Eaton IQ 100 series Leitfaden

IQ 100 Series (130/140/150)

Meter User & Installation Manual

IM02601003E

Rev D

Specications contained herein are subject

to change without notice.

Power Xpert and PowerVision are registered

trademarks of Eaton

Corporation.

EATON CORPORATION - CONFIDENTIAL

AND PROPRIETARY NOTICE TO PERSONS

RECEIVING THIS DOCUMENT AND/OR

TECHNICAL INFORMATION.

THIS DOCUMENT, INCLUDING THE DRAW-

ING AND INFORMATION CONTAINED

THEREON, IS CONFIDENTIAL AND IS THE

EXCLUSIVE PROPERTY OF EATON CORPO-

RATION, AND IS MERELY ON LOAN AND

SUBJECT TO RECALL BY EATON AT ANY

TIME. BY TAKING POSSESSION OF THIS

DOCUMENT, THE RECIPIENT ACKNOWL-

EDGES AND AGREES THAT THIS DOCU-

MENT CANNOT BE USED IN ANY MANNER

ADVERSE TO THE INTERESTS OF EATON,

AND THAT NO PORTION OF THIS DOCU-

MENT MAY BE COPIED OR OTHERWISE

REPRODUCED WITHOUT THE PRIOR WRIT-

TEN CONSENT OF EATON. IN THE CASE

OF CONFLICTING CONTRACTUAL PROVI-

SIONS, THIS NOTICE SHALL GOVERN THE

STATUS OF THIS DOCUMENT.

IQ 100 Series ((130/140/150) Meter

Table of Contents

User and Installation Manual IM02601003E - July 2010 www.eaton.com 3

Table of Contents

Disclaimer of Warranties and Limitation of Liability 7

Support Services 9

Website 9

EatonCare Customer Support Center 9

Technical Resource Center 10

European PanelMate Support Center 10

For Customers in Europe, contact: 10

Repair and Upgrade Service 10

Additional support is also available from our well-equipped 10

Repair and Upgrade Service (support for OI) 10

IQ 100 Series Meter Overview and Specications 11

Hardware Overview 11

IQ 100 Series Meter / Digital Transducer 11

IQ 100 Series Digital Transducer 11

Voltage and Current Inputs 11

Universal Voltage Inputs 11

Current Inputs 12

Ordering Information 12

Measured Values 13

Utility Peak Demand (IQ140/150) 14

Specications 14

Compliance 16

Accuracy 16

IQ 100 Series Mechanical Installation 17

Introduction 17

ANSI Installation Steps 18

DIN Installation Steps 19

IQ 100 Series Transducer Installation 20

IQ 100 Series Electrical Installation 21

Considerations When Installing Meters 21

CT Leads Terminated to Meter 22

CT Leads Pass-Through (No Meter Termination) 23

Quick Connect Crimp CT Terminations 24

Voltage and Power Supply Connections 25

Ground Connections 25

Voltage Fuses 25

Electrical Connection Diagrams 26

1. Service: WYE, 4-Wire with No PTs, 3 CTs 26

2. Service: 2.5 Element WYE, 4-Wire with No PTs, 3 CTs 27

3. Service: WYE, 4-Wire with 3 PTs, 3 CTs 28

4. Service: 2.5 Element WYE, 4-Wire with 2 PTs, 3 CTs 29

IQ 100 Series (130/140/150) Meter

Table of Contents

4 User and Installation Manual IM02601003E-July 2010 www.eaton.com

5. Service: Delta, 3-Wire with No PTs, 2 CTs 30

6. Service: Delta, 3-Wire with 2 PTs, 2 CTs 31

7. Service: Delta, 3-Wire with 2 PTs, 3 CTs 32

8. Service: Current Only Measurement (Three Phase) 33

9. Service: Current Only Measurement (Dual Phase) 34

10. Service: Current Only Measurement (Single Phase) 35

IQ 100 Series Communication Installation 37

RS485 / KYZ Output (Communication Option) 37

For All RS485 Connections: 38

IQ 100 Series Transducer Communication Information 40

Meter Connection 40

Programming the IQ 100 Series Meter Using the Front Panel 41

Introduction 41

Understanding Meter Face Elements 41

Understanding Meter Face Buttons 41

Using the Front Panel 42

Understanding Startup and Default Displays 42

Using the Main Menu 43

Using Reset Mode 43

Entering a Password 44

Using Conguration Mode 45

Conguring the Scroll Feature 46

Conguring CT Setting 47

Conguring PT Setting 48

Conguring Connection Setting 49

Conguring Communication Port Setting 49

Using Operating Mode 50

Understanding the % of Load Bar 51

% of Load Segment Table 51

Performing Watt-Hour Accuracy Testing (Verication) 52

Programming the IQ 100 Series Meter Using Software 53

Overview 53

Connecting to the IQ 100 Series Meter/Transducer 53

Accessing the IQ 100 Series Device Prole 54

Performing Device Prole Tasks 55

Conguring Settings 56

Conguring Scaling 56

Functional Overview of CT and PT Ratios: 56

Conguring Energy and Display Settings 57

Conguring Communication Settings 58

Conguring (System) Settings 58

Polling the IQ 100 Series Meter 59

Instantaneous Polling 59

Poll Power and Demand 60

Poll Phasors 61

IQ 100 Series ((130/140/150) Meter

Table of Contents

User and Installation Manual IM02601003E - July 2010 www.eaton.com 5

Using the IQ 100 Series Tools Menu 62

Accessing the Device Prole Screen 62

Reset Device Information 62

Retrieve Device Status 62

Flash Update Firmware 62

Performing Additional Tasks with Eaton Meter Conguration Software 63

Using Connection Manager 63

Disconnecting from an IQ 100 Series meter 65

Changing the Primary Device/Address 65

Merging Connection Databases 65

Using the Options Screen 66

Using the Help Menu 66

App. A: IQ 100 Series Navigation Maps 67

Introduction 67

Navigation Maps (Sheets 1 to 4) 67

Main Menu Screens (Sheet 1) 68

Operating Mode Screens (Sheet 2) 69

Reset Mode Screens (Sheet 3) 70

Conguration Mode Screens (Sheet 4) 71

App.B Modbus Mapping for IQ 100 Series 73

Introduction 73

Modbus Register Map Sections 73

Floating Point Values 74

Important Note Concerning the IQ 100 Series Modbus Map 75

Modbus Register Map (MM-1 to MM-16) 75

IQ 100 Series (130/140/150) Meter

Table of Contents

6 User and Installation Manual IM02601003E-July 2010 www.eaton.com

IQ 100 Series ((130/140/150) Meter

Disclaimer of Warranties and Limitation of Liability

User and Installation Manual IM02601003E - July 2010 www.eaton.com 7

Disclaimer of Warranties and Limitation of Liability

The information, recommendations, descriptions and safety notations in this document are based on

Eaton Corporation’s (“Eaton”) experience and judgment and may not cover all contingencies. If further

information is required, an Eaton sales ofce should be consulted. Sale of the product shown in this

literature is subject to the terms and conditions outlined in appropriate Eaton selling policies or other

contractual agreement between Eaton and the purchaser. THERE ARE NO UNDERSTANDINGS,

AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A

PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY

EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGA-

TION OF EATON. THE CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY

ANY CONTRACT BETWEEN THE PARTIES.

In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence),

strict liability or otherwise for any special, indirect, incidental or consequential damage or loss

whatsoever, including but not limited to damage or loss of use of equipment, plant or power system,

cost of capital, loss of power,additional expenses in the use of existing power facilities, or claims

against the purchaser or user by its customers resulting from the use of the information, recommenda-

tions and descriptions contained herein.

IQ 100 Series (130/140/150) Meter

Disclaimer of Warranties and Limitation of Liability

8 User and Installation Manual IM02601003E-July 2010 www.eaton.com

IQ 100 Series ((130/140/150) Meter

Support Services

User and Installation Manual IM02601003E - July 2010 www.eaton.com 9

Support Services

The goal of Eaton is to ensure your greatest possible satisfaction

with the operation of our products. We are dedicated to

providing fast, friendly and accurate assistance. That is why we

offer you so many ways to get the support you need. Whether

it’s by phone, fax or e-mail, you can access Eaton’s support

information 24 hours a day, seven days a week. Our wide range

of services is listed below.

You should contact your local distributor for product pricing,

availability, ordering, expediting and repairs.

Website

Use the Eaton website to nd product information. You can also

nd information on local distributors or Eaton’s sales ofces.

Website Address

www.eaton.com/electrical

EatonCare Customer Support Center

Call the EatonCare Support Center if you need assistance with

placing an order, stock availability or proof of shipment,

expediting an existing order, emergency shipments, product

price information, returns other than warranty returns, and

information on local distributors or sales ofces.

Voice: 877-ETN CARE (386-2273) (8:00 am – 6:00 pm EST)

FAX: 800-752-8602

After-Hours Emergency: 800-543-7038

(6:00 pm – 8:00 am EST)

If you are in the US or Canada, and have OI or PLC questions,

you can take advantage of our toll-free line for technical

assistance with hardware and software product selection,

system design and installation, and system debugging and

diagnostics. Technical support engineers are available for calls

during regular buiness hours.

IQ 100 Series (130/140/150) Meter

Support Services

10 User and Installation Manual IM02601003E-July 2010 www.eaton.com

Technical Resource Center

Voice: 877-ETN CARE (386-2273) (8:00 am – 5:00 pm EST)

FAX: (828) 651-0549

e-mail: [email protected]

European PanelMate Support Center

This engineering company, located in Zurich, Switzerland,

provides high-level quality support and repair assistance for your

PanelMate products. You will receive technical and application

support.

For Customers in Europe, contact:

BFA Solutions, Ltd.

Voice: +41 1 806 64 44 (9:00 am – 5:00 pm CET)

e-mail: [email protected]

www.bfa.ch

Repair and Upgrade Service

Additional support is also available from our well-equipped

Repair and Upgrade Service department. If you have questions

regarding the repair or upgrade of OI product, contact your local

distributor.

Repair and Upgrade Service (support for OI)

Voice:

877-ETN-CARE (877-386-2273) (8:00 am – 5:00 pm EST)

414-449-7100 (8:00 am – 5:00 pm EST)

FAX: 614-882-3414

e-mail: [email protected]

Andere Handbücher für IQ 100 series

Inhaltsverzeichnis

Andere Eaton Messgerät Handbücher

Eaton

Eaton MEMSHIELD3 Handbuch

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton EMC3P-P2C1 Bedienungsanleitung

Eaton

Eaton Power Xpert Meter 2000 Bedienungsanleitung

Eaton

Eaton KK650 Bedienungsanleitung

Eaton

Eaton PDI WaveStar Infinity 2 Bedienungsanleitung

Eaton

Eaton E5024E0432 Bedienungsanleitung

Eaton

Eaton 2075 Bedienungsanleitung

Eaton

Eaton InsulGard Bedienungsanleitung

Eaton

Eaton LifeSense Bedienungsanleitung

Eaton

Eaton PXM4K Series Bedienungsanleitung

Eaton

Eaton Cutler-Hammer IQ 300 Series Programmierhandbuch

Eaton

Eaton EMV600 Bedienungsanleitung

Eaton

Eaton 5775X-42X Bedienungsanleitung

Eaton

Eaton Crouse-Hinds Z130 Bedienungsanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton xComfort CSEZ-01/06 Handbuch

Eaton

Eaton 2075 Bedienungsanleitung

Eaton

Eaton SEFELEC 1500M Bedienungsanleitung

Eaton

Eaton GIM 60 Bedienungsanleitung

Eaton

Eaton IQ 250 Leitfaden

Eaton

Eaton Network Card-MS Programmierhandbuch

Eaton

Eaton SONiX Pm10 Bedienungsanleitung

Eaton

Eaton Crouse-Hinds MTL Z230 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung