Edelbrock 5711 Bedienungsanleitung

Brochure #63-5711

Rev. 8/07 - DA/mc

Page 1 of 2

Catalog #5711

Edelbrock Cat-back Exhaust System

Catalog #5711

for 2007-2008 1500 Standard, Extended, & Crew Cab with

Short Bed (New Body Style)

Pick-Up, 4.8L & 5.3L V8, 2 & 4 W/D

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Cat-back Exhaust System. If you have any questions,

contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected].

Suggested Tools for Installation:

❑3/8" ratchet set with SAE and metric sockets ❑9/16” & 15mm wrench

❑Jackstands and jack ❑Liquid penetrant and rubber lubricant

DISASSEMBLY

1. Raise vehicle and support with proper jackstands for

the weight, leaving the suspension hanging.

2. Use caution around hot exhaust systems to avoid

burns.

3. Use penetrating oil on all nuts and bolts.

Note: Some GM Trucks have a brace bar attached to

the left and right side frame rails. Remove bolt and

swing bar out of the way during installation.

4. Remove the bolts and clamps from the system and

lubricate the rubber hangers.

5. Use a pry bar to pull the rubber isolators off of the

pipe hangers.

6. Remove the old system. In some cases, you will find

it easier to cut the overaxle pipe to remove it.

ASSEMBLY

1. Bolt I-Pipe to factory outlet flange (behind catalytic

converters). Install hanger clamp assembly #23-

4099 onto I-pipe and engage hanger bar into OE

isolator and snug the clamp. Note: Do not tighten

flange bolts at this time, (snug only).

2. Slip the muffler onto the intermediate pipe with a

3" band clamp on the front. Note: Inlet end of

muffler is marked. Snug the clamp so you can adjust

the system later.

3. Install a 3” band clamp onto the outlet of the muffler.

Slip the overaxle pipe into outlet of muffler.

4. Install hanger clamp assembly #23-4100 behind

band clamp and engage into OE isolator. Install

hanger clamp assembly #23-4042 onto outlet end of

overaxle pipe and engage into OE isolator. Snug

clamps for adjustments later.

5. Slip tailpipe onto overaxle pipe, and install 3” band

clamp.

6. Working from the front of the system, align and

tighten each pipe from the cat-back.

7. Check for clearance to body, frame, suspension and

driveline as you tighten the system from front to rear.

8. Re-attach the brace bar to frame rail (if equipped).

9. Check for leaks and correct, if any are found.

WARNING!!!

Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving!

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Brochure #63-5711

Rev. 8/07 - DA/mc

Page 2 of 2

Catalog #5711

KIT CONTENTS

WARNING: Support your vehicle with proper

jackstands or ramps rated for the total vehicle weight.

Place stands so that the rear axle is allowed to hang

free for easy system removal.

WARNING: These cat-back systems are engineered

to fit stock catalytic converters or equivalent

replacements. If you original system has been

modified, Edelbrock will not warranty fit or

performance.

Intermediate Pipe

Assembly

Muffler

Tailpipe

Assembly

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

Hanger Clamps

Overaxle Pipe

Qty. Part # Description

❑125-3282 I-Pipe Extended & Crew Cab

❑125-3295 I-Pipe Standard Cab

❑125-3166 Overaxle Pipe

❑125-3157 Tail Pipe

❑1 25-55725 Muffler

Qty. Part # Description

❑2 46-6613 3” Band Clamps

❑1 23-4099 Hanger / Clamp Assembly

❑1 23-4042 Hanger / Clamp Assembly

❑1 23-4100 Hanger / Clamp Assembly

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock Performer-Plus 2157 Bedienungsanleitung

Edelbrock

Edelbrock THUNDER SERIES AVS 1803 Bedienungsanleitung

Edelbrock

Edelbrock Russell R09761 Bedienungsanleitung

Edelbrock

Edelbrock Cat-Back Exhaust System 5714 Bedienungsanleitung

Edelbrock

Edelbrock 15008 Bedienungsanleitung

Edelbrock

Edelbrock EFI Fuel Pressure Regulators 1728 Bedienungsanleitung

Edelbrock

Edelbrock 5674 Bedienungsanleitung

Edelbrock

Edelbrock 97383 Bedienungsanleitung

Edelbrock

Edelbrock 8125 Bedienungsanleitung

Edelbrock

Edelbrock 2810 Bedienungsanleitung

Edelbrock

Edelbrock 1115 Bedienungsanleitung

Edelbrock

Edelbrock 6571 Bedienungsanleitung

Edelbrock

Edelbrock 2103 Gebrauchsanweisung

Edelbrock

Edelbrock Performer Series 8059 Bedienungsanleitung

Edelbrock

Edelbrock 70404 Bedienungsanleitung

Edelbrock

Edelbrock 71922 Bedienungsanleitung

Edelbrock

Edelbrock Honda Civic 67342 Bedienungsanleitung

Edelbrock

Edelbrock 5274 5274 Bedienungsanleitung

Edelbrock

Edelbrock Performer 2261 Bedienungsanleitung

Edelbrock

Edelbrock 2917 Nstallation Bedienungsanleitung

Edelbrock

Edelbrock 6606 Bedienungsanleitung

Edelbrock

Edelbrock 3865 Bedienungsanleitung

Edelbrock

Edelbrock 75284 Bedienungsanleitung

Edelbrock

Edelbrock 65892 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung