Eaton Powerware 9125 Bedienungsanleitung

9125

INSTALLATION INSTRUCTIONS

Seismic Kit

For use with Two-in-One

2500–3000 VA Models

www.powerware.com

Powerware is a registered trademark of Powerware Corporation.

may be reproduced in any way without the express written approval of Powerware Corporation.

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Powerware 9125 (2500–3000 VA) Seismic Kit

The PowerwareR9125 (2500–3000 VA) seismic kit is available in two

models: a four-unit model and a six-unit model. The four-unit model can

secure up to four UPS, battery, or PowerPassRDistribution Module (PDM)

cabinets; the six-unit model holds up to six cabinets. Both models include

spacers for any extra openings.

Four-Unit Model

(Shown with Spacer)

Six-Unit Model

(Shown with Spacer)

Figure 1. Seismic Kits

The seismic kit includes:

쑺1 seismic base with casters

쑺1 front strap

쑺1 back strap with tabs

쑺4 seismic base angles

쑺4spacers

쑺8M6´16 hex bolts

쑺8M6lockwashers

쑺24 M4 ´8 Phillips hex-head screws with lockwashers

쑺6M4´10 Phillips hex-head screws with lockwashers

Powerware 9125 (2500–3000 VA) Seismic Kit

4Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

The following steps explain how to install the seismic kit.

1. If you are bolting the cabinet to the floor, use the following drill

patterns to prepare the floor mounting holes.

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

48.00 cm

(18.90 in)

43.00 cm

(16.93 in)

Ø1.43 cm

(0.56 in)

Figure 2. Drill Pattern for the Four-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

60.40 cm

(23.78 in)

65.41 cm

(25.75 in)

Ø1.43 cm

(0.56 in)

Figure 3. Drill Pattern for the Six-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

6Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

2. Attach the front and back straps to the base using the supplied

M6 ´16 hex bolts and lockwashers (see Figure 4). Verify the

straps align with the front and back edges of the base.

NOTE For floor mounting, also attach the seismic base angles with the

front and back straps as shown in Figure 5.

NOTE The base casters are removeable. To mount the seismic kit flush

with the floor, remove the casters and secure the base angles using the

inside screw position.

Figure 4. Attaching the Straps

Figure 5. Seismic Base Angles for Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

3. On the back of each cabinet, remove the screw on the top left

corner and discard (see Figure 6).

Figure 6. Removing Cabinet Screws

4. Beginning with a middle position, slide each cabinet into place.

NOTE The PDM must be installed to the left of the UPS and the EBM(s)

must be installed to the right of the UPS.

Figure 7. Sliding in a Cabinet

Powerware 9125 (2500–3000 VA) Seismic Kit

8Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

5. Attach the cabinet to the tab on the back strap by installing one

of the supplied M4 ´10 Phillips hex-head screws (see Figure 8).

Figure 8. Securing the Cabinet to the Back Strap

6. Fasten the top of the cabinet to the front strap with two of the

supplied M4 ´8 Phillips hex-head screws.

Figure 9. Securing the Front Strap

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

7. Install the remaining cabinets, leaving any empty slots to the

outside position(s).

If there is an empty slot, install spacers to complete the seismic

kit. Attach the spacer to the front and back straps using the

supplied M4 ´8 Phillips hex-head screws.

Figure 10. Installing Spacers

8. Roll the loaded cabinet to its permanent location.

If you installed seismic base angles, secure the base to the floor

with earthquake bolts (not provided).

Figure 11. Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

10 Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Andere Handbücher für Powerware 9125

Andere Eaton UPS Handbücher

Eaton

Eaton 9SX 15KPM Serie Bedienungsanleitung

Eaton

Eaton Powerware 9155 Bedienungsanleitung

Eaton

Eaton 93E UPS Bedienungsanleitung

Eaton

Eaton Powerware 5125 Bedienungsanleitung

Eaton

Eaton 9E Bedienungsanleitung

Eaton

Eaton 5P 1500 RT Bedienungsanleitung

Eaton

Eaton Power Xpert 9395P Handbuch

Eaton

Eaton Powerware 9125 Bedienungsanleitung

Eaton

Eaton 5P 1550VA Bedienungsanleitung

Eaton

Eaton 9PX2000RT-L Montageanleitung

Eaton

Eaton Powerware 5125 Bedienungsanleitung

Eaton

Eaton Powerware BladeUPS Kurzanleitung

Eaton

Eaton Ellipse PRO 850 Bedienungsanleitung

Eaton

Eaton 5P 650 AU Bedienungsanleitung

Eaton

Eaton Aegis AGPHxxxxx series Bedienungsanleitung

Eaton

Eaton 550VA 3S Bedienungsanleitung

Eaton

Eaton Ellipse MAX 600 Bedienungsanleitung

Eaton

Eaton 550 Bedienungsanleitung

Eaton

Eaton Powerware BladeUPS Bedienungsanleitung

Eaton

Eaton 9E20K-TH Bedienungsanleitung

Eaton

Eaton Powerware 9395 Bedienungsanleitung

Eaton

Eaton 9EEBM240 Bedienungsanleitung

Eaton

Eaton Powerware 5110 Bedienungsanleitung

Eaton

Eaton Powerware 9135 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung