Dyson Outsize Bedienungsanleitung

User manual

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

In the box

Getting started

The LCD screen

Caring for your floors

Charging your machine

Changing your click-in battery

Emptying your bin

Cleaning your bin

Clearing blockages

Clearing obstructions from your

Digital MotorbarTM XL cleaner head

Clearing blockages from your

Hair screw tool

Washing your filter

Washing your Laser Slim FluffyTM

cleaner head brush bar

Cleaning your tools

Looking after your machine

Some tools and accessories may not be included.

You can buy additional tools and accessories at www.dyson.com.au or www.dyson.co.nz

Vacuum cleaner

Stubborn dirt brush

Fabric and

mattress tool

Two tools in one –wide

nozzle and brush,

for quick switching

between cleaning and

dusting tasks around

your home or car.

Bends to comfortably reach

down low. Engineered to

clean further under low

furniture by adjusting the

wand angle up to 90°.

Crevice toolCombination tool

Low-reach adaptor

Digital Motorbar™XL

cleaner head

Stiff nylon bristles

dislodge ground-in dirt

from coarse carpets,

high traffic areas and

car interiors.

Removes dust, dirt

and allergens from

mattresses and

upholstery.

Engineered for precise

cleaning around

tricky edges and into

hard-to-reach narrow

spaces.

De-tangling vanes

automatically clear

wrapped hair from the

brush bar as you clean.

Dyson Floor Dok

The Dyson vacuum drops

into the dock so it’s easy

to charge and put away,

ready to grab and go

when you need it.

In the box

Your machine will come with one or more of

these cleaner heads and dok types - not all

will be included.

Charger

Charges your vacuum

with or without a dock.

Hair screw tool

Mini motorised tool

Anti-tangle conical

brush bar spirals hair

off and into the bin.

Motor-driven cleaning

for smaller spaces.

Motorised brush bar,

concentrated in a

smaller head to remove

stubborn dirt from

mattresses, upholstery

and stairs.

Soft dusting brush

Enclosed in a skirt of soft

nylon bristles for gentle,

vacuum-assisted dusting

of delicate objects and

surfaces.

Wand

Not all models are supplied with

an additional click-in battery.

You can buy additional click-in

batteries at www.dyson.com.

Additional click-in battery

Wand clip

Clips to your vacuum's

wand to hold tools.

Wall dock

The Dyson cordless

vacuum drops into

the wall-mounted

charging dock, ready

for your next clean.

The Laser Slim

FluffyTM cleaner head

makes invisible dust

visible on hard floors.

Laser Slim FluffyTM

cleaner head

Up-top adapter

Bends and locks at

different angles. Fits

any compatible tool

for effective cleaning

in hard-to-reach high

areas of your home.

Main body showing

the handle and bin

attached.

A brush bar located inside

the cleaner head and

a suction control slider

located on the front.

A soft fluffy brush bar

housed within the

cleaner head. There is

an electrical connecter

end that can attach to

the end of the wand or

directly to the machine.

A rectangular battery with an

slanted connector that slides into

the handle of the main body of

the machine.

A rectangular

dock that

needs to be

fixed to a wall

with screws.

The charger is a one

piece unit with the plug,

connector end and

cable.

A floor standing dock

with a round base and

a cylindrical support

with the support for

your machine at the

top. Slide the battery

section of your machine

into the dock where it

then connects to the

charging points.

The narrow connector end at the top, this connects to the bin and the

wider end at the bottom that connects to the cleaner head or tool.

A long tool with

an angled end.

With an elbow

joint, fitted

between the bin

and the tool.

This tool has a

combination

of brush head

and crevice tool

together in one

unit. The brush

head slides down

the crevice tool

when needed.

A small cleaner head

with an angled body

housing the motor and

an electrical connector

to attach to the wand or

directly to the machine.

Pliable bristles and

felt bumper strip on a

narrow, tapered tool.

A short nozzle with stiff

bristles on the underside.

A wide, triangular

shaped nozzle.

A plastic clip that

attaches to the wand

Getting started

Eco

中文

한국어

Boost

中文

한국어

Auto

Power modes

Eco mode

Auto and Med mode

Boost mode

Your machine has three power modes for

different tasks. Change power modes quickly

using a single button.

Maximum run time for longer cleans all

around your home.

The optimum balance of power and run time.

Attach your Digital Motorbar™XL cleaner

head to activate Auto mode. Dyson DLS™

technology automatically changes motor

speed between floor types.

Designed for intensive spot

cleaning of ground–in dirt.

Med

click click

Pointers to demonstrate

that the tools can be

connected directly to

the main body or to the

end of the wand.

This tool has a combination of brush head and

crevice tool together in one unit. The brush head

slides down the crevice tool when needed.

Diagram showing the

connection of the wand

onto the main body,

with the wand release

button aligned with the

top of the main body.

Arrow showing the end

of the wand connecting

to the cleaner head.

The screen showing the machine set to

Eco mode with a full battery in green

to show that this will give the longest

battery life of the three modes.

The screen showing the machine set

to Boost mode with a red battery to

show that this will give the shortest

battery life of the three modes.

Two screens showing the machine set

to Auto mode and Med mode with a

blue battery showing that this will give

a medium length of battery life.

The LCD screen

Settings menu

Change language

Change alert settings

The LCD screen shows the cleaning mode selected, remaining run time,

filter maintenance and blockage information.

To change the language on your screen, press the button and hold until the

language list appears. Release the button.

Tap the button to scroll through the language list to your preferred language.

Press and hold the button until the countdown ends.

A green tick will appear on the screen to show your language selection is

complete.

To cancel your selection, release the button during the countdown.

You can turn the alert motor pulse off. Your motor will no longer pulse but

run time alert information will continue to be displayed on the LCD screen

when your machine needs your attention.

Turning off alerts will not turn off the blockage alert pulsing. This is to ensure

you clear any blockages, preventing damage to your machine.

Tap to scroll through the settings menu. Select the ‘Alerts’ option.

Scroll to select on or off. Hold the button until the countdown ends and a tick

appears on the screen. To cancel your selection, release the button during

the countdown

English

Espanol

English

selected

Control the settings on your machine using the Selection button.

To enter the settings menu, press and hold the button until the menu screen

appears. Tap to scroll through the options available. The Selection button

on the screen being

pressed.

Two screens, the first with

the language list and then

the tick screen to show that

the language has been

successfully changed.

The screen with an

amber warning

triangle to demon-

strate an alert.

Battery health

Run time countdown

Alerts

To get the best performance and life from your battery,

use Eco or Auto/Med mode.

When the battery needs charging, your machine will pulse three times and a

low run time icon will appear on the screen.

When your battery is empty, a red warning icon will appear on the screen.

The alerts you might see are:

Filter – the filter isn’t fitted correctly, or needs cleaning.

Blockage – your machine has a blockage that needs removing.

4:50

Exit settings menu

To exit the settings menu, tap to scroll through the selection menu.

Select ‘Exit menu’.

When Particle count and graph is turned on, low run time will be in amber

and red when in Boost mode.

The screen with a

battery time remaining

shown as a number and

as a half filled battery.

The battery health is

shown on the batter-

ies on the screen.

A red screen with an icon

with a plug being con-

nected to the power sup-

ply. This demonstrates

the battery is empty and

needs charging.

Alert icon with Filter

not sealed wording.

Alert icon with

Airways blocked

wording.

Alert icon with Filter

needs cleaning

wording.

Screen with Exit

menu wording and

return icon.

Alert icon with Fully

charge before first

use wording.

Caring for your floors

Charging your machine

Changing your click-in battery

Check that the underside of the cleaner head or tool is clean and free from

any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the

manufacturer’s recommended cleaning instructions.

The brush bar on your machine can damage certain flooring. Some rug

materials may fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorised floor tool and

consulting with your flooring manufacturer.

Connect to the charger either directly or in the dock.

The blue LEDs on either side of the battery will flash during charging.

When the battery is fully charged, both LEDs will light for 5 seconds.

Your battery is fully charged when the display shows 100%.

Your machine won’t operate or charge if the ambient temperature is below

5°C (41°F). This is designed to protect both the motor and battery.

If you have additional click-in batteries, we recommend that you alternate

the batteries to maintain even performance.

Additional click-in batteries available to purchase separately.

Removing your battery

Refitting your battery

Push the Battery release button on the handle and slide the battery off

your machine.

Charge the battery.

Align your battery with the handle and slide it in. Push firmly until it clicks

into place.

4.5hrs

clik

The charger connected from

the power supply directly into

the front of the battery.

Arrows showing the location of the Battery

release button and the battery coming off the

handle when the button is pressed. The battery

is then shown being replaced on the base of the

handle, clicking into place.

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your

machine when the dirt is above the MAX line may affect the performance

and require more frequent filter washing.

Remove your wand

Close the bin

Press the red wand release button, on the top of the wand, and pull the wand

away from the bin.

Release the dirt

Hold the machine over the bin, pointing downwards.

Firmly push the red bin release button. The bin will slide down, cleaning the

shroud as it goes, and the bin base will open.

The bin base won’t open if the red bin release button isn’t pushed down all

the way.

Minimise dust contact

Cover your bin tightly in a dust proof bag while you empty. Remove your bin

carefully, seal the bag tightly and dispose.

Push the bin base upwards until your bin and bin base click into place.

clik

Illustration of the bin being

emptied into a bag with

images demonstrating to take

care not to press the trigger

when emptying the bin.

The bin lid closing with

an audible click and

the bin being pushed

upwards with another

click once it is fully in

place.

The MAX mark on the bin of

the machine, showing that

the dirt should not be filled

over the Max mark when the

machine is at the angle of

normal use.

Arrows pointing to the location of

the wand release button on the

top of the wand and an arrow

that represents the wand being

removed from the machine.

Cleaning your bin

Clearing blockages

Remove your bin

If it is necessary to clean your bin, empty it as shown in the ‘Emptying your

bin’ section.

Press the red button located on the bin runner to release the bin and slide

your bin off the runner.

Only use a damp, lint-free cloth to clean your bin.

Make sure that your bin and seals are completely dry before replacing.

Refit your bin

Disconnect your machine from the charger before looking for blockages.

Be careful not to touch the power button and be aware of sharp objects.

Leave your machine to cool down before looking for blockages.

Don't use your machine when looking for blockages as this could cause injury.

If your machine detects a blockage, the motor will pulse six times. You won’t

be able to use your machine until the blockage has been cleared.

If you try to use your machine when the motor is pulsing, it will automatically

cut out.

Leave your machine to cool down before looking for blockages and, for your

safety, take care not to touch the trigger.

Insert the spine on to the bin runner.

Close your bin by pushing the bin base upwards until the bin and bin base

click into place.

Your bin isn’t dishwasher safe and the use of detergents, polishes or air

fresheners to clean your bin isn’t recommended, as it may damage

your machine.

clik

With the wand

removed from the

machine, check for

blockages at both

ends of the wand.

Turn the cleaner head over

to check for obstructions on

the brush bar and air inlet.

With the bin removed, check for blockages,

paying particular attention to the air inlet,

located at on the right–hand side of the

machine just below the point where the bin

joins the main body of the machine.

The bin being removed and

the location of the bin release

lever on the underside of the

bin runner.

The bin being pushed

back into position on

the bin runner.

The bin lid closing with

an audible click and

the bin being pushed

upwards with another

click once it is fully in

place.

Replace your brush bar

Your Digital MotorbarTM XL cleaner head doesn't have a washable brush bar.

To maintain optimum performance, check your brush bar regularly and clear

any obstructions.

Make sure your machine is disconnected from the charger and take care not

to touch the trigger.

Clearing obstructions from your

Digital MotorbarTM XL cleaner head

Remove your brush bar

Look for obstructions

Don’t put any part of your machine in a dishwasher or use detergents,

polishes or air fresheners.

Press the cleaner head release button on the end of the wand.

Place the cleaner head upside down.

Lift the catch on the cleaner head to release the brush bar.

Slide your brush bar out of the cleaner head.

Push the brush bar back into the cleaner head.

Push down the brush bar release catch until it locks in position.

Clear any debris from your brush bar.

Check inside the cleaner head and remove any debris or blockages.

Your Digital MotorbarTM XL cleaner head and brush bar aren't washable.

Wipe over with a damp lint-free cloth.

The brush bar release is

located on the back of the

cleaner head on the left hand

side. The brush bar pulls out

of the opposite end of the

cleaner head.

Remove the cover and brush bar

Look for obstructions

Re–assemble Hair screw tool

Your Hair screw tool doesn't have a washable brush bar. To maintain optimum

performance, check your brush bar regularly and clear any obstructions.

Make sure your machine is disconnected from the charger and take care not to

touch the trigger.

Remove the Hair screw tool from the wand or machine.

Push the base plate open. Press the red lever down to release the cleaner

head cover.

Pull the cleaner head cover off the main body of the tool.

Pull your brush bar firmly to remove it from the main body.

Check and remove any obstructions from all three parts of your

Hair screw tool.

Your Hair screw tool isn't washable. Wipe over with a damp lint-free cloth.

Don’t put any part of your machine in a dishwasher or use detergents,

polishes or air fresheners.

Put your brush bar back into position and press firmly until it clicks back

into position.

Check the red locking lever is in the unlocked position. Align the cleaner

head cover with the guide on the main body. Push it down until it clicks into

position.

Push the red locking lever up until it clicks into position and push the base

plate back into place.

Clearing blockages from your

Hair screw tool

Location of the lever

to release the brush

bar is located at

the back of the Hair

screw tool.

Slide the housing

back on to the

brush bar and

push the lever on

the back of the

Hair screw tool

upwards to lock.

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson 368339-01 Bedienungsanleitung

Dyson

Dyson DC42C ErP Allergy Bedienungsanleitung

Dyson

Dyson DC 33 C Bedienungsanleitung

Dyson

Dyson DC14 Telescope Reach Bedienungsanleitung

Dyson

Dyson CINETIC BIG BALL ABSOLUTE Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson DC03 Absolute+ Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC17 Asthma and Allergy Installationsanleitung

Dyson

Dyson DCO1 Bedienungsanleitung

Dyson

Dyson DC 23 Bedienungsanleitung

Dyson

Dyson Root 6 Bedienungsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Dyson

Dyson DC31 Bedienungsanleitung

Dyson

Dyson DC40 Bedienungsanleitung

Dyson

Dyson DC26 Bedienungsanleitung

Dyson

Dyson BIG BALL Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson DC14 Telescope Reach Bedienungsanleitung

Dyson

Dyson DC43H Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung