Edelbrock 5718 Bedienungsanleitung

Catalog #5718

Brochure No. 63-5718

Rev. 8/07- DA/mc

Page 1 of 2

CAT-BACK EXHAUST SYSTEM (SPLIT DUAL REAR EXIT)

For 2007 Toyota Tundra 5.7L V8 Double Cab

Catalog #5718

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Edelbrock Cat-Back Exhaust System. If you have any

questions, please contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard

Time or e-mail us at [email protected].

Suggested Tools for Installation:

❑3/8" ratchet and metric sockets

❑Jack and jackstands ❑Liquid penetrant and rubber lubricant

DISASSEMBLY

1. Raise and support vehicle.

2. Use spray penetrating oil on all hardware and rubber

isolators. Remove the V-clamp behind the muffler

and remove the overaxle / tailpipe assembly.

3. Unbolt the two flanges on the inlet pipes and remove

the muffler section of the exhaust. NOTE: Re-use of

the original gaskets and bolts on new system is

required.

ASSEMBLY

1. Using the original gaskets and bolts install supplied

left #25-3287 and right #25-3288 inlet pipes and

place hanger in to the rubber isolators.

2. Slip muffler on to the inlet pipes using two 2 ½”

band clamps. NOTE: Inlet end of muffler is marked.

Snug the clamps at this time.

3. Install hanger clamp #23-4103 into the rubber

isolator located at the rear of muffler. Now install

both extension pipes #25-3290 using two 2 ½” band

clamps. NOTE: Only snug the clamps so system can

be adjusted at the end of installation.

4. Install the over-axle assembly #25-3291 using two 2

½” band clamps.

5. Locating the pre-drilled hole on the frame, next to

the spare tire and the rear of the leaf spring on the

driver side. Install the frame hanger assembly #23-

4105 using the supplied hardware from the kit.

Snug the bolt for now and place the provided rubber

isolator on the hanger at this time (Refer to picture).

6. Install the left tailpipe #25-3293 using a 2 ½” band

clamp.

7. Using band clamp #23-1922 and the left side hanger

assembly #23-4104 install on tailpipe using the

supplied hardware placing the hanger in the isolator.

8. Install the right tailpipe #25-3294 using a 2 ½” band

clamp.

9. Using band clamp #23-1922 and the right side

hanger assembly #23-4106 install on tailpipe using

the supplied hardware placing the hanger in the

factory isolator.

10. Install both tailpipe tips #25-5582 using 2 ½” band

clamps.

11. Working from the front of the system to the rear.

Adjust, align, and tighten all the clamps and frame

mounted hangers. Give adequate clearance for fuel

lines, brake lines, electrical wiring, and the spare

tire.

WARNING!!!

Exhaust gas contains carbon monoxide, a deadly invisible gas.

Correct any leaks before driving!

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

Catalog #5718

Brochure No. 63-5718

Rev. 8/07- DA/mc

Page 2 of 2

KIT CONTENTS

Catalog #5718

Qty.Part # Description

❑1 25-3287 I-Pipe Assembly Left

❑1 25-3288 I-Pipe Assembly Right

❑2 25-3290 Extension Pipes

❑1 25-3291 Overaxle Assembly

❑1 25-3293 Tailpipe Assembly Left

❑1 25-3294 Tailpipe Assembly Right

❑2 25-5582 Tailpipe Tips

❑1 25-55773 Muffler

❑10 46-6610 Band Clamps

❑ 2 23-1922 Thick Band Clamps

WARNING: Support your vehicle with proper

jackstands or ramps rated for the total vehicle weight.

Place stands so that the rear axle is allowed to hang

free for easy system removal.

WARNING: These cat-back systems are engineered

to fit stock catalytic converters or equivalent

replacements. If your original system has been

modified, Edelbrock will not warranty fit or

performance.

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628

Office: (310) 781-2222

E-Mail: [email protected]

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 5672 Bedienungsanleitung

Edelbrock

Edelbrock 68782 Bedienungsanleitung

Edelbrock

Edelbrock 2860 Bedienungsanleitung

Edelbrock

Edelbrock 5220 Bedienungsanleitung

Edelbrock

Edelbrock 68932 Bedienungsanleitung

Edelbrock

Edelbrock 7107 Bedienungsanleitung

Edelbrock

Edelbrock 6606 Bedienungsanleitung

Edelbrock

Edelbrock Torker II 5021 Bedienungsanleitung

Edelbrock

Edelbrock E-Force 1580 Bedienungsanleitung

Edelbrock

Edelbrock Harley Nitrous Systems 63-0052 Bedienungsanleitung

Edelbrock

Edelbrock 6567 Bedienungsanleitung

Edelbrock

Edelbrock 5674 Bedienungsanleitung

Edelbrock

Edelbrock 6571 Bedienungsanleitung

Edelbrock

Edelbrock 17935 Bedienungsanleitung

Edelbrock

Edelbrock 29565 Bedienungsanleitung

Edelbrock

Edelbrock 66162 Bedienungsanleitung

Edelbrock

Edelbrock 70028 Bedienungsanleitung

Edelbrock

Edelbrock 5224 Bedienungsanleitung

Edelbrock

Edelbrock 97383 Bedienungsanleitung

Edelbrock

Edelbrock 72230 Bedienungsanleitung

Edelbrock

Edelbrock 2103 Gebrauchsanweisung

Edelbrock

Edelbrock 66152 Bedienungsanleitung

Edelbrock

Edelbrock Performer 1602 Bedienungsanleitung

Edelbrock

Edelbrock 4789 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung