Dyson Slim Bedienungsanleitung

User manual

SV18 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

In the box

Assembling your machine

Getting started

The LCD screen

Caring for your floors

Charging your machine

Changing your battery

Emptying your bin

Washing your bin

Washing your filter

Washing your brush bar

Washing your powered tools

Washing your non-powered tools

Clearing blockages

In the box

Vacuum cleaner main body

Some tools may not be included.

You can buy additional tools at Dyson.com

Wand

Soft dusting brush

For vacuum-assisted

dusting on screens

and surfaces.

Low-reach adaptor

Bends so you don’t have to.

Engineered to clean further

under low furniture by

adjusting the wand angle

up to 90°.

Crevice tool

Engineered for precise

cleaning around tricky

edges and into hard-to-

reach narrow spaces.

Combination tool

Two tools in one –wide

nozzle and brush, for

quick switching between

cleaning and dusting tasks

around your home or car.

Extension hose

Adds up to 61cm of

flexible reach to any tool

attachment, to clean up

high or down low in your

home or car.

Mini motorised tool

Motorised brush bar,

concentrated in a smaller

head to remove stubborn

dirt from mattresses,

upholstery and stairs.

Flexi crevice tool

Extends and bends to reach

awkward narrow spaces

where dust settles around

your home and car.

Mattress tool

Removes dust, dirt and

allergens from mattresses

and upholstery.

Wand clip

Up-top adaptor

Bends and locks at different

angles. Fits any compatible

tool for effective cleaning in

hard-to-reach high areas

of your home.

Additional click-in battery

Stubborn dirt brush

Stiff nylon bristles dislodge

ground-in dirt from coarse

carpets, high traffic areas

and car interiors.

Light pipe crevice tool

Crevice tool with LED lights

lets you reach into dark,

narrow spaces and see

where you’re cleaning.

Charger

Charges your vacuum

with or without the dock.

Click-in battery

Remove and replace at the press

of a button to double your run time.

Slim FluffyTM cleaner head

Soft woven nylon and anti-static

carbon fibre for hard floors.

40% smaller and lighter than a

standard FluffyTM cleaner head.

Auto

Boost

Eco

Auto Med

100%

English

Ελληνικ

Espanol

Čeština

中文

한국어

English EnglishEnglish

Eco

Auto

Boost

Eco Auto Med

100%

English

Ελληνικ

Espanol

Čeština

中文

한국어

English EnglishEnglish

Eco

For intensive spot cleaning.

Maximum run time for longer

cleans all around your home.

Power modes

Your machine has three power

modes for different tasks.

Change power modes quickly

using a single button.

Setting up your language

To set up your language, tap the button to

activate the screen. Tap the button to scroll through

the language list to your preferred language.

Press and hold the button until the countdown

ends to set your language.

A green tick will appear on the screen to show

your language selection is complete.

To cancel your selection, release the button during

the countdown.

You can access a full list of available languages

by selecting ‘More+’ from the language list.

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English

selected

4:50 Auto

Low

run time

Exit

Off

Auto

Boost

Eco Auto

Med

100%

English

Ελληνικ

Espanol

Čeština

中文

한국어

English EnglishEnglish

Eco

The optimum balance

of power and run time.

Assembling your machine

clik clik clik

Caring for your

floors

Getting started

You can register your machine using the serial

number found on the bottom of your machine.

Fully charge your

machine before using

for the first time.

Check that the underside of the cleaner head

or tool is clean and free from any objects that

may cause damage.

Before vacuuming your flooring, check the

manufacturer’s recommended cleaning

instructions.

This machine is designed for use on hard floors.

The brush bar on your machine can damage

certain flooring. Some rug materials may fuzz

if a rotating brush bar is used when vacuuming.

If this happens, we recommend vacuuming

without the motorised floor tool and consulting

with your flooring manufacturer.

The LCD screen

To change the language on your

screen, press the button and hold

until the language list appears.

Release the button.

Tap the button to scroll through

the language list to your preferred

language. Press and hold the

button until the countdown ends.

A green tick will appear on the

screen to show your language

selection is complete.

To cancel your selection, release the

button during the countdown.

To get the best performance and

life from your battery, use Eco or

Med mode.

Change

language

Change alert

settings

Battery health

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50

Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English

selected

4:50 Auto

Low

run time

Exit

Off

Settings menu

Control the settings on your machine

using the button.

To enter the settings menu, press and

hold the button until the menu screen

appears. Tap to scroll through the

options available.

When the battery needs charging,

your machine will pulse three times

and a low run time icon will appear

on the screen.

When your battery is empty,

a red warning icon will appear

on the screen.

The LCD screen shows current performance,

including selected cleaning mode, remaining run

time, filter maintenance and blockage reports.

To exit the settings menu. Tap to

scroll through the selection menu.

Select ‘Exit menu’.

When the battery needs charging,

your machine will pulse three times

and a red warning icon will appear

on the screen.

The alerts you might see are:

Filter – the filter isn’t fitted correctly,

or needs cleaning.

Blockage – your machine has a

blockage that needs removing.

Exit settings menu

Alerts

Run time

countdown

You can turn the alert motor pulse

off. Your motor will no longer pulse

but alert information will continue

to be displayed on the LCD screen

when your machine needs your

attention.

Turning off Alerts will not turn off

the blockage alert pulsing. This is

to ensure you clear any blockages,

preventing damage to your

machine.

Tap to scroll through the settings

menu. Select the ‘Alerts’ option.

Scroll to select on or off. Hold the

button until the countdown ends

and a tick appears on the screen.

To cancel your selection, release the

button during the countdown.

Connect the charging cable directly to your machine

or into the dock.

The blue LEDs on either side of the battery will flash

as your machine charges and the LCD screen will show

a full battery icon when fully charged and ready to use.

Your machine won’t operate or charge if the ambient

temperature is below 5°C (41°F). This is designed to

protect both the motor and battery.

You can help prolong the battery life by leaving your

machine to cool down before recharging.

Removing the battery

Hold your hand under the battery

to support it.

Press the red battery release button

and slide the battery off the handle.

Charge the battery.

Re-fitting the battery

Slide the battery onto the handle

until it clicks securely in place.

If you have additional click-in batteries, we

recommend that you alternate the batteries to

maintain even performance.

clik

For the best experience, we recommend fully

charging your machine, and any additional

batteries, as soon as you open the box and

after every clean. This is because the battery

and monitoring system’s algorithm ‘learns’ over

time, and fully charging your batteries helps

it to more accurately calculate and display

remaining run time.

Charging your machine Changing your click-in battery

3.5hrs

1 3

Emptying your bin

Hold your vacuum over a bin.

Push the red bin release button, taking care not

to pull the trigger. The bottom of the bin will open

and the shroud will slide down inside the bin,

wiping away any dirt.

If the bin doesn’t open, check the bin release

button is pushed down fully.

Press the red wand release button

and pull the wand away from the bin.

Don’t pull the trigger when emptying the bin.

To close the bin, push the bin base upwards until

the bin and lid both click into place. Reconnect the

wand.

To reduce contact with dust/allergens, put your

bin in a dust-proof bag when emptying it. Remove

the clear bin carefully and seal the bag tightly.

Reconnect the wand.

Empty your bin as soon as the

dirt reaches the Max mark.

You may need to clean the

filter more often if you use

your machine with a full bin.

Don’t put any part of your machine in a

dishwasher or use detergents, polishes

or air fresheners.

Empty your bin before cleaning it.

Press the red button on the bin runner to release

the bin, then slide the bin off the runner.

Rinse your bin under a cold tap. Wipe with a dry

lint-free cloth to remove any debris.

Make sure that all parts of your bin

are completely dry before refitting it.

Slide the bin onto the runner.

Push the bin base upwards until your

bin clicks into place and the bin base

is securely closed.

clik

Washing your bin

Washing your filter

To refit your filter, position it on the

main body of your machine and turn

it clockwise until it clicks securely into

place.

Your filter may need washing more

often if you vacuum fine dust or use

Boost mode frequently.

Before washing your filter, tap it

gently over a bin to remove any

excess dust and debris.

Wash your filter with cold tap water.

Wash the outside of the filter,

rubbing with your fingers to remove

the dirt.

Place your hand over one end of

the filter, fill the filter with water and

place your other hand over the open

end. Shake to wash the inside of the

filter.

Repeat these steps until the water

runs clear.

Wash your filter at least once a month or

when the filter icon is displayed on the screen.

Don’t put any part of your machine

in a dishwasher or use detergents,

polishes or air fresheners.

Turn your filter anti-clockwise and

pull it away from your machine.

Shake your filter to remove any

excess water and place it with the

foam end facing upwards.

Leave your filter for at least 24 hours

to dry completely and make sure it is

completely dry before refitting.

1 3 4

1 2 3

Washing your brush bar

To maintain optimum performance, check and

wash your brush bar regularly.

Make sure your machine is disconnected from the

charger and take care not to touch the trigger.

1 3

Don’t put any part of your machine in a

dishwasher or use detergents, polishes

or air fresheners.

Press the cleaner head release button on

the end of the wand. Place the cleaner head

upside down.

Push the end cap up fully and pull the brush

bar out of the cleaner head.

Twist the end cap and remove it from the

brush bar. Don’t wash the end cap.

Reattach the end cap to the brush bar

so that it’s in the open position.

Slide the brush bar back onto the cleaner head.

Push the end cap until it clips securely back

into the closed position.

Hold your brush bar under cold tap water and

gently rub to remove any lint or dirt.

Stand the brush bar upright and leave for at least

24 hours to dry completely. Make sure your brush

bar is completely dry before refitting.

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2

3 4 5

1 2

3 4

56 7 8

clik

1 2 3

Washing your

powered tools

Washing your

non-powered tools

Soft

dusting

brush

Crevice

tool

Combination

tool

Extension

hose

Flexi

crevice

tool

Mattress

tool

Up-top

tool

Stubborn

dirt brush

Light pipe

crevice tool

Don’t put any part of your machine in a dishwasher

or use detergents, polishes or air fresheners.

Wash with cold tap water, taking care not to get water

on the connector end.

Make sure the tool is completely dry before using.

Your mini-motorised tool is not washable.

Wipe over with a damp lint-free cloth.

Don’t put any part of your machine in a dishwasher

or use detergents, polishes or air fresheners.

Wash with cold tap water.

Make sure the tool is completely dry before using.

Low-reach

adaptor

Clearing blockages

If your machine detects a blockage, the motor will

pulse seven times and a blockage icon will light

up on the screen. You won’t be able to use your

machine until the blockage has been cleared.

If you try to use your machine when the motor

is pulsing, it will automatically cut out.

1 3

Remove the bin and check for blockages

in the main body of your machine.

Make sure any blockages are

completely cleared and all parts are

fitted before using your machine.

clik

Be careful of sharp objects that may

be blocking your machine.

Check for blockages in the cleaner head,

and, if needed, follow the instructions for

removing the brush bar.

Andere Handbücher für Slim

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson Slim Bedienungsanleitung

Dyson

Dyson DC33 Bedienungsanleitung

Dyson

Dyson Ball Animal Bedienungsanleitung

Dyson

Dyson DC37 Bedienungsanleitung

Dyson

Dyson DC32 Bedienungsanleitung

Dyson

Dyson DC 31 Bedienungsanleitung

Dyson

Dyson DC26 Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson V8 Absolute Bedienungsanleitung

Dyson

Dyson DC28 Bedienungsanleitung

Dyson

Dyson dc77 Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC24 Blueprint Limited Edition Bedienungsanleitung

Dyson

Dyson DC16 animalpro Bedienungsanleitung

Dyson

Dyson DC 51 Bedienungsanleitung

Dyson

Dyson DC 41 Animal Complete Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson DC 22 Bedienungsanleitung

Dyson

Dyson V6 Absolute Bedienungsanleitung

Dyson

Dyson Dc45 Bedienungsanleitung

Dyson

Dyson DC18 All Floors Bedienungsanleitung

Dyson

Dyson DC50 Ball Compact Bedienungsanleitung

Dyson

Dyson DC 62 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung