Edelbrock 5734 Bedienungsanleitung

Brochure #63-0467

Rev. 5/06 - DA/mc

Catalog #5734

Page 1 of 2

Edelbrock Cat-Back Exhaust System

Catalog #5734

For 1994-1997 Dodge 1/2-Ton & 3/4-Ton,

2 & 4 WD, 5.2L & 5.9L, V8 Engines

INSTALLATION INSTRUCTIONS

Please study these instructions carefully before installing your new Cat-back Exhaust System. If you have any questions,

contact our Technical Hotline at: 1-800-416-8628 , 7am - 5pm, Monday-Friday, Pacific Standard Time or e-mail us at

[email protected]. Please fill out and mail your warranty card.

NOTE: Split exit exhaust systems on four-wheel drive vehiclles may require removal or relocation of spare tire.

Suggested Tools for Installation:

❑3/8" ratchet set and 15mm socket ❑Liquid penetrant

❑Jackstands ❑Oxy/Acetylene torch or equivalent (for removal of old system)

❑9/16” wrench

DISASSEMBLY

1. Raise vehicle and support with the proper jackstands,

leaving the rear suspension hanging.

2. Use caution around hot exhaust systems to avoid

burns.

3. Use penetrating oil on all nuts, bolts and rubber

hangers.

4. Remove the muffler clamp that precedes the stock

muffler. The stock system may have an extension pipe

which runs from catalytic pipe to the muffler. This

extension pipe must be retained when using the

Edelbrock cat-back system. Pry all rubber hangers

free from the stock system.

5. Remove the old system from the rear working forward

towards the catalytic converter. Use an Oxy/Acetylene

torch to heat the junctions of the old pipes to ease

removal.

ASSEMBLY

1. Install 2-1/2” band clamp on inlet end of I-pipe and

snug clamp.

2. Slip muffler onto 3” end of I-pipe using 3” band clamp.

Snug clamp.

3. Slip both overaxle pipes into muffler using 2-1/2” band

clamps. Slip hangers into place and snug clamps.

4. Attach right tailpipe to overaxle pipe using 2-1/2” band

clamp and snug clamp. Install hanger in stock location

using 5/16” x 2” bolt nut and fender washer (supplied).

5. Attach left tailpipe to overaxle pipe using 2-1/2” band

clamp. Hang the left pipe on the universal hanger

using U-clamp. Hold the pipe in position and align the

hanger strap with a slotted hole in the side of the frame

rail behind the shock absorber. Select the hole that

gives the best clearance, then bolt to frame.

6. The factory-installed bumper may vary as much as

3/4” in height. You may want to adjust your bumper for

optimum appearance. To make room for tip

installation, we suggest a minimum of 7/8” clearance

from the tailpipes to the bumper. Install tips using

supplied 2-1/2” band clamps.

7. Check for clearance to body, frame, and driveline as

you tighten the system from front to rear.

8. Start engine, check for any leaks and correct if any is

found.

WARNING!!!

Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving!

IMPORTANT NOTE:

Proper installation is the responsibility of the installer. Improper installation will void warranty and may

result in poor performance and engine or vehicle damage.

INSTALLATION INSTRUCTIONS

Brochure #63-0467

Rev. 5/06 - DA/mc

Catalog #5734

Page 2 of 2

Edelbrock Corporation, 2700 California St., Torrance, CA 90503

Tech Line: (800) 416-8628

E-Mail: [email protected]

Qty. PN Description

❑1 25-3150 I-Pipe assembly

❑1 25-3131 Overaxle pipe assembly (Left)

❑125-3132 Overaxle pipe assembly (Right)

❑125-3133 Tailpipe assembly (Left)

❑1 25-3134 Tailpipe assembly (Right)

❑2 25-5585 Tailpipe Tips

❑ 1 25-55760 Muffler assembly

❑ 1 - Universal hanger

❑ 1 - Band clamp; 3”

❑ 7 - Band clamp; 2-1/2”

❑ 1 - U-Clamp (Zinc); 2-1/2”

❑ 1 - Hex bolts; 5/16”-18 x 2”

❑ 1 - Nyloc nut; 5/16”-18

❑ 1 - Fender washer

KIT CONTENTS

Catalog #5734

Inhaltsverzeichnis

Andere Edelbrock Automobilteil Handbücher

Edelbrock

Edelbrock 15017 Bedienungsanleitung

Edelbrock

Edelbrock 352-428 Bedienungsanleitung

Edelbrock

Edelbrock 6560 Bedienungsanleitung

Edelbrock

Edelbrock 3864 Bedienungsanleitung

Edelbrock

Edelbrock 2934 Bedienungsanleitung

Edelbrock

Edelbrock 1115 Bedienungsanleitung

Edelbrock

Edelbrock 71884 Bedienungsanleitung

Edelbrock

Edelbrock 72282 Bedienungsanleitung

Edelbrock

Edelbrock PERFORMER RPM 60549* Bedienungsanleitung

Edelbrock

Edelbrock Russell 694540 Bedienungsanleitung

Edelbrock

Edelbrock 2917 Nstallation Bedienungsanleitung

Edelbrock

Edelbrock 9300 Betriebsanleitung

Edelbrock

Edelbrock 63-0358 Bedienungsanleitung

Edelbrock

Edelbrock 66042 Bedienungsanleitung

Edelbrock

Edelbrock Kawasaki KFX400 Bedienungsanleitung

Edelbrock

Edelbrock 3842 Bedienungsanleitung

Edelbrock

Edelbrock 5708 Bedienungsanleitung

Edelbrock

Edelbrock 3862 Bedienungsanleitung

Edelbrock

Edelbrock 63-0181 Bedienungsanleitung

Edelbrock

Edelbrock 63-0342 Bedienungsanleitung

Edelbrock

Edelbrock 351-M/400 Bedienungsanleitung

Edelbrock

Edelbrock 72950 Bedienungsanleitung

Edelbrock

Edelbrock 5672 Bedienungsanleitung

Edelbrock

Edelbrock 17932 Bedienungsanleitung

Beliebte Automobilteil Handbücher anderer Marken

Dakota Digital

Dakota Digital 650277 Bedienungsanleitung

bosal

bosal 037031 Bedienungsanleitung

Vintage Air

Vintage Air 571063 Bedienungsanleitung

GFB

GFB EX38 Bedienungsanleitung

bosal

bosal 028091 Bedienungsanleitung

Dodge

Dodge 8W-43 Kurzanleitung

ICI

ICI Magnum FBM10DGN Bedienungsanleitung

Volant Perfomance

Volant Perfomance 19435 Bedienungsanleitung

BENDIX

BENDIX GEN 4 GEN 5 ABS Bedienungsanleitung

Vintage Air

Vintage Air 571065 Bedienungsanleitung

Rugged Ridge

Rugged Ridge 11503.13 Bedienungsanleitung

BENDIX

BENDIX CYCLONE DURADRAIN TRAILER WATER Bedienungsanleitung

Porsche

Porsche 968 - ASSEMBLY INSPECTION PROCEDURE AND MAINTENANCE... Leitfaden

Sumitomo

Sumitomo FINE CYCLO FC-A 15 G Bedienungsanleitung

Toshiba

Toshiba 48-1250 A Bedienungsanleitung

aldes

aldes EHT2 Bedienungsanleitung

Go Rhino

Go Rhino 24371T Bedienungsanleitung

BBK

BBK 18950 Bedienungsanleitung