ETX SERIES LITHIUM BATTERIES
Environmental Rating (with case)
IP 52(dust and dripping water)
Ensure positive cable clamp and battery terminal does not touch any metal part of the
vehicle
If the Jump Pack gets hot while charging, stop charging and discontinue use
Never expose the Jump Pack to fire or temperatures above 158 F (70 C)
Never disassemble the unit
Never allow the Jump Pack power pack to get wet
FAQs
Despite the simplicity of operation, you may encounter situations where the Jump Pack does
not operate as expected. Here are some potential issues you may encounter with the
appropriate troubleshooting procedures.
Q.
How to turn on the USB port?
A.
The Jump Pack needs to be “turned on” for the USB port to operate. To turn on the Jump
Pack press the power on button for one second and verify the charge level indicator lights
are lit. The Jump Pack (USB port) will shut-off automatically after a few minutes of no use.
Q.
How many times can the Jump Pack charge my phone before needing to recharge the Jump
Pack (i.e. iPhone 5)?
A.
5-8 times
Q.
How many times can the Jump Pack, jump start, a vehicle before needing to be recharged?
A.
This depends on many factors like the vehicle’s battery condition, the vehicles’ required
cranking amps, and the size of the vehicle battery. For motorsports vehicles it could be
more than 20 times, whereas a car with a drained 100Ah battery maybe only 5 times.
