Dyson DC14 Telescope Reach Bedienungsanleitung

User Guide

Please read this guide carefully before using your DC14

H AFRICA OPS MANUAL

x (H)297 mm LANDSCAPE

OD FREE

FIRMED

OMALIN AT 100% OF FINAL SIZE

LSION DOWN POSITIVES @100% FINAL SIZE

OGRAPHY

NT SPEC

Box contents

• Please see the back of the manual for

optional accessories.

• If you have any questions, please call

the Dyson helpline (details on back

page) or log onto www.dyson.com

Important information

Hose

Wand release

On/off switch

Cyclone release catch

and bin emptying trigger

Stair tool

Airway inspection valve

Valve release clips

Soleplate

Shroud

Brush tool Crevice tool

Wand cap

Upper cable winder

Lower cable winder

U bend release clip

Airway inspection (u bend)

Wand

Brushbar on/off

(brush control models only)

Hose release

Optional: Mini

turbine head

Filter release catch

Optional: Low

reach floor tool

Assembling your Dyson

vacuum cleaner

• Ensure the wand cap is closed.

• Ensure hose is kept straight when

inserting wand into hose.

ASlide hose into runners at back

of machine and click into place.

BSlide wand straight down in to

hose until it clicks into place.

Click wand handle into top

of machine.

Click tools into place. Wind cable anti-clockwise around

cable winders and secure with clip.

Important information

Brush tool

Crevice tool

Stair tool

Using your Dyson

vacuum cleaner

•Do not press the cyclone release

catch whilst carrying the machine or

it could fall and cause injury.

• Ensure the cyclone is secured to the

machine.

• Do not shake the machine

whilst carrying or it could fall and

cause injury.

• Keep hair and loose fabrics away

from wand cap when machine is on.

Anti-jam brushbar

(models with brush control)

DC14 models without brush control

are not suitable for hard floors, as

the brushbar cannot be turned off.

We recommend brush control

models for homes with mixed

flooring.

Ensure the machine is fully upright

before adjusting the setting.

For hard floors

For carpets

Plug in and press on/off button.

Push cleaner head down with foot

and pull handle towards you.

Telescope ReachTM Wand

ALift up wand cap.

BPull metal wand from inside

handle until it clicks.

Carrying your Dyson

Ensure machine is upright before

carrying. Use the carry handle at

the top of the cyclone to lift.

CPress button to release hose and

wand handle from machine.

DTo push wand back inside hose,

ensure hose is straight. Press the

release catch and push wand

back inside wand handle.

Important information

• The machine is intended for

domestic use only.

• Fine dust such as plaster dust

should only be vacuumed in very

small amounts.

B D

Using your Dyson

vacuum cleaner

• Ensure machine is in upright

position before using tools.

• Ensure hair and loose clothing are

kept clear of wand cap when

machine is switched on.

• Ensure wand cap is closed, unless

using with tools.

• Powerful suction can cause the

hose to ‘pull back’. Please take

care when cleaning stairs.

Hose mode

BWith wand extended, press side

buttons to remove wand handle

from the hose.

CThe tools can be fitted directly to

the end of the hose.

Stair cleaning

Always work with the machine at

the bottom of the stairs.

Important information

Wand mode

ATools can be fitted directly to

the end of the wand for

hard-to-reach places.

Emptying the clear binTM

• Turn power off and unplug before

emptying the bin.

• Do not use the machine without

the clear binTM in place.

Empty bin as soon as the MAX

mark is reached. Press catch to

release cyclone and bin from the

machine.

Option 1

Push the button as shown to empty

directly into dustbin.

Option 2

Emptying into bag is

recommended for allergy sufferers.

Place bin in bag and push button.

Let the dust settle and close bin

base securely before removing

from bag and refitting bin on

machine.

Important information

The British Allergy Foundation

considers that this product may in

proper use reduce exposure to

both House Dust Mite (Der p 1)

and Cat Allergen (Fel d 1). It is strongly recommended

that a sensitive person should take care when emptying

the clear bin. We recommend the manufacturer's

emptying instructions should be strictly followed.

The British Allergy Foundation is a UK national charity

(Charity Reg. No. 1003726) founded in 1991 with the

aim of improving awareness, prevention and treatment

of allergies.

Cleaning the clear binTM

• Do not use detergents,

polishes or freshening

products.

• Do not immerse the cleaner

in water.

• Ensure the bin is completely dry

before refitting.

Cleaning the shroud (optional)

Ensure bin is empty and bin base is

open. Press catch A to release the

clear bin from the cyclone.

Clean shroud with a cloth or dry

brush to remove fluff.

Cleaning the clear binTM (optional)

• Ensure bin is empty and bin base

is open.

• Rinse with cold water only.

• Ensure bin is dry before replacing.

Re-assembling the clear binTM

AHolding carry handle, fit cyclone

assembly inside the bin.

BLine up the front and rear guides

and push down to secure.

Important information

Washing the filter at

least every 6 months

• Turn power off and

unplug before emptying the bin

Check your filter regularly and

wash at least every six months.

The filter may require more

frequent washing if vacuuming

fine dust.

Do not use the machine without

the filter in place.

Do not use detergent.

Do not put the filter in the

dishwasher, washing machine,

oven, tumble dryer, microwave or

near a naked flame.

Remove cyclone from machine. Press

catch Ato release cyclone pack.

Accessing the filter

Lift filter release catch Band

remove filter from machine.

BWash filter and case in cold

water only. Repeat until water

runs clear.

CDry for at least 12 hours or

overnight. Ensure filter is

completely dry before refitting

onto the machine.

Important information

Washing the filter

ASeparate blue filter and yellow case.

• Wash filter and case in cold water only.

• Only wash blue foam and yellow case.

• Do not use detergent.

• Do not put the filter assembly in the

dishwasher, washing machine, oven,

tumble dryer, microwave or near a

naked flame.

Finding blockages

• Turn power off and unplug

before checking for blockages.

• If any part of the machine

becomes blocked, it may

automatically shut off. Unplug

machine and clear blockage

before restarting.

Please note: Clearing blockages

is not covered by your

machine’s guarantee. (Keep

your proof of purchase safe.)

Beware of sharp objects when

clearing blockages.

Refit all parts of the machine

securely before using it.

On models with brush control, a

ratchet noise warns that the

brushbar is obstructed. Ensure

machine is disconnected from

the power supply before

clearing the obstruction.

ACheck tools, wand and hose are

clear of blockages.

BTo remove the hose, press hose

release button at front of machine

and slide hose out.

U bend inspection

CTilt machine forward, slide out

U bend and check inside

for blockages.

Airway inspection valve

DSqueeze release catches and

check inside for blockages.

Brushbar obstructions

Remove wand and cyclone assembly

and turn machine upside down.

Undo fasteners using a coin and

remove soleplate.

Remove fluff and hair from brushbar.

Rest the 3 tabs on inside of yellow

bumper and replace soleplate,

tightening the fasteners.

Ensure soleplate is in correct position

before use.

Important information

Changing/fitting the belt

(machines without brush control)

• Turn power off, unplug machine

and allow machine to cool for

1 hour before changing/fitting

belt.

• Ensure soleplate is in correct

position before use.

Remove wand and cyclone assembly

and turn machine upside down.

AUndo fasteners using a coin and

remove soleplate.

B Remove fluff and hair from

brushbar and check metal

spindle is clean.

C To replace the belt, remove the

brushbar, loop belt around

brushbar and feed through

hole. Using back of cleaner as a

lever, loop belt around thumb.

Turn the belt 90 degrees, stretch

and release over spindle. Belt

must be free of twists as shown.

D Replace the brushbar and check

end caps are secure. Rotate the

brushbar to centralise belt.

ERest the 3 tabs on inside of

yellow bumper and replace

soleplate, tightening the

fasteners.

FEnsure soleplate is in correct

position before use.

Important information

Andere Handbücher für DC14 Telescope Reach

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson DC29 dB Bedienungsanleitung

Dyson

Dyson DC22 Bedienungsanleitung

Dyson

Dyson V7 Motorhead Bedienungsanleitung

Dyson

Dyson Cyclone V10 Bedienungsanleitung

Dyson

Dyson DC33 Bedienungsanleitung

Dyson

Dyson DC29 Bedienungsanleitung

Dyson

Dyson DC11 Telescope Bedienungsanleitung

Dyson

Dyson DC34 ANIMAL Bedienungsanleitung

Dyson

Dyson DC35 MULTI FLOOR Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC35 MULTI FLOOR Bedienungsanleitung

Dyson

Dyson DC26 Bedienungsanleitung

Dyson

Dyson DC37 Bedienungsanleitung

Dyson

Dyson DC40 Bedienungsanleitung

Dyson

Dyson DC37 Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson DC19T2 Bedienungsanleitung

Dyson

Dyson DC34 ANIMAL Bedienungsanleitung

Dyson

Dyson DC50 Ball Compact Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson DC31 Bedienungsanleitung

Dyson

Dyson DC17 Asthma and Allergy Bedienungsanleitung

Dyson

Dyson DC57 Bedienungsanleitung

Dyson

Dyson DC44 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch