Dyson Slim Bedienungsanleitung

User manual

In the box

Getting started

Charging your machine

Changing your click-in battery

Caring for your floors

The LCD screen

Emptying your bin

Cleaning your bin

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

Washing your filter

Clearing blockages

Washing your brush bar

Cleaning your tools

Looking after your machine

The Dyson cordless

vacuum cleaner in

a horizontal position with

the wand and cleaner

head attached.

Dyson Digital slim

In the box

Vacuum cleaner Slim Fluffy™cleaner head

Engineered for hard floors.

Sucksupfine dust and large

debrissimultaneously.

Click-in battery

Remove and replace at

the press of a button to

double your run time.

Additional click-in battery

Wand Charger

Charges your vacuum with

or without a dock.

Some tools may not be included.

You can buy additional tools at www.dyson.co.th.

Combination tool

Two tools in one –wide

nozzle and brush,

for quick switching

between cleaning and

dusting tasks around

your home or car.

Crevice tool

Engineered for precise

cleaning around

tricky edges and into

hard-to-reach narrow

spaces.

Mini motorised tool

Motorised brush bar,

concentrated in

a smaller head to

remove stubborn

dirt from mattresses,

upholstery and stairs.

Low-reach adaptor

Bends to comfortably

reach down low.

Engineered to clean

further under low

furniture by adjusting the

wand angle up to 90°.

Flexi crevice tool

Extends and bends.

For hard-to-reach

places around your

home and car.

Light pipe crevice tool

Crevice tool with LED

lights lets you reach into

dark, narrow spaces

and see where you’re

cleaning.

Soft dusting brush

Enclosed in a skirt

of soft nylon bristles

for gentle, vacuum-

assisted dusting of

delicate objects and

surfaces.

Stubborn dirt brush

Stiff nylon bristles

dislodge ground-in dirt

from coarse carpets,

high traffic areas and

car interiors.

Mattress tool

Removes dust, dirt

and allergens from

mattresses and

upholstery.

Up-top adapter

Twists into different

positions and angles

for easy high-reach

cleaning.

Extension hose

Adds up to 61cm of

flexible reach to any tool

attachment, to clean up

high or down low in your

home or car.

Wand clip

A flexible hose

engineered from

tough wire and

durable plastic.

A long tool with

an angled end

and electrical

connector end

that powers

LED lights when

connected to the

machine.

A long tool with

an angled end.

This tool has

acombination

of brush head

and crevice tool

together in one

unit. The brush

head slides down

the crevice tool

when needed.

A small cleaner head

with a body housing the

motor and an electrical

connector to attach to

the wand or directly to

the machine.

A wide mouth tool

with a lint edge.

Stiff bristles on

a wide head.

Pliable bristles

and felt bumper

strip on a narrow,

tapered tool.

Main body showing the

handle and bin attached.

A soft fluffy brush bar

housed within the

cleaner head. There is

an electrical connecter

end that can attach to

the end of the wand or

directly to the machine.

The charger is a one

piece unit with the

plug, connector end

and cable.

A jointed

connectorthat

creates aflexible

joint between the

machine and the

tool. It must be

usedin conjunction

with a tool or

cleaner head.

A long tool with

anangled end

with the addition

of an extendible

flexible section,

extended using the

button located at

the brush end of

the tool.

A flexible joint

between the

machine and the

tool. It must be

used in conjunction

with a tool or

cleaner head.

Getting started

Fully charge your machine before

using for the first time.

Power modes

Your machine has three power modes

for different tasks. Change power

modes quickly using a single button.

Eco mode

Maximum run time for longer cleans

all around your home.

Med mode

The optimum balance of

power and run time.

Boost mode

Designed for intensive spot

cleaning of ground–in dirt.

Slim Fluffy™cleaner head

Engineered for hard

floors. Sucks up fine

dust and large debris

simultaneously.

clik clik

Arrow showing the

end of the wand

connecting to the

cleaner head.

The screen showing the

machine set to Boost

mode with a red battery to

show that this will give the

shortest battery life of the

three modes.

The screen showing the

machine set to Eco mode

with a full battery in green

to show that this will give the

longest battery life of the

three modes.

Location of the Selection

button on the screen on the

filter end of the machine.

Diagram showing the

connection of the wand

onto the main body,

with the wand release

button aligned with the

top of the main body.

The screen shows the

machine set to Med

mode with a blue

battery showing that

this will give a medium

length of battery life.

Charging your machine

It’s important to fully charge your new machine before using it for the first

time, and after every clean. This is because the battery and monitoring

system’s algorithm ‘learns’ over time, and fully charging your machine helps

it to more accurately calculate and display remaining run time.

Connect to charger either directly or in the dock.

The blue LEDs on either side of the battery will flash during charging.

When the battery is fully charged, both LEDs will light for 5 seconds.

Your battery is fully charged when the display shows 100%.

Your machine won’t operate or charge if the ambient temperature is below

5°C(41°F). This is designed to protect both the motor and battery.

You can help prolong the battery life by leaving your machine to cool down

before recharging.

Changing your click-in battery

If you have additional click-in batteries, we recommend that you alternate the

batteries to maintain even performance.

Removing your battery

Push the Battery release button on the handle and slide the battery

off your machine.

Charge the battery.

Refitting your battery

Align your battery with the handle and slide it in. Push firmly until it

clicks into place.

Caring for your floors

Check that the underside of the cleaner head or tool is clean and free from

any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your machine can damage certain carpet types and floors.

Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorised floor tool and

consulting with your flooring manufacturer.

The charger connected from

thepower supply directly

into the front of the battery.

Arrows showing the location of the Battery release button and

the battery coming off the handle when the button is pressed.

The battery is then shown being replaced on the base of the

handle, clicking into place.

The charger connected

from the power supply

using the wall dock.

The LCD screen

The LCD screen shows current performance, including selected cleaning

mode, remaining run time, filter maintenance and blockage reports.

Settings menu

Control the settings on your machine using the button.

Toenterthesettingsmenu, press and hold the button until the menu screen

appears. Tap to scroll through the options available.

For more information and support for your machine go online:

https://www.dyson.co.th/en-TH/support/support.

Change language

To change the language on your screen, press the button and hold until the

language list appears. Release the button.

Tap the button to scroll through the language list to your preferred language.

Press and hold the button until the countdown ends.

A green tick will appear on the screen to show your language selection

is complete.

To cancel your selection, release the button during the countdown.

Change alert settings

You can turn the alert motor pulse off. Your motor will no longer pulse but

run time alert information will continue to be displayed on the LCD screen

when your machine needs your attention.

Turning off alerts will not turn off the blockage alert pulsing. This is to ensure

you clear any blockages, preventing damage to your machine.

Tap to scroll through the settings menu. Select the ‘Alerts’ option.

Scroll to select on or off. Hold the button until the countdown ends and a tick

appears on the screen. To cancel your selection, release the button during

the countdown.

The Selection button on

the screen being pressed.

Two screens, the first with

the language list and then

the tick screen to show that

the language has been

successfully changed.

The screen with an amber

warning triangle to

demonstrate an alert.

Run time countdown

When the battery needs charging, your machine will pulse three times and

alow run time icon will appear on the screen.

When your battery is empty, a red warning icon will appear on the screen.

Battery health

To get the best performance and life from your battery, use Eco or Med mode.

Alerts

The alerts you might see are:

Filter – the filter isn’t fitted correctly, or needs cleaning.

Blockage – your machine has a blockage that needs removing.

Exit settings menu

To exit the settings menu. Tap to scroll through the selection menu.

Select‘Exit menu’.

Screen with Exit menu

wording and return icon.

Alert icon with

Fully charge

before first use

wording.

Alert icon with

Filter needs

cleaning

wording.

Alert icon

with Airways

blocked

wording.

Alert icon

with Filter

not sealed

wording.

The battery health is

shown on the batteries

on the screen.

A red screen with an

icon with a plug being

connected to the power

supply. This demonstrates

the battery is empty and

needs charging.

The screen with

a battery time remaining

shown as a number

andas a half filled

battery.

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your

machine when the dirt is above the MAX line may affect the performance

and require more frequent filter washing.

Remove your wand

Press the red wand release button, on the top of the wand, and pull the

wand away from the bin.

Release the dirt

Hold the machine over the bin, pointing downwards.

Firmly push the red bin release button. The bin will slide down, cleaning the shroud

as it goes, and the bin base will open.

The bin base won’t open if the red bin release button isn’t pushed down all the way.

Minimise dust contact

Cover your bin tightly in a dust proof bag while you empty. Remove the bin

carefully, seal the bag tightly and dispose.

Close your bin

Push the bin base upwards until the bin and bin base click into place.

Cleaning your bin

Remove your bin

If it is necessary to clean your bin, empty it as shown in the ‘Emptying your bin’ section.

Press the red button located on the bin runner to release the bin and slide your bin off the runner.

Only clean your bin with a damp cloth.

Make sure that the bin and seals are completely dry before replacing.

Refit your bin

Insert the spine on to the bin runner.

Close your bin by pushing the bin base upwards until the bin and bin base click into place.

Your bin isn’t dishwasher safe and the use of detergents, polishes or air fresheners to clean your

bin isn’t recommended, as it may damage your machine.

The MAX mark on the bin of

the machine, showing that

the dirt should not be filled

over the Max mark when the

machine is at the angle of

normal use.

The bin lid closing with

an audible click and

the bin being pushed

upwards with another

click once it is fully

inplace.

Illustration of the bin being

emptied into a bag with

images demonstrating to take

care not to press the trigger

when emptying the bin.

Two images of the bin with

arrows showing the bin lid

closing and a click symbol

and the bin being pushed

upwards with another click

symbol.

The bin being removed

and the location of the

bin release lever on the

underside of the bin

runner.

The bin being pushed

back into position on

the bin runner.

Washing your filter

For more information and support for your machine go online: https://www.dyson.co.th/en-TH/support/support.

Wash your filter at least once a month to maintain optimum suction power.

Twist off your filter

Twist your filter anti-clockwise and pull it away from your machine.

Tap your filter

Before washing your filter, tap it gently over a bin to remove any loose dust

and debris.

Wash your filter

Wash with warm, running tap water – gently rubbing your filter with your fingers

to remove the dirt.

Fill and shake

Place your hand over one end of your filter.

Fill the filter with warm tap water.

Place your hand over the open end of the filter and shake it firmly to remove

trapped dirt and debris.

Repeat these steps until the water runs clear.

Shake out the water

Empty the filter and shake firmly to remove excess water.

Shake with the filter in both an upward and downward position.

Keep shaking until there’s no water coming from the filter.

Dry your filter

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Don’t dry your filter in a tumble dryer, microwave or near a naked flame.

Important: your filter must be completely dry before you put it back into the

machine. Your machine could be damaged if used with a damp filter.

Filter with hand over

the open end with

arrows showing

ashaking motion.

The filter is left to dry

with the pleated filter

end facing upwards.

A hand holding the filter with the

narrow end pointing downwards with

droplets of water being shaken from the

filter and again, with the end pointing

downwards shaking water out.

Filter held in upright

position, with the wider

end in the palm of

ahand. Water running

from a tap into the

narrower end.

The filter is located at the

rear of your machine.

Holding the filter

by the hard, plastic

end, tap the other

end over the bin.

Clearing blockages

Disconnect your machine from the charger before looking for

blockages. Be careful not to touch the trigger and be aware of

sharp objects.

Leave your machine to cool down before looking for blockages.

Don’t use your machine when looking for blockages as this

could cause injury.

If your machine detects a blockage, the motor will pulse six

times. You won’t be able to use your machine until the blockage

has been cleared.

If you try to use your machine when the motor is pulsing, it will

automatically cut out.

Leave your machine to cool down before looking for blockages

and, for your safety, take care not to touch the trigger.

clik

Turn the cleaner

head over to check

for obstructions on

the brush bar and

air inlet.

With the wand

removed from the

machine, check for

blockages at both

ends of the wand.

With the bin removed,

check for blockages,

paying particular

attention to the air

inlet, located at on the

right–hand side of the

machine just below

the point where the bin

joins the main body of

the machine. Check for blockages in

the filter end and bin

ends of the machine.

Remove any obstructions

from the brush bar.

The bin being removed

and the location of the

bin release lever on the

underside of the bin

runner.

Washing your brush bar

To maintain optimum performance, check and wash the brush bar regularly.

Remove brush bar

Don’t put any part of your machine in a dishwasher or use detergents, polishes

or air fresheners.

Press the cleaner head release button to remove it from the wand.

Pull the brush bar off the end cap and put the end cap to one side, don’t wash it.

Wash and dry brush bar

Hold your brush bar under cold tap water and gently rub to remove any lint

or dirt. Keep washing until the water runs clear.

Stand the brush bar upright and leave for at least 24 hours to dry.

Replace your brush bars

Make sure your brush bar is completely dry before refitting.

Reattach the end cap to the brush bar and slide it back into the cleaner head.

Rotate the end cap until it clips securely back into position.

The cleaner head housing is not washable and should only be wiped over

with a damp lint-free cloth.

The brush bar

reinserted into the

cleaner head and the

end cap rotated to

the locked position.

The end cap should be

attached to the cleaner

head at an angle less

than 90°, any angle

greater than this will

not allow the end cap

to close.

The brush bar has an open

end and a closed end. Stand

upright, with the closed end

facing upwards, to dry.

The end cap is located

at the side of the

cleaner head. Push

this upwards to unlock

the brush bar. Don’t

wash the end cap.

Andere Handbücher für Slim

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson V7 Motorhead Bedienungsanleitung

Dyson

Dyson DC27 Bedienungsanleitung

Dyson

Dyson Cyclone V10 Bedienungsanleitung

Dyson

Dyson V8 Absolute Bedienungsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Dyson

Dyson Ball Animal Bedienungsanleitung

Dyson

Dyson DC14 Telescope Reach Bedienungsanleitung

Dyson

Dyson V8 Absolute Bedienungsanleitung

Dyson

Dyson V6 Top Dog HH09 Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Dyson

Dyson DC 52 Bedienungsanleitung

Dyson

Dyson DC 52 Bedienungsanleitung

Dyson

Dyson V6 TRIGGER+ Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson DC 52 Bedienungsanleitung

Dyson

Dyson DC03 Bedienungsanleitung

Dyson

Dyson DC40 Bedienungsanleitung

Dyson

Dyson Cinetic Big Ball Bedienungsanleitung

Dyson

Dyson DC03 Absolute+ Bedienungsanleitung

Dyson

Dyson DC17 Asthma and Allergy Installationsanleitung

Dyson

Dyson DC29 Bedienungsanleitung

Dyson

Dyson dc77 Bedienungsanleitung

Dyson

Dyson small ball Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung