DURKOPP ADLER 884 Bedienungsanleitung

884

Special Sewing Machine

Instruction manual

Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld

Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com

Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:

Rev. index: 01.0 Printed in Federal Republic of Germany 0791 884751

10/2012

Property of Dürkopp Adler AG and copyrighted. Reproduction or publication of the content in any manner,

even in extracts, without prior written permission of Dürkopp Adler AG, is prohibited.

Foreword

This instruction manual is intended to help the user to become familiar

with the machine and take advantage of its application possibilities in

accordance with the recommendations.

The instruction manual contains important information on how to

operate the machine securely, properly and economically. Observation

of the instructions eliminates danger, reduces costs for repair and

down-times, and increases the reliability and life of the machine.

The instruction manual is intended to complement existing national

accident prevention and environment protection regulations.

The instruction manual must always be available at the machine/sewing

unit.

The instruction manual must be read and applied by any person that is

authorized to work on the machine/sewing unit. This means:

–Operation, including equipping, troubleshooting during the work

cycle, removing of fabric waste,

–Service (maintenance, inspection, repair) and/or

–Transport.

The user also has to assure that only authorized personnel work on the

machine.

The user is obliged to check the machine at least once per shift for

apparent damages and to immediatly report any changes (including the

performance in service), which impair the safety.

The user company must ensure that the machine is only operated in

perfect working order.

Never remove or disable any safety devices.

If safety devices need to be removed for equipping, repairing or

maintaining, the safety devices must be remounted directly after

completion of the maintenance and repair work.

Unauthorized modification of the machine rules out liability of the

manufacturer for damage resulting from this.

Observe all safety and danger recommendations on the machine/unit!

The yellow-and-black striped surfaces designate permanend danger

areas, eg danger of squashing, cutting, shearing or collision.

Besides the recommendations in this instruction manual also observe

the general safety and accident prevention regulations!

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe all

the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot, needle

plate, feed dog and bobbin) when threading, when the workplace is

left, and during service work, the machine must be disconnected

from the mains by switching off the master switch or disconnecting

the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance unit.

Exceptions to this are only adjustments and functions checks made

by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time as

the entire sewing unit is found to comply with EC directives.

13. The line cord should be equipped with a country-specific mains

plug. This work must be carried out by appropriately trained

technicians (see paragraph 8).

It is absolutely necessary to respect the safety

instructions marked by these signs.

Danger of bodily injuries !

Please note also the general safety instructions.

Contents Page

Introduction and safety instructions

Part 1: Operating Instructions Class 884 – Original Instructions

(Edition 10/2012)

1 Product description ........................................... 5

2 Designated use .............................................. 5

3 Subclasses ................................................. 7

4 Optional equipment ............................................ 8

5 Technical data

5.1 Technicaldatasubclasses......................................... 10

6 Operation

6.1 Threadingtheneedlethread ....................................... 11

6.2 Winding the hook thread.......................................... 12

6.3 Bobbin insertion and threading the hook thread ........................... 12

6.4 Adjustingthethreadtension ....................................... 13

6.4.1 Adjusting the hook thread tension .................................... 13

6.4.2 Adjustingtheneedlethreadtension................................... 14

6.5 Switchingthethreadtensionerson/off................................. 16

6.6 Adjustingthethreadregulator ...................................... 17

6.7 Needle change in single needle machine with the hook to the right from the needle...... 18

6.8 Liftingandfoldingtherollerpresser................................... 19

6.9 Sewing-footpressure............................................ 20

6.10 Sewing backward (feeding backward; backtacking) ......................... 21

6.11 Settingthestitchlength.......................................... 22

6.12 Startingthemanuallycontrolledmachinewiththeclutchmotor.................. 23

6.13 Operatingthemachineequippedwiththepositioningmotor.................... 24

6.13.1 Usingthepedal............................................... 24

6.13.2 Using the key ................................................ 25

6.14 Materialguide................................................ 26

6.14.1 Materialguideswitchon/off........................................ 26

6.14.2 Adjustingthematerialguide ....................................... 27

7 Positioning drive Efka DC1550/DA321G ............................... 28

8 Sewing with machine equipped with positioning motor

8.1 Machineautomaticfunction ....................................... 29

8.2 Exampleofmachineoperationatsewing ............................... 30

Contents Page

9 Maintenance

9.1 Cleaning and checking .......................................... 31

9.2 Lubrication.................................................. 33

9.3 Repair..................................................... 34

1 Product description

The Dürkopp Adler 884 is a special single needle sewing machine with

narrow post bed for universal use.

·It is a double lockstitch post bed sewing machine .

·It has a two step feed. A lower wheel feeder and a driven roller

presser feed in two steps, a needle feed feeds in the first step

only. The first step represents 50% of the total stitch length.

Depending on subclass, the machine may be equipped with

automatic functions such as thread trimming, automatic

backtacking, automatic foot lifting, or without them.

·The machine is equipped with a standard two part vertical hook.

·Maximum foot lift is 12 mm.

·The residual thread length after thread trimming is about 8 mm.

·A safety clutch prevents a changing of the hook setting or a hook

damage in the case of a thread deflection into the shuttle track.

·The throat plate has replaceable inserts with the stitch hole

dimension difference, which are optional depending on the needle

size.

·Automatic wick lubricating with an inspection glass on the arm for

machine and hook lubrication.

·Integrated bobbin winder.

2 Designated use

The class 884 is designated for sewing shoe, leather, and upholstery

sewing. In general, the material sewn is leather (natural or artificial).

It is possible to use it for shoe fabrics too.

The equipment for light or medium heavy sewing is mounted on the

machine as an option.

It is possible to sew dry material only which may not be thicker than

7 mm when pressed down with a roller presser. The material may not

contain hard objects, as the machine is not equipped with an eye

guard. This machine may be operated in dry rooms and by a trained

person only who is aware of the risks described in this instruction.

This special sewing machine may be set up and operated only

in dry, well-maintained premises. If the sewing machine is used in

premises which are not dry and well-maintained it may be

necessary to take further precautions (which should be agreed in

advance - see EN 60204-31:1999).

As manufacturers of industrial sewing machines we proceed on the

assumption that personnel who work on our products will have

received training at least sufficient to acquaint them with all normal

operations and with any hazards which these may involve.

Notes:

3 Subclasses

884-150050 Single-needle double lockstitch post bed sewing

machine with wheel feed, needle feed with driven

roller foot and standard hook.

884-150152 Single-needle double lockstitch post bed sewing

machine with wheel feed, needle feed with driven

roller foot and standard hook, electro-magnetic

thread cutter, electro-magnetic seam bartacking and

sewing foot lifting.

Reduced stitch equipment: by pressing a key on the

machine head a complete stitch with shortened

stitch length is sewn.

4 Optional equipment

The following optional equipments are available for the class 884 :

Order No. Optional equipment Subclasses

884-150050

884-150152

9880 888101 Integrated sewing light with 2 LED, including dimmer transformer x x

9880 888100 Diode sewing light 3W x x

0888 320254 Variator for a continuous regulation of the difference between the o x

feed wheel and the driven roller foot

0688 130384 Knee lever for the sewing foot lifting x X

9805 791113 USB-Memory-Stick for data transfer with the Efka Control DA321G x x

0867 490013 Bracket for the control panel x x

0867 490244 Measuring and displaying the pressure value of the presser roll and the x

the needle thread tension

0888 310134 Kit for the blocking of the needle feeding x x

0884 590014 Upgrade kit x

N800 080030 Rectractable material guide x x

N800 080040 Retractable roller material guide x x

Stands

MG 55 400334 Stand set MG 55-3 for toothed belt drive, with pedalxx

Table top size 1060 x 500 mm

MG55 400324 Stand set MG 55-3 for V-belt drive, with pedalxx

Table top size 1060 x 500 mm

x = Optional equipment

o = Standard equipment

Additional optional equipments can be requested at our Application

Center (APC).

E-Mail: marketing@duerkopp-adler.com

Inhaltsverzeichnis

Andere DURKOPP ADLER Nähmaschine Handbücher

DURKOPP ADLER

DURKOPP ADLER D868 Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 745-34-2 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 550-12-33 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 650-16 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER DAC BASIC - CLASS 271 PART II V 12-2010 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 580 - Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 911 Produkthandbuch

DURKOPP ADLER

DURKOPP ADLER 381 Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 911-211 Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 805 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 372 Leitfaden

DURKOPP ADLER

DURKOPP ADLER 888-460522 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 867 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 8967 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 911-210-3020-10 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 367 Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 581 Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 370-BT Series Leitfaden

DURKOPP ADLER

DURKOPP ADLER 581 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER 745-35-10 F Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER 559 - Benutzerhandbuch

DURKOPP ADLER

DURKOPP ADLER 745-35-10 D Betriebsanleitung

DURKOPP ADLER

DURKOPP ADLER PURE 967 Bedienungsanleitung

DURKOPP ADLER

DURKOPP ADLER DAC classic 867 Betriebsanleitung

Beliebte Nähmaschine Handbücher anderer Marken

Riccar

Riccar RL634DE Bedienungsanleitung

Singer

Singer 2517 Bedienungsanleitung

Pfaff

Pfaff 3307-1 SERIES Bedienungsanleitung

Janome

Janome Quilt Maker Pro 18 VERSA Bedienungsanleitung

Siruba

Siruba C007JP Bedienungsanleitung

Husqvarna Viking

Husqvarna Viking Designer SE Bedienungsanleitung

Singer

Singer 148-5 Bedienungsanleitung

IKEA

IKEA SY Bedienungsanleitung

Pfaff

Pfaff 571 Bedienungsanleitung

Singer

Singer 15-91 Bedienungsanleitung

Brother

Brother BB370 Bedienungsanleitung

Pegasus

Pegasus WT100 Series Bedienungsanleitung

Reliable

Reliable 7100DB Bedienungsanleitung

Pfaff

Pfaff 937 Bedienungsanleitung

Singer

Singer 6038 Bedienungsanleitung

Singer

Singer 413K Bedienungsanleitung

Pfaff

Pfaff 1471 E1 Bedienungsanleitung

Kenmore

Kenmore 16677 - Serger Sewing Machine Bedienungsanleitung