.F SCENA LED 150 *White 3.000 °K *FR BLACK

03.TS016.AWS SCENA LED 150 *White 3.000 °K *With Wireless on Board *PC BLACK

03.TS016.FWS SCENA LED 150 *White 3.000 °K *With Wireless on Board *FR BLACK

03.TS017.A SCENA LED 150 *White 4.000 °K *PC BLACK

03.TS017.F SCENA LED 150 *White 4.000 °K *FR BLACK

03.TS017.AWS SCENA LED 150 *White 4.000 °K *With Wireless on Board *PC BLACK

03.TS017.FWS SCENA LED 150 *White 4.000 °K *W ith Wireless on Board *FR BLACK

03.TS018.A SCENA LED 150 *White 5.600 °K *PC BLACK

03.TS018.F SCENA LED 150 *White 5.600 °K *FR BLACK

03.TS018.AWS SCENA LED 150 *White 5.600 °K *With Wireless on Board *PC BLACK

03.TS018.FWS SCENA LED 150 *White 5.600 °K *W ith Wireless on Board *FR BLACK

LED Technology

1 x White LED 3.000 °K, CRI>90, 7.000 Lumens

Also available as 4.000 °K and 5.600 °K LEDs

LED Max power: 150W

Optical group

Linear motorized zoom:

PC Version (Ø 120 mm PC lens) from min 8,2°(1.600 Lux at 5 mt)

to max 70°(185 Lux at 5 mt)

Fresnel Version (Ø 120 mm Fresnel lens) from min 12,8°(800 Lux at 5 mt)

to max 62°(250 Lux at 5 mt)

Control

4 DMX channels

LED display + 4 soft keys

Wireless ready

Connectors

Power supply: POWERCON IN & OUT Connector

DMX: 5 poles In & Out Connector

Power supply

Electronic full-range AC 90-260 V 50 / 60 Hz

5- MAIN ELECTRICAL CHARACTERISTICS

Input Voltage Range : Vin 90 - 260 Vac

Frequency : 50 / 60 Hz

Power Consumption Range : 5 - 160 W

Power Factor (Pf) : 0.95 electronic PFC controller

Efficiency : 95% typical

Control Input:

Control Signal : DMX 512

Dimming System : Constant Current PWM

Address Range : DMX 512 channels addressable by display

6- ACCESSORIES

As standard

1 x User’s Manual

1 x POWERCON male cable connector (D.T.S. Code: 0520P014)

1 x XLR 5 pins male cable connector (D.T.S. Code: 0508B028)

1 x XLR 5 pins female cable connector (D.T.S. Code: 0508B027)

1 x Filterframe for SCENA LED 150 *Black finish (D.T.S. Code: 02M00416.46)

Optional (on request)

* “C” Clamp G60 (Max. Load. 50 Kg) *Black finish (D.T.S. Code: 0521A004)

* “C” Clamp G60 (Max. Load. 50 Kg) *Chrome finish (D.T.S. Code: 0521A004.20)

* Barndoor for SCENA LED 150 *Black finish (D.T.S. Code: 03.TBD01)

* Ø 120 mm PC lens for SCENA LED 150 (D.T.S. Code: 0506P003)

* Ø 120 mm Fresnel lens for SCENA LED 150 (D.T.S. Code: 0506P004)

* Filterframe for SCENA LED 150 *Black finish (D.T.S. Code: 02M00416.46)

DIMENSIONS

Unit Dimensions Packing Dimensions

(LxWxH) (LxWxH)

330 x 250 x 301 mm 300 x 235 x 425 mm

Weight Weight

5,3 Kg (PC version) 6,3 Kg (PC version)

5,1 Kg (Fresnel version) 6,1 Kg (Fresnel version)

250 mm

330 mm

281 mm

185mm

7- IMPORTANT SAFETY INFORMATION

7.1 Fire prevention:

Never locate the fixture on any flammable surface.

Minimum distance from flammable materials: 10 cm.

Minimum distance from the closest illuminable surface: 30 cm.

Replace any blown or damaged fuses only with those of identical value (3,15 AT).

7.2 Prevention from electric shock:

High voltage is present inside the unit.

Unplug the unit prior to performing any operation which involves touching the inside of

the unit.

This equipment must be grounded, do not connect to non-grounded supplies.

The use of a thermal magnetic circuit breaker is recommended for each SCENA LED

150 unit.

Use only AC supplies 90-260V, 50 / 60 Hz.

SCENA LED 150 should never be located in position exposed to rain or in areas of

extreme humidity.

A good air ventilation is essential for proper equipment work.

7.3 Safety:

The external surface of the unit may exeed 50°C; never handle the unit until at least 5

minutes have elapsed since the unit was turned off.

Never install the unit in an enclosed area lacking sufficient air flow.

The ambient temperature should not exeed 40°C and s hould not be lower than -10°C.

8- INPUT / OUTPUT CONNECTIONS

FUSE 3,15 AT

DMX OUT

XLR 5 Pins Male

Panel Connector

MAINS AC INPUT

90-260V 50/60 Hz

DMX IN

XLR 5 Pins Female

Panel Connector

DISPLAY PANEL

MAINS AC OUTPUT

90-260V 50/60 Hz

(MAX 14 SCENA LED 150 UNITS

@ 230V ;

MAX 7 SCENA LED 150 UNITS

@ 120V)

30cm

9- DMX SIGNAL CONNECTION:

The unit operates using a digital DMX 512 signal.

Connection between the controller and the unit or between units must be carried out

using a two pair screened ø 0.5 mm.

Ensure that the conductors do not touch each other.

Do not connect the cable ground to the DMX connector chassis.

The plug housing must be isolated. Connect the mixer signal to the DMX IN projector

plug and connect it to the next projector by connecting the DMX OUT plug on the first

unit to the DMX IN plug of the second one.

In this way, all the projectors are cascade connected.

If the display showing the DMX address flashes, then one of the following errors has

occurred:

- DMX signal not present

- DMX reception problem

For Installations where long distance DMX cable connections are needed, we

suggest to use a DMX terminator.

The DMX terminator is a male XLR 3-5 pins connector with a 120 ohm resistor

Between pin 2 and 3.

The DMX terminator must be plugged into the last unit (DMX out panel connector) of

the DMX line.

PLACE A 120 OHM RESISTOR BETWEEN PIN 2

AND 3 OF A MALE XRL CONNECTOR AND PLUG IT

INTO THE DMX OUT PANEL CONNECTOR OF THE

LAST UNIT CONNECTED TO THE DMX LINE

OUT

120 ohm

PIN 3

PIN 2

4 2

1=GND

2=DATA-

3=DATA+

CONTROLLER

S T A N D A R D

D M X 5 1 2

DMX OUT

DMX IN

DMX OUT

9.1 DMX addresses

SCENA LED 150 can be controlled with 4 DMX channels.

In order to use the unit in 4 channels, set the following addresses on the mixer:

Projector 1 A001

Projector 2 A005 If you want to select the next projector, just add “4”

Projector 3 A009

….. A….

projector 6 A021

9.2 Selecting the DMX address

1) Press the UP-DOWN key until you reach the required DMX address. The numbers

on the display will start to flash (but the new DMX address hasn't yet been set).

2) Press ENTER to confirm your selection. The numbers on the display will stop

flashing and the projector is now controlled by the new DMX address.

TIPS: if you keep pushed the UP or DOWN keys, the channels are calculated more

quickly and you get a faster selection.

2) Press ENTER to confirm your selection. The numbers on the display will stop

flashing and the projector is now controlled by the new DMX address.

10- FIRMWARE UPDATING

Warning:

This procedure require a base knowledge of Windows computer applications.

Please refer to an authorised D.T.S. service centre.

To update the software version of the SCENA LED 150 you need:

D.T.S. RED BOX interface (D.T.S. Code: 03.LA.008).

USB-DMX Driver for the D.T.S. RED BOX interface.

D.T.S. Firmware upgrade utility program.

(The driver and the installation procedure are available in our web site

www.dts-lighting.it)

Updating the software version.

Please follow the procedure below to perform the update:

1. Install the D.T.S. RED BOX USB-DMX driver on the PC you will use to update the

unit software.

2. Connect the D.T.S. RED BOX interface to the PC by using a USB cable.

3. Connect the D.T.S. RED BOX interface to the fixture by using a DMX cable.

4. Download the new software version into the unit by using D.T.S. Firmware upgrade

utility program.

Andere Handbücher für Scena LED 150

Inhaltsverzeichnis

Andere DTS Beleuchtungsausrüstung Handbücher

DTS

DTS MOON 1200 Bedienungsanleitung

DTS

DTS ALCHEMY 5 Bedienungsanleitung

DTS

DTS TITAN SOLO Bedienungsanleitung

DTS

DTS NICK NRG 1201 Bedienungsanleitung

DTS

DTS 03.P16.02.01.LED PAR16 LED MR16 BLACK Bedienungsanleitung

DTS

DTS HORUS FULL COLOUR Bedienungsanleitung

DTS

DTS XM 2500 Sport Bedienungsanleitung

DTS

DTS Raptor Bedienungsanleitung

DTS

DTS MOON 575 Bedienungsanleitung

DTS

DTS NicKWash 600 Bedienungsanleitung

DTS

DTS DELTA R FULL COLOR Bedienungsanleitung

DTS

DTS SCENA COMPACT LED 50 Bedienungsanleitung

DTS

DTS PROFILO LED 80 Bedienungsanleitung

DTS

DTS DIVE/R 18 RGB Bedienungsanleitung

DTS

DTS PAR64Ip66 watertight Bedienungsanleitung

DTS

DTS PROFILO 500 Bedienungsanleitung

DTS

DTS Discharge Lamp 35-70-150W Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

DTS

DTS ALCHEMY 5 Bedienungsanleitung

DTS

DTS PAR 20 Bedienungsanleitung

DTS

DTS XR2000 BEAM Bedienungsanleitung

DTS

DTS Scena LED 150 Bedienungsanleitung

DTS

DTS XR5 SPOT Bedienungsanleitung

DTS

DTS FOS 100 FULL RGBW Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung