Dyson V11 Bedienungsanleitung

User manual

SV18 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

In thebox

Assembling your machine

Getting started

Caring for your floors

The LCD screen

Charging your machine

Changing your click-in battery

Emptying your bin

Cleaning your bin

Washing your filter

Washing your High Torque XL cleaner head

Washing your Soft roller cleaner head

Washing your tools

Using your High Torque XL cleaner head

Looking for blockages

WIP // 27.02.20

Single option

In the box

Vacuum cleaner main body

Some tools may not be included.

You can buy additional tools at Dyson.com

Wand

Combination tool

Two tools in one – brush

and wide nozzle. For simple

switching between tasks.

Mini motorized tool

The motorized brush bar

tackles hair and ground-in

dirt in tight spaces, like your

stairs or car.

Wand clip

Crevice tool

Designed for precise

cleaning around edges

and narrow gaps.

Charger

Charges your

vacuum with or

without the dock.

DockExtra-wide High Torque XL

cleaner head

12-inch wide High Torque XL

cleaner head with Dyson DLS™

(Dynamic Load Sensor) system.

Covers more floor with each

sweep, for faster room cleaning.

Soft roller cleaner head

Engineered with soft woven

nylon and anti-static carbon

fibre, for hard floors.

Auto

Boost

Eco

Auto Med

100%

English

Ελληνικ

Espanol

Čeština

中文

한국어

English EnglishEnglish

Eco

Auto

Boost

Eco Auto Med

100%

English

Ελληνικ

Espanol

Čeština

中文

한국어

English EnglishEnglish

Eco

Intensive cleaning for

ground-in dirt.

Maximum run time

for longer cleans all

around your home.

Power modes

Your machine has three power

modes for different tasks.

Change power modes quickly

using a single button.

Assembling your machine

Getting started

The optimum balance of power and run time.

Attach your High Torque XL cleaner head to activate

Auto mode. Dyson DLS™ technology automatically

changes motor speed between floor types.

Caring for your

floors

Check that the underside of the cleaner head

or tool is clean and free from any objects that

may cause damage.

Before vacuuming your flooring, rugs,

and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your machine can damage

certain carpet types and floors. Some carpets

will fuzz if a rotating brush bar is used when

vacuuming. If this happens, we recommend

vacuuming without the motorised floor tool and

consulting with your flooring manufacturer.

You can register your machine using the serial

number found on the bottom of your machine.

Fully charge your machine

before using for the first time.

clik clik

clik

Boost

Eco

Auto

Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto

Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

To exit the settings menu. Tap to

scroll through the selection menu.

Select ‘Exit menu’.

When the battery needs charging,

your machine will pulse three times

and a red warning icon will appear

on the screen.

The alerts you might see are:

Filter – the filter isn’t fitted correctly,

or needs cleaning.

Blockage – your machine has a

blockage that needs removing.

Exit settings menu

Alerts

The LCD screen

To change the language on your

screen, press the button and hold

until the language list appears.

Release the button.

Tap the button to scroll through

the language list to your preferred

language. Press and hold the

button until the countdown ends.

A green tick will appear on the

screen to show your language

selection is complete.

To cancel your selection, release the

button during the countdown.

To get the best performance and

life from your battery, use Eco or

Med mode.

Change

language

Run time

countdown

Change alert

settings

Battery health

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50

Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English English

selected

4:50 Auto

Low

run time

Exit

Off

Boost

Eco Auto Med

100%

English

Espanol

English

selected

4:50 Auto

Low

run time

Exit

Off

Settings menu

Control the settings on your machine using the button.

To enter the settings menu, press and hold the button

until the menu screen appears. Tap to scroll through

the options available.

When the battery needs charging,

your machine will pulse three times

and a low run time icon will appear

on the screen.

When your battery is empty,

a red warning icon will appear

on the screen.

You can turn the alert motor pulse

off. Your motor will no longer pulse

but alert information will continue

to be displayed on the LCD screen

when your machine needs your

attention.

Turning off Alerts will not turn off

the blockage alert pulsing. This is

to ensure you clear any blockages,

preventing damage to your

machine.

Tap to scroll through the settings

menu. Select the ‘Alerts’ option.

Scroll to select on or off. Hold the

button until the countdown ends

and a tick appears on the screen.

To cancel your selection, release the

button during the countdown.

It’s important to fully charge your new machine

before using it for the first time, and after

every clean. This is because the battery and

monitoring system’s algorithm ‘learns’ over

time, and fully charging your machine helps

it to more accurately calculate and display

remaining run time.

4.5hrs

Charging your machine

Connect to charger either directly or in the dock.

The blue LEDs on either side of the battery will flash during charging.

When the battery is fully charged, both LEDs will light for 5 seconds.

Your battery is fully charged when the display shows 100%.

Your machine won’t operate if the ambient temperature is below

10°C (50°F). This is designed to protect both the motor and battery.

Changing your click-in battery

To remove a battery

Hold your hand under the battery

to support it.

Press the red battery release button

and slide the battery off the handle.

Place the battery on charge.

To install a battery

Slide the battery onto the handle

until it clicks securely in place.

Where you have additional batteries,

we recommend that you alternate the

batteries to maintain even performance.

clik

1 3

Emptying your bin

To release the dirt:

Hold the machine over the bin in a downwards

position.

Firmly push the red bin release button. The bin will

slide down, cleaning the shroud as it goes and the

bin base will open.

The bin base won’t open if the red bin release

button isn’t pushed down all the way.

Press the red wand release button

and pull the wand away from the bin.

To minimise dust/allergen contact when emptying,

cover the clear bin tightly in a dust proof bag while

you empty. Remove the clear bin carefully from the

bag. Seal the bag tightly and dispose.

Be careful not to pull the power trigger

while the clear bin is open for emptying.

To close the clear bin:

Push the bin base upwards until the clear bin

and bin base click into place.

Empty as soon as the dirt reaches

the MAX level – don’t overfill.

Using the machine when the dirt

is above the MAX line may cause

the dirt to reach the filter and

more frequent maintenance

will be required.

Be careful not to pull the power

trigger while the clear bin is open

for emptying.

Cleaning your bin

If it is necessary to clean your bin, empty the bin as

shown in the ‘Emptying your bin’ section.

Press the red button located on the bin runner to

release the bin and slide the bin off the runner.

Clean the bin with a damp cloth only.

Make sure that the bin and seals are completely

dry before replacing.

To refit the bin, insert the spine on to the

bin runner.

Close the bin by pushing the bin base upwards

until the bin and bin base click into place.

The bin isn’t dishwasher safe and the use of

detergents, polishes or air fresheners to clean the

bin isn’t recommended as this may damage your

machine.

clik

Washing your filter

Check that the filter unit is

completely dry.

To refit, position the filter unit in

place on the main body and twist

clockwise until it clicks into place.

The filter unit may require more

frequent washing if vacuuming fine

dust or if used mostly in Boost mode.

Don’t put any part of your machine

in a dishwasher, washing machine,

tumble dryer, oven, microwave or

near a naked flame.

Wash the filter unit in cold

water only.

Wash the pleated paper element

of the filter unit first; hold the filter

unit under a cold water tap with

the foam element downwards

and run cold water over the

pleated paper.

To always get the best performance from your

machine, it is important to regularly clean the filters

and check for blockages.

The LCD display will alert you when the filter unit

needs washing. We recommend that you wash your

filter at least once a month or when your machine

alerts you.

Remove the filter unit by twisting it

anti-clockwise. Gently pull it away

from the machine.

Tap the filter unit gently, to remove

any excess dust and debris before

washing it.

Wash the foam element of the filter

unit next; hold the filter unit under

a cold water tap with the foam

element downwards so that dirty

water does not contaminate the

pleated paper element. Run cold

water over the inside and outside of

the foam element and squeeze the

foam gently to expel the dirt.

Repeat washing both parts of the

filter unit until the water runs clear.

Gently shake the filter unit to

remove any excess water and leave

to drain with the foam element end

facing up.

Leave the filter unit to dry

completely in a dry environment

with good airflow, for a minimum

of 24 hours.

1 3 4

Washing your High Torque XL cleaner head

Don’t put your brush bar in a dishwasher,

washing machine, tumble dryer, oven,

microwave or near a naked flame.

Only use cold water to wash your brush bar

and don’t use any detergents.

Lift the red catch on the cleaner head to

release the brush bar.

Slide the brush bar out of the cleaner head.

Twist the end cap and remove it from the

brush bar. Don’t wash the end cap.

Hold your brush bar under cold tap water and

gently rub to remove any lint or dirt.

Stand the brush bar upright and leave to

dry completely. Make sure your brush bar is

completely dry before refitting.

The cleaner head housing is not washable and

should only be wiped over with a damp lint-free

cloth.

1 3

To maintain optimum performance, check and wash your

brush bar regularly.

Make sure your machine is disconnected from the charger

and take care not to touch the trigger.

5 6

7 8

2 3

click

Washing your Soft roller cleaner head

Washing your tools

Don’t put any part of your machine in a dishwasher

or use detergents, polishes or air fresheners.

Wash with cold tap water.

Make sure your tool is completely dry before using.

Your mini-motorised tool is not washable.

Wipe over with a damp lint-free cloth.

Combination tool

Crevice tool

Using your High Torque XL

cleaner head

Your High Torque XL cleaner head has a slider

control to adjust the suction of the cleaner head.

To select the suction required, move the suction

control slider on top of the cleaner head.

Maximum suction for ground in dust and debris

For vacuuming durable floor coverings, hard floors and heavily

soiled carpets and rugs.



Suction for dust and debris

For vacuuming lightly-soiled carpets, rugs and hard flooring.

For vacuuming large debris such as peanuts or rice.

–

Suction for deep pile carpets and delicate flooring

For vacuuming deep pile carpets or rugs and flooring where

you experience greater resistance.

For vacuuming lightly soiled floors, and delicate flooring such

as vinyl, parquet and lino.

Andere Handbücher für V11

Inhaltsverzeichnis

Andere Dyson Staubsauger Handbücher

Dyson

Dyson 4008367 Bedienungsanleitung

Dyson

Dyson DC40 Bedienungsanleitung

Dyson

Dyson Ball DC25 Bedienungsanleitung

Dyson

Dyson DC34 ANIMAL Bedienungsanleitung

Dyson

Dyson DC34 ANIMAL Bedienungsanleitung

Dyson

Dyson V6 mattress Bedienungsanleitung

Dyson

Dyson DC17 Absolute Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson DC30 Bedienungsanleitung

Dyson

Dyson Cyclone V10 Total Clean Bedienungsanleitung

Dyson

Dyson DC58 ANIMAL Bedienungsanleitung

Dyson

Dyson DC23 Turbinehead Bedienungsanleitung

Dyson

Dyson DC19 Bedienungsanleitung

Dyson

Dyson DC 16 Bedienungsanleitung

Dyson

Dyson DC 22 Bedienungsanleitung

Dyson

Dyson DC16 motorhead Bedienungsanleitung

Dyson

Dyson DC50 Ball Compact Bedienungsanleitung

Dyson

Dyson V11 Bedienungsanleitung

Dyson

Dyson DC 59 Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson Ball Bedienungsanleitung

Dyson

Dyson DC34 ANIMAL Bedienungsanleitung

Dyson

Dyson DC20 Bedienungsanleitung

Dyson

Dyson DC 35 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung