Dux 2F136S Bedienungsanleitung

Owner’s Manual

Electric Boosted Solar Water Heater

Specications and materials may change without notice.

Effective for Dux electric boosted solar water heaters manufactured and sold after 1 January 2012.

Carefully remove all packaging and

transit protection from the heater before

installation. Dispose of the packaging

responsibly using re-cycling facilities

where they exist.

Installation Details

Owner’s Information

Warranty

H3161 025248 Rev. D

Models: 2F136S

2F136SD

3F136S

3F136SD

4F136S

4F136SD

For advice, repairs and service, call:

1300 365 115 (Australia)

0800 729 389 (New Zealand)

Owner’s Manual – Dux Electric Boosted Solar

H3161 025248 Rev. D

Welcome To Dux Hot Water 1

Installation of the Tank 2

Plumbing Connections 4

Specications 7

Installation of Collectors 8

Plumbing Connections to

Collectors 11

Temperature Sensor 13

Panel Management 15

Electrical Connections 17

Hotlogic Controller 19

Owner’s Information 21

Troubleshooting 25

Warranty 27

Other Information 30

Contents

Owner’s Manual – Dux Electric Boosted Solar

H3161 025248 Rev. D

Welcome To Dux Hot Water

Your decision to purchase a Dux Hot

Water system will reward you for many

years to come.

Since 1915, the Dux range has seen

continuous research and development,

resulting in many breakthroughs in the

efciency, reliability and longevity of hot

water systems.

Dux water heaters are manufactured

in Australia in a state-of-the-art facility,

using a Quality Endorsed Company

production system.

This is your assurance that you have

purchased the highest quality water

heater available, one that will provide

continuous hot water for all your needs

– safely, economically, and for many

years to come.

To be upfront about it, we want Dux to

be your brand of choice. So you can

depend on us to provide more than just

a hot water system.

You can rely on Dux products and

choose them with condence. We’ll

make sure you have the information, the

quality and the innovation you’re looking

for, including the latest energy-saving

alternatives. If you should ever have a

problem – and we’ll bet you won’t –

you’ll nd that we’re easy to get hold of,

friendly to talk to and quick to act. Our

service is all about providing anything

you need as soon as you need it.

Go with Dux and you’ll have a

dependable, economical, efcient hot

water system designed to perform well,

year after year. And that’s a promise.

Owner’s Manual – Dux Electric Boosted Solar

2H3161 025248 Rev. D

Installer’s Guide

Full and detailed installation instructions

are in the Installer’s Guide, included

inside the water heater’s carton.

Location

The water heater should be located as

close as possible to the most frequently

used hot water outlet. Ensure that the

data plate is clearly visible and provide

adequate access for service to the

thermostat, relief valve and anode.

Note: All models are equipped with a

sacricial anode, accessible through the

top cover. Allow 50% of the height of

the water heater for clearance above to

replace the anode.

We recommend a plinth be installed

under the water heater where the

water heater is subjected to wet

conditions

A properly drained overow tray must

be used where property damage could

occur from water spillage. (See AS/

NZS3500.4 for further details.)

Note: Warranty does not cover

consequential damage due to heater

leakage.

Safety

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning

use of the appliance by a person

responsible for their safety.

Children and animals should be

supervised to ensure that they do not

interfere with the appliance.

Model Numbers

Below is a list of model numbers and

their descriptions:

Tank

Model Description

2F136S 250 Litre tank

2F136SD 250 Litre tank with Panel Management

3F136S 315 Litre tank

3F136SD 315 Litre tank with Panel Management

4F136S 400 Litre tank

4F136SD 400 Litre tank with Panel Management

Installation of the Tank

Owner’s Manual – Dux Electric Boosted Solar

H3161 025248 Rev. D

Frost Protection

Consult the table right to determine if

your system needs an anti-frost valve.

If your model does require frost

protection, you must install an anti-frost

valve.

However, TWO anti-frost valves must

be installed if you live in alpine areas or

areas subject to extreme frost, such as

the ACT and Snowy Mountain regions.

The anti-frost valve comes in kit form

and must be ordered seperately.

Installation of the Tank

Tank

Model

Anti-Frost Valve

Needed?

2F136S Yes

2F136SD No

3F136S Yes

3F136SD No

4F136S Yes

4F136SD No

Frost Protection Installation Map

Wellington

Auckland

Christchurch

Locations in grey may be

subject to frost.

Owner’s Manual – Dux Electric Boosted Solar

4H3161 025248 Rev. D

Installation Requirements

This water heater must be installed

by a licensed tradesperson, and in

accordance with:

• AS/NZS3500.4 “National Plumbing

and Drainage Code Hot Water

Supply Systems – Acceptable

Solutions”.

• Clause G12 of the New Zealand

building code.

• Local authority regulations.

• Outside Australia and New Zealand,

please refer to local plumbing and

building codes and regulations.

• Notice to Victorian customers from

the Victorian Plumbing Industry

Commission – this water heater must

be installed by a licensed person as

required by the Victorian Building Act

(1993). Only a licensed person will

give you a compliance certicate,

showing that the work complies with

all the relevant Standards and only a

licensed person will have insurance

protecting their workmanship for 6

years.

Water Supply Pressure

This water heater is designed for direct

connection to water supply pressures of

no greater than:

All Models – 800kPa

Where the mains pressure can exceed

or uctuate beyond the pressure shown

above, a pressure limiting device

(complying with AS1357) must be tted

in the cold water inlet supply. This device

must be installed after the isolating

valve and set below the pressure shown

above. Note during periods of lower

demand water pressure may increase.

Pool Heating

This water heater must not be used for

pool heating.

Pressure & Temperature Relief

Valve

The Pressure & Temperature Relief Valve

is supplied loose with the water heater.

The valve rating is:

All Models – 1000kPa

The PTR valve must be installed directly

into the top socket marked “RELIEF

VALVE”. The drain line from this valve

must run in a continuously downward

direction in a frost-free ambient position

with the discharge end left open to

atmosphere permanently.

The PTR Valve is not intended to enable

connection of the water heater to

supplementary energy sources such as

solar panels or slow combustion stoves

(refer AS/NZS 3500.4 for guidance on

these types of installations).

Open the PTR Valve for approximately

10 seconds by lifting the lever on the

valve to ensure water is relieved to waste

through the relief drain pipe. Lower lever

gently and check that it closes correctly.

Plumbing Connections

Owner’s Manual – Dux Electric Boosted Solar

H3161 025248 Rev. D

The PTR Valve must not be tampered

with or removed. The water heater must

not be operated unless this valve is

tted and in working order.

The PTR Valve should be checked for

adequate performance or replaced at

intervals not exceeding 5 years, or less

in areas where local regulations apply.

Important: The PTR Valve and its

drain outlet pipe must not be sealed or

blocked. It is normal for the PTR valve

to leak a small amount of water during

heating cycles.

Danger

Failure to operate the relief valve easing

lever at least once every six (6) months

may result in a problem with the water

heater and in some cases the tank may

explode.

Warning: A separate drain line must be

run for this relief valve. It is not permitted

to couple drain lines from relief valves

into a single common drain line.

Cold Water Connection

An approved isolating valve, non

return valve, line strainer (optional but

recommended), and union must be

tted between the supply main and the

RP¾"/20mm T tting connected to the

socket in the water heater.

All ttings must be approved by the

relevant Authority and in accordance to

the plumbing code.

Union

Connection

Non-return

Valve

Line

Strainer

Cold Water

Inlet

Expansion

Valve

Isolating Valve

(Spindle Vertical)

Note: a combined isolating valve/non-

return valve/line strainer may be used.

Expansion valve only required where local

regulations demand.

Note for S.A. and W.A.: It is a state

requirement that a pressure relief valve

be tted on the cold water supply line

between the non return valve and the

water heater.

PTR valve

Plumb to waste

to comply with

AS/NZS 3500.4

and local plumbing

codes

Plumbing Connections

Owner’s Manual – Dux Electric Boosted Solar

6H3161 025248 Rev. D

Hot Water Connection

The hot water line should be connected

to the “OUTLET” socket on the tank.

Note: Once all connections have been

properly made, ll tank by opening

the cold water inlet and bleed all lines

according to appropriate plumbing code.

Safety Information

For safe performance this water heater

is tted with:

• an over-temperature energy cut-out

thermostat

• a combination Pressure &

Temperature Relief Valve.

These devices must not be tampered

with or removed. The water heater must

not be operated unless both of these

devices are tted and in working order.

The element cover should be removed

only by a qualied electrician. The

electrical power supply must be

isolated at the main electrical supply

switchboard before the water heater

electrical cover is removed.

Insulation of Pipes

All hot water pipes must be insulated

with UV stabilized insulation suitable

for solar working temperatures, e.g.

Armaex Insulation. Please check local

regulations regarding the use of hot

water supply pipework other than pipes

made of copper.

Temperature Protection

All solar water heaters have the

ability to produce hot water very

quickly. To reduce the risk of scald

injury, it is mandatory under the

requirements of Australian Standard

AS/NZS3500.4:2003 that a suitably

approved temperature control device be

tted to the hot water supply to outlets

used primarily for personal hygiene.

This valve should be checked at regular

intervals to ensure its operation and

settings remain correct.

Note: This water heater is supplied

with a tempering valve. Install the

valve according to the manufacturer’s

recommendations. Any adustments to

the valve should be made according to

the manufacturer’s recommendations.

The tempering valve should be checked

at regular intervals to ensure its

operation and settings remain correct.

Plumbing Connections

Owner’s Manual – Dux Electric Boosted Solar

H3161 025248 Rev. D

FRONT VIEW

RIGHT VIEW

LEFT VIEW

59.5°

TOP VIEW

Specifications 250L 315L 400L

Storage Capacity (L) 259 324 416

Hot Water Delivery (L) 250 315 400

Net Weight Empty (kg) 81 94 114

Relief Valve Pressure (kPa) 1000 1000 1000

Dimensions (mm) 250L 315L 400L

Tank Height (A) 1444 1754 1704

Tank Diameter (B) 617 617 705

Tank Width (C) 712 712 801

Outlet (D) 1211 1521 1445

Inlet (E) 195 195 219

Solar Return (F) 628 838 642

System Components

Item

Number

Description

1 Solar electric tank assembly

2 Solar collector

3 Solar collector flow connection

4 Solar collector flow pipe

5 Automatic air vent valve

6 Solar collector return pipe

7 Non return valve

8 Solar module

Specifications

Owner’s Manual – Dux Electric Boosted Solar

8H3161 025248 Rev. D

Installer’s Guide

Full installation instructions for the

collectors are in the Installer’s Guide,

included inside the water heater’s carton.

Safety

Do not commence an installation until

you have satised yourself that all safety

issues associated with working on and

lifting components onto a roof have

been addressed.

Local Authority Regulations

All work associated with the installation

must comply with local authority

regulations, including AS/NZS 3500.4.2.

Where these installation instructions and

local regulations are in conict, local

regulations must prevail.

Location of Collectors

There are several factors to consider in

selecting the collector location site:

• For best performance, the collectors

need to face true north. Due to the

high solar energy levels experienced

in Australia, installations on angles

of up to 45° away from true

north should not have a major

effect on the annual solar output.

Consequently, installations up

to 45° away from true north

are acceptable. See Collector

Orientation Compass on page 9.

• If the collectors are installed with an

east facing bias, the best solar input

is achieved in the morning and if

there is a west facing bias, the best

solar input is in the afternoon.

• The collectors should be installed

with a minimum inclination of 10°

and a maximum inclination of

45°. See Collector Inclination Guide

on page 9.

• Careful site inspection is required to

ensure the selected location is not

subjected to shading from adjacent

trees or buildings at any time of the

day, but particularly between 9am

and 3pm, the highest solar input

times.

• Remember that shadows are longer

in winter than in summer, so a

site that is free of shadows from

adjacent objects in summer may

have some shadows in winter.

• To optimise efciency, the collectors

should be as close as possible to

the storage tank.

• For best performance, the collectors

should be located no more than

20m from the storage tank.

• Ensure that the roof structure is

suitable to support the weight of

the collectors. The collectors weigh

approximately 40kg each when full.

Installation of Collectors

Andere Handbücher für 2F136S

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dux Boiler Handbücher

Dux

Dux AiroHeat D2FH00000C Bedienungsanleitung

Dux

Dux 135D5N Bedienungsanleitung

Dux

Dux 26ENG5N Bedienungsanleitung

Dux

Dux ProFlo 80T118 Bedienungsanleitung

Dux

Dux 26ENG5L Bedienungsanleitung

Dux

Dux 26ECB5N Bedienungsanleitung

Dux

Dux 26XL Montageanleitung

Dux

Dux Prodigy 5 330T Bedienungsanleitung

Dux

Dux proflo N135T118 Bedienungsanleitung

Dux

Dux 135ZB4N Bedienungsanleitung

Dux

Dux Endurance 16 Bedienungsanleitung

Dux

Dux Prodigy 4 Bedienungsanleitung

Dux

Dux 21ENB5N Bedienungsanleitung

Dux

Dux Proflo 25W124 Bedienungsanleitung

Dux

Dux 135ZN Bedienungsanleitung

Dux

Dux Proflo 80F1 Bedienungsanleitung

Dux

Dux DN15DS Montageanleitung

Dux

Dux Radiant 135AN Bedienungsanleitung

Dux

Dux Endurance six Bedienungsanleitung

Dux

Dux ecosmart 200DHA20 Montageanleitung

Dux

Dux 25V1 Bedienungsanleitung

Dux

Dux Proflo 80F1 Bedienungsanleitung

Dux

Dux Proflo 25S124P Bedienungsanleitung

Dux

Dux 2F136S Montageanleitung

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

Applimo

Applimo Edel AIR Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung

PVI

PVI MAXIM Bedienungsanleitung