Edelbrock 5224 Bedienungsanleitung

Edelbrock Strut Tower Brace

Catalog #5224

-2001 Mustang GT (Except Cobra)

Please study these instructions carefully before installing your new Strut Tower Brace. If you have any

questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7 am –

through Friday, Pacific Standard Time.

ted tools needed for installation:

•9/16 wrench

•7/16 wrench

•5/32 allen wrench

•7/32 allen wrench

•7mm socket and ratchet

•Punch and Hammer

•Drill bits and Drill motor

DISASSEMBLY

1. Unbolt and move out of the way the small fuse block in front of the right side shock tower.

2. Unclip the fuse block in front of the left side shock tower and move out of the way.

3. Remove the windshield wiper arms by lifting them off the windshield and pulling outward on the retaining clip

4. Remove the hood weather strip seal, remove plastic retaining clips in the channel under the seal, gently pull

up on the plastic cowl cover at the base of the windshield, gently pull the

elbow connection on the left side of the windshield. Carefully remove the plastic cowl and set o

5. Remove 7mm screws retaining the plastic firewall cover, and remove the firewall cover.

6. Remove the bolts retaining the right side wiper arm shaft and slide to the right.

1. Carefully set the strut tower brace on to the strut towers, level the bar laterally in the vehicle, be sure to

leave enough material at both strut towers end plates to allow for drilling and bolting. Make sure the brace

the strut towers. Carefully mark the bolt holes using the punch, this will set how the bar

rilling the holes. Drill the holes in the strut towers.

2. Bolt the brace in place using the supplied 1” button head cap screws, AN washers, SAE flat washers, and

3. Using the strut brace as a guide mark the holes in the firewall with the punch. Remov

4. Slip the firewall nut plate into the cowl use the hardened washers as spacers, temporarily use the 3/8 hex

head bolts to retain the nut plate in place. Bolt the nut plate in place using the ¼ button he

SAE washers, and locking nut. Remove the 3/8 hex head bolts and install the strut tower brace use the long

tton head cap screws in the firewall brace with AN washers.

PARTS LIST

Edelbrock Corporation

2700 California St.

Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

PN Qty. Description

25-4049 1Strut Tower Brace Assembly

22-5224 1Installation Kit

It may be necessary to periodically tighten the strut tower hardware. This Strut Tower Brace

can be complemented with other Edelbrock Suspension components and Edelbrock IAS

Shocks and Struts. Check with your retailer.

5. Trim the plastic firewall cover to fit with the strut tower brace and install. Slide and bolt the wiper shaft

e. Replace the plastic cowl cover be sure to reconnect the washer fluid line, install the hood

appropriate location. Fasten the fuse block in its bracket and bolt small fuse

6. Check for any interference with the wiring, throttle cable, transmission kick down cable, and hoses.

ASSEMBLY (Continued)

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 68782 Bedienungsanleitung

Edelbrock

Edelbrock 73827 Bedienungsanleitung

Edelbrock

Edelbrock 6883 Bedienungsanleitung

Edelbrock

Edelbrock 6564 Bedienungsanleitung

Edelbrock

Edelbrock Performer RPM 60219 Bedienungsanleitung

Edelbrock

Edelbrock 70403 Bedienungsanleitung

Edelbrock

Edelbrock 73802 Bedienungsanleitung

Edelbrock

Edelbrock 67452 Bedienungsanleitung

Edelbrock

Edelbrock 67312 Bedienungsanleitung

Edelbrock

Edelbrock 70028 Bedienungsanleitung

Edelbrock

Edelbrock 262-400 Bedienungsanleitung

Edelbrock

Edelbrock Russell R09392S Bedienungsanleitung

Edelbrock

Edelbrock 1901 Bedienungsanleitung

Edelbrock

Edelbrock 5674 Bedienungsanleitung

Edelbrock

Edelbrock 6502 Bedienungsanleitung

Edelbrock

Edelbrock 5769 Bedienungsanleitung

Edelbrock

Edelbrock 2832 Bedienungsanleitung

Edelbrock

Edelbrock 1478 Bedienungsanleitung

Edelbrock

Edelbrock PRO-FLO XT 3527 Bedienungsanleitung

Edelbrock

Edelbrock Intake Manifolds Anwendungshandbuch

Edelbrock

Edelbrock Honda XR400 Betriebsanleitung

Edelbrock

Edelbrock 71852 Bedienungsanleitung

Edelbrock

Edelbrock 5486 Bedienungsanleitung

Edelbrock

Edelbrock 5786 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung