EcoxGear MARINE FX Bedienungsanleitung

Quick Start

Open Caps on the

bottom of both of

your speakers

Turn on the Main

Power Switches

on both speakers

Press the Standby Power Button on top

of your speakers to power them on

The speakers will automatically pair to

each other and announce which speaker

is the Left / Right speaker.

Search your Bluetooth Connection on

your Smart Device. Two ‘ECOXGEAR’

options will be available. Choose either.

Pair & Play

Control Buttons

LED Status Indicators

Power, Battery Indicator,

EcoConnect, Bluetooth

Battery Level Indicators

Control Buttons & Operations

On/Off

Press the Standby Power

Button once to power

ON/OFF.

IMPORTANT: Standby

Power function will NOT

operate when the Master

Power is set OFF. Master

Power Switch under the

cap on the bottom of each

speaker must be set ON for

Standby & your Marine FX

speakers to operate.

Bluetooth

When turned ON, the Marine

FX speakers will power

on and search for your

Bluetooth. Refer to Set Up

Recommendations 1-2-3

part for details.

EcoConnect

Functionality is only

available between two

units. The speakers will

automatically pair to each

other when turned on. Refer

to EcoConnect - Wireless

Stereo Connection of Two

Speakers for details.

Speaker Volume

Press to decrease or

to increase Speaker Volume.

NOTE: Some Bluetooth

devices may require to be

manually set for maximum

audio level.

Your Marine FX speakers

will beep to indicate when

maximum volume setting

is reached.

Track Selection

Press button once to select

Previous Song track &

Next Song track .

Play/Pause/Answer

Press button once to pause

& play song tracks and to

answer mobile calls (MUST

be paired with Bluetooth).

Battery Indicator

Connect USB to power

source. LED on the top panel

indicates USB connection

charging status.

RED: charge in process

GREEN: full charge complete

NOTE: There also are four

LED Battery Level Indicators

located on the top of the unit.

Each LED represents 25%

of a charge. Four full LEDs

indicate a full charge. While

charging, the LEDs will flash

in succession.

Charge Your Marine FX speakers

Before you power on your Marine FX speakers,

connect the USB-C port to the USB cable and a 5V

power source to fully charge your Marine FX speakers

for best performance.

NOTE: Before using your Marine FX speakers for the first

time, charge the unit until all battery level indicators are

green, indicating a full charge.

Approximately 6 hours of charging is required from a low

to a full charge.

Power source options include the USB connection to

your computer or a power outlet using a 5V, 2A USB to

AC power adapter. It is recommended to always use the

USB cable and power adapter included with your Marine

FX speakers.

Power On, Battery, & LED Status Indicators

Once fully charged, press the Standby Power Button

on the top of your Marine FX speakers. You will see

the green LED light & you will hear, “Speaker on” when

powering on.

IMPORTANT: Make sure that the Main Power Switch,

located in the back compartment under the cap, is set in

the ON position. If the switch is in the OFF position, your

Marine FX speakers will not be able to turn on using the

Standby Power Button.

The LED battery level indicators are located on the top of

the unit. Each bar represents 25% of a charge, with 4 full

LEDs indicating a full charge.

Audio playback time over Bluetooth connection is

approximately 10 hours at 75% volume.

Set Up Recommendations 1-2-3

Bluetooth Pairing & Your Audio

Connecting With Bluetooth:

Connect To Your Smart Device & Play Audio

When your speakers are turned on, the blue LED light

on the top panel will flash, indicating that they are ready

to pair.

Turn on Bluetooth on your Bluetooth device (Smart

Device) and set the device in pairing mode. Available

Bluetooth connections shall appear. Select the

ECOXGEAR speaker from the list of discovered devices

on your Bluetooth device. Wait for a few seconds until the

connection is completed.

NOTE: Bluetooth connection feature is found in the

Settings section of most mobile phones and other

Bluetooth enabled devices.

When the ECOXGEAR selection is made and the

Bluetooth connection is completed, your Marine FX

speakers will announce: “Connection successful.”

Once connected, select and play your desired audio.

Pairing Mode: If the LED is not flashing or if you wish to

place your Marine FX speakers in pairing mode, press

and release the Bluetooth button on the top panel. Your

Marine FX speakers shall announce “Ready to connect”

when ready to pair to a new device.

NOTE: Your Marine FX speakers shall sync & wirelessly

pair with most Bluetooth enabled devices. The unit

remembers the last device paired and will automatically

search for previous connections when the speaker is

turned on or when a device comes back into Bluetooth

range. If a connection is lost due to range, the speaker

will look to re-establish that connection. If Bluetooth is

turned off on your Smart Device, the Marine FX speakers

may not automatically look for the device.

RECOMMENDATION: If you are not familiar with Bluetooth

pairing for your Smartphone or other Smart Device, refer to

the User Guide for your Smartphone to learn how to add and

pair a new device (Marine FX speakers for instance) to your

Smartphone using Bluetooth.

Bluetooth Pairing & Connections: Once paired, should you

have an issue switching between Bluetooth connections

between devices, open the Bluetooth Section within the

device currently connected to the Marine FX speakers and

delete the Bluetooth connection. The Marine FX speakers

will then be available to pair and connect to an alternate

Bluetooth enabled Smartphone / Audio Device.

Power On Auto-Pairing: If your phone has previously been

paired with one speaker, please follow these steps for your

next use.

Turn on one Marine FX speaker. The speaker will

announce, “Ready to Connect.”

Turn on the other Marine FX speaker.

The two speakers will automatically pair to each other

and reconnect to your phone.

If the speakers do not automatically pair when they are first

turned on, PRESS & HOLD on each speaker for 5 seconds.

Once the speakers emit a tone, follow the Bluetooth Pairing

& Audio instructions to connect one Marine FX speaker to

your device. Leave this speaker powered on and connected

to your device.

Next, press the EcoConnect Button on both of your

speakers. Both speakers will announce, “EcoConnect, pairing

speakers.” Wait approximately 4 seconds for the speakers to

wirelessly connect. Both speakers will announce “Speakers

paired.” Then, one speaker will announce, “Stereo mode, left

speaker,” the other speaker will announce, “right speaker,” and

the EcoConnect light will turn solid BLUE on both speakers

once the connection is completed.

Once the two speakers are connected via EcoConnect, start

playing music from your device. Both connected speakers will

play the music from you device.

NOTE: The EcoConnect feature works when paired to

another EcoConnect capable speaker with a distance of up

to 30ft from each other. EcoConnect only works when using

Bluetooth as your audio source.

EcoConnect - Wireless Stereo

Connection of Two Speakers

Important: Maintaining Waterproofness

If the cap on the back panel is

not properly closed, the unit

is NOT watertight.

To ensure the unit is watertight

& waterproof, ALWAYS CLOSE

THE CAP PROPERLY.

Turn the cap to the RIGHT so

the cap’s tab lines up with the

locked symbol , along the

back of the unit.

To access the connections, turn the cap to the LEFT so the

cap’s tab lines up with unlocked symbol , on the back of

the unit. Use the finger tab to pull open the cap.

Access

Connections

Select

Unlocked

Master Power Switch & Connections

Use Tab

to Open Cap

Master Power Switch

Marine FX speakers have a

separate Master Power Switch

and a Standby Button. The

switch MUST be set to the ON

position to power your Marine

FX speakers. Once the switch

is set to ON, use the Standby

Button located on the top

panel to turn the unit On/Off.

NOTE: When not in use for

extended periods, turn the

Master Power off to preserve

battery life.

IMPORTANT: Standby Power

function will NOT operate

when the Master Power is set

to OFF.

Connections: Functions

Audio AUX-IN

Connect an audio device

using the 3.5mm cable

connection as an alternative

to a Bluetooth connection to

your Marine FX speakers.

NOTE: Volume level must

be controlled from the audio

device when connected to the

AUX-IN connection.

Input

Connect the USB cable to the

USB-C Input to charge

your Marine FX speakers.

RECOMMENDATION: Use the

USB cable and power adapter

included in the box.

NOTE: Charge time from low

to full charge is approximately

6 hours.

Your speakers can be charged

while playing audio.

CAUTION: Do NOT charge if

unit and/or connections are

wet or damp.

Unit Weight

39.9 ounces

Output Power

RMS 30W

S/N Ratio

88dB +/- 3dB

Power Source

14.8V, 2600mAh

Lithium Ion Battery Pack

USB Input

5V, 2A

Frequency Range

125Hz-18,000Hz

Bluetooth

Bluetooth® CSR 4.2

Up to 100 ft / 30 m

Play Time

10+ hours from full charge

at 75% volume level

Unit Dimensions

8”

5.6” 5”

Specifications

EcoConnect

TrueWireless Stereo (TWS)

Up to 30 ft / 9.1 m between

paired speakers

Charging Options

USB to 5V, 2A AC adapter

or Computer

Charging Time

Approximately 6 hours

Recommended Storage

(Battery) Temperature

59°F / 15°C

Operating Temperature

23°F to 104°F / -5°C to 40°C

Waterproof/Dustproof Rating

IP67

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EcoxGear Sprecher Handbücher

EcoxGear

EcoxGear EcoRoam 30 Bedienungsanleitung

EcoxGear

EcoxGear ECOXBT GDI-EGBT500 Bedienungsanleitung

EcoxGear

EcoxGear EcoCarbon GDI-EXCBN200...209 Bedienungsanleitung

EcoxGear

EcoxGear EcoPebble Powerbank GDI-EXPPB100 Bedienungsanleitung

EcoxGear

EcoxGear EcoPebble Lite Bedienungsanleitung

EcoxGear

EcoxGear GDI-EGST700--710 Einrichtungshandbuch

EcoxGear

EcoxGear EcoXplorer Bedienungsanleitung

EcoxGear

EcoxGear SOUNDEXTREME SEI-ETAMPBAT7700 20 Series Bedienungsanleitung

EcoxGear

EcoxGear EcoEdge GDI-EXEDGE301 Bedienungsanleitung

EcoxGear

EcoxGear EcoBoulder MAX GDI-EXBDR310 Bedienungsanleitung

EcoxGear

EcoxGear EcoBoulder MAX GDI-EXBDR Series Bedienungsanleitung

EcoxGear

EcoxGear EcoBoulder+ Bedienungsanleitung

EcoxGear

EcoxGear SEI-ETAMP7700 20 Series Bedienungsanleitung

EcoxGear

EcoxGear ECOXBT GDI-EGBT500-510 Bedienungsanleitung

EcoxGear

EcoxGear GDI-EXEJ300 Bedienungsanleitung

EcoxGear

EcoxGear GDI-EXBM901 Bedienungsanleitung

EcoxGear

EcoxGear EcoBoulder Bedienungsanleitung

EcoxGear

EcoxGear EcoJourney GDI-EXJRNY02 Bedienungsanleitung

EcoxGear

EcoxGear GDI-VXYMHFTWL01 Bedienungsanleitung

EcoxGear

EcoxGear SOUNDEXTREME SEI-ETAMPBAT7700 20 Series Bedienungsanleitung

EcoxGear

EcoxGear 2.5 Marine Bedienungsanleitung

EcoxGear

EcoxGear EcoEdge Plus GDI-EXEGPL400 Bedienungsanleitung

EcoxGear

EcoxGear Ecotrek GDI-EXTRK210 Bedienungsanleitung

EcoxGear

EcoxGear EcoBoulder GDI-EXBM900 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung